So last night/morning (5am) I started machining stuff for the very first time! I cut the tube, square bar, and shafting into smaller chunks using some massive horizontal bandsaw, and then turned the round parts down to the correct length. I grabbed some plastic round from the scraps bin and turned down the plastic ring that supports the flux ring. The most important operation of the night was the mods to the 2820 motor I am using for the drum. I chucked the can in the lathe and turned the endbell off. Then I had to bore the mount for the stator to 3/8" using the semi-shoddy drill press.
So this is what I ended up with for the night. Enough material for 2 drums. Everything turned out perfect except the bore for the ring was about 1mm too large. I may end up re-doing that part, or buffering it with tape and glue.
Hey Guys !
ReplyDeleteUSA Fresh & Verified SSN Leads AVAILABLE with best connectivity
All Leads have genuine & valid information
**HEADERS IN LEADS**
First Name | Last Name | SSN | Dob | DL Number |Address | State | City | Zip | Phone Number | Account Number | Bank Name
*Price for SSN lead $2
*You can ask for sample before any deal
*If anyone buy in bulk, we can negotiate
*Sampling is just for serious buyers
==>ACTIVE & FRESH CC FULLZ ALSO AVAILABLE<==
->$5 PER EACH
->Hope for the long term deal
->Interested buyers will be welcome
**Contact 24/7**
Whatsapp > +923172721122
Email > leads.sellers1212@gmail.com
Telegram > @leadsupplier
ICQ > 752822040