tag:blogger.com,1999:blog-15889841947593181172024-03-16T14:53:06.825-04:00+C : The Variable ConstantModeling life's dichotomies one integration at a time.Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.comBlogger93125tag:blogger.com,1999:blog-1588984194759318117.post-19395972099453316812019-09-05T22:41:00.000-04:002019-09-05T22:42:09.446-04:00Reflections from 4 years of Silent SpringTo be honest, I didn't follow the <a href="http://runamok.tech/hall_of_fame.html">Combat Robot Hall of Fame</a> so I had no idea that folks had nominated and voted in Silent Spring until it already happened. Still, I recognize this is a huge honor! It is recognition from my peers and competitors that Silent Spring is a bot to be remembered. In addition, it is the first beetleweight to be inducted as well! Wow!<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://1.bp.blogspot.com/-HfNtslRxlvo/XXB22EUkmmI/AAAAAAAAEto/vQ4oUchCB0gwaXw5Z29ZuNOwQGpN-9bQQCLcBGAs/s1600/old.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="184" data-original-width="900" height="80" src="https://1.bp.blogspot.com/-HfNtslRxlvo/XXB22EUkmmI/AAAAAAAAEto/vQ4oUchCB0gwaXw5Z29ZuNOwQGpN-9bQQCLcBGAs/s400/old.JPG" width="400" /></a></div>
<br />
<br />
I took this chance to <a href="https://thevariableconstant.blogspot.com/p/silent-spring-3lbs.html">update the page on Silent Spring</a> (especially the picture >_>) and realized how far the bot has come from the initial design. I first up-scaled DDT just to have a beetle to compete alongside my ant. Dominant Mode was totaled the year prior by Aaron and Margin of Safety so I needed another robot to spend my time at events. At first the bot sucked; it overheated on the weapon frequently from being undersized and the drive was tiny so it couldn't maneuver or dodge opponents. Still, when it connected a solid hit it made such an explosion it made me want to maintain it. Bit by bit I improved its reliability until, despite the huge impacts weapon-to-weapon, it survived and started winning.<br />
<br />
It is because of this evolution, I had a chance to reflect on how far my own engineering has come. I will share here, briefly, 10 things in random order I have learned that all builders could benefit from.<br />
<br />
<b>1) If it is supposed to move, leave clearance around it... and then add more clearance.</b><br />
One mistake I see many builders make is they design their bots too compact and tight. Sure it looks nice, but you have to remember that metal (and plastic) can/will bend and your bot will take damage; if it bends and jams up your drive motor or spinning weapon, it is as good as done! Adding some extra space ensures you can take some abuse and keep going. This goes for wires for those pesky motor-in-drum weapons too.<br />
<br />
<b>2) Don't over constrain your bearings!</b><br />
Overconstraint is when an object is held firmly by too many ways simultaneously. This may be fine with structures, but for bearings and mechanisms its a huge efficiency loss. For bearings specifically, it preloads the bearing which can add friction, decreasing max speed and increasing failure rate.<br />
<br />
<b>3) Test ahead of time (but do it safely)!</b><br />
In addition to competition preparedness, you also need to make sure your bot will work reliably. This doesn't mean build the entire thing and smash stuff on your drive way, it also means testing out and verifying performance on a component-level. Especially with new technologies or mechanisms, leave yourself time to understand them fully and find out if they will fail in your application. I remember the first time I tried brushless drive on Attrition, I ultimately failed because I was under a tight timeline. There is a lot you can test before putting the bot into the arena!<br />
<br />
<b>4) Be prepared!</b><br />
The number of competitor robots at an event is at an all-time high so matches will come quickly. Sometimes you win and sometimes you lose but in either case you must be able to recover quickly otherwise you will lose from bleeding wounds. Make, purchase, and prepare your spares. Assemble them into nearly battle-ready states before the event. Anticipate where you will take damage and make more spares of those. Being fully prepared may take hours or even days but in contrast that is time you wont have at the event. Better safe than sorry!<br />
<br />
<b>5) Don't underestimate the importance of padding around the delicate stuff!</b><br />
In this mechanical sport, its easy to forget about the electrical bits and they aren't nearly as durable. I have had electrical components fall off the board from impacts and it is both hard to diagnose and incredibly frustrating. However there is an easy solution: just add padding! Padding smooths the motion of components held within so they don't feel as much shock. Make sure to remove hard connections to the electronics so they can move. Also be mindful of the wires! Strain relive them so the electronic component's inertia doesn't pull the joints apart and protect them with sleeving to they don't abrade on internal surfaces over time.<br />
<br />
<b>6) Just because it is squish, doesn't mean it cant be armor.</b><br />
A large focus on armor and defense has been hard armor and deflecting surfaces. It is a good strategy but hard armor in most cases means metal and that is weight that many bots cannot afford. An underappreciated defense strategy has been using compliant mechanisms like rubber or thin plastic sheeting to absorb energy. The idea that a material in a certain geometry can deflect within the elastic regime so it doesn't deform permanently and spring back. Combined with a naturally tough material, this can be very good for surviving glancing hits or blunt impacts. Just ask HUGE!<br />
<br />
<b>7) When in doubt, make it stout.</b><br />
Just like the first version of Silent Spring was very glass cannon, if you want to win reliability is your friend. It is okay if you aren't the strongest, being tougher will get your further. So oversize the critical parts just a bit more and outlast your opponent.<br />
<br />
8<b>) Do not use screws in shear!</b><br />
Screws are made for tension, not shear. Shoulder bolts are okay because the shoulder is hardened and acts as a pin.<br />
<br />
<b>9) Build something crazy occasionally: try something new!</b><br />
I love maintaining my competitive designs and trying to innovate upon them bit by bit but it is super fun to try a completely off-the-wall design. Some of the most fun moments of my robot fighting career have been making silly robots (assbots) with my friends. Some examples of bots I made with my friends include "prop quiz", "melty butt", "HAM slicer", "exitbot", and the OG "colsonbot". More recently I built "green eggs and HAM" with Xo and Aaron. Think of it as a dumb melty brain spinner x SOW. We built it quickly out of garbage but miraculously it worked and showed some potential for a future bot type.<br />
<br />
<b>10) Have fun!</b><br />
Because if you're not enjoying what you do, what is the point?!Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com5tag:blogger.com,1999:blog-1588984194759318117.post-83782147658018958992018-01-22T20:46:00.000-05:002018-01-22T20:46:18.321-05:00Custom Wheels for Silent SpringLets relive an event from a few months ago at Franklin Institute 2017...<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://3.bp.blogspot.com/-DWsju36nFBI/WmaNTIUQHrI/AAAAAAAAEVo/daltnFsx5ukwGBy-ILj44yVPQR--BYiogCLcBGAs/s1600/DSC_2812%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="900" data-original-width="1600" height="180" src="https://3.bp.blogspot.com/-DWsju36nFBI/WmaNTIUQHrI/AAAAAAAAEVo/daltnFsx5ukwGBy-ILj44yVPQR--BYiogCLcBGAs/s320/DSC_2812%255B1%255D.JPG" width="320" /></a></div>
<br />
<br />
Ouch. But this didnt happen in a way you might expect.<br />
<br />
This was Silent Spring's "all-terrain" mode in which the normal lite-flite wheels were swapped out for sumo, D2-esque, tires. These wheels were wider and so the wheel guards had to go. A few minutes into the fight, SS was flying around as usual against the eventual champion Captain Doom when suddenly the tires started flying off the wheels! Ugh! Turns out the foam was held on by nothing more than some hard CA glue which adhered poorly over the injection molded ABS hubs. The other wheel came off shortly after and the match was over.<br />
<br />
Needless to say, I dumped that concept about 1 minute after the match but it did raise some interesting thoughts for the future. Wheel science. Most insect builders just buy fingertech foams, lite-flites, or Botkits sumo wheels. How hard could it be to make my own and what was the best material to do so with?<br />
<br />
It so turns out that most dragster and model airplane wheels are a neoprene foam but even so that comes in a variety of durometers, or hardnesses. Some closer inspection on the wheel hubs and we discover that the wheels I bought actually originate from <a href="http://tmrcracing.com/aboutus.sc">TM Racing Components</a>.<br />
<br />
They sell a bunch of different compounds denoted by the color. I believe the D2 and Servo City variety are ~30-40 durometers by feel. I am told by another builder experienced in competitive RC that these color designations for durometer dont stay true always between manufacturers. How confusing :/<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://1.bp.blogspot.com/-PdyNWLqp_w4/WmaOb1cmgnI/AAAAAAAAEV0/HWg-EZdTlAQo1VCXQPh7ar-ows6Gt6qZgCLcBGAs/s1600/DSC_2832%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="900" data-original-width="1600" height="180" src="https://1.bp.blogspot.com/-PdyNWLqp_w4/WmaOb1cmgnI/AAAAAAAAEV0/HWg-EZdTlAQo1VCXQPh7ar-ows6Gt6qZgCLcBGAs/s320/DSC_2832%255B1%255D.JPG" width="320" /></a></div>
<br />
<br />
I bought a handful of their custom sizes to experiment. Standard (40), Gold, Cali 35, and Purple (40) in order from soft to stiff. What properties are most important for wheels in combat robotics? A soft wheel will deform under load which is great for impact absorbing and forming a traction patch. However a soft compound might tear easily and subject to damage. A stiffer wheel is a reliable diameter which is important for some designs but susceptible to debris and can transmit loads to the gearmotor. I did some slice tests with a knife and found the standard compound to be too soft; it took knife marks and cuts very easily whereas the other three didnt make a mark. I ended up picking the gold compound for starters because it comparable stiffness to the lite flites I used to use. I might return to this section later with numerical data.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://2.bp.blogspot.com/-MS4V_B22ALg/WmaSkho0GBI/AAAAAAAAEWA/PpURTb0tQA0N5d64ekItXLo-oHpzvSeNQCLcBGAs/s1600/DSC_2919%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="900" data-original-width="1600" height="180" src="https://2.bp.blogspot.com/-MS4V_B22ALg/WmaSkho0GBI/AAAAAAAAEWA/PpURTb0tQA0N5d64ekItXLo-oHpzvSeNQCLcBGAs/s320/DSC_2919%255B1%255D.JPG" width="320" /></a></div>
<br />
<br />
To my dismay, they came in oversized and with varying thicknesses. The ID was true which leads me to believe the wheels are supposed to be trued after mounting. I whipped up my own wheels which adapted to the botkits wheel hubs. They were printed from NylonX and features bolt patterns for 0.625 and 0.770 hubs. 1/4" pilot in the center for concentricity. The plan to true the wheels is to first glue the tires to the wheels and then turn them on a lathe using a round carbide burr. The 0.770 bolt pattern is for mounting to servo city hubs which I mount to the lathe.<br />
<br />
If you plan on doing this, be careful of a few things: Make sure everything is properly secured because it is a grippy wheel afterall and can fling things if not well attached. Dont pay too much attenton to the DRO on your lathe unless youre going for repeatable passes. The wheel deforms under turning so you might be overcutting on a pass to get the desired dimensions (but I guess you could calibrate that out if you really wanted to).<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://3.bp.blogspot.com/-c3HZZKTZ57c/WmaTgYk8m4I/AAAAAAAAEWM/tHBu-MGixIk9IeUVpjR9YTupbWm8YJSqACLcBGAs/s1600/DSC_2844%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="900" data-original-width="1600" height="180" src="https://3.bp.blogspot.com/-c3HZZKTZ57c/WmaTgYk8m4I/AAAAAAAAEWM/tHBu-MGixIk9IeUVpjR9YTupbWm8YJSqACLcBGAs/s320/DSC_2844%255B1%255D.JPG" width="320" /></a></div>
<br />
<br />
In just a few minutes time, the wheels were trued to desired size! A bit rough on the edges, but I found that a sanding block takes care of that fairly quickly.<br />
<br />
More to come!Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com13tag:blogger.com,1999:blog-1588984194759318117.post-18870444168182772642017-02-06T23:09:00.000-05:002017-02-08T13:05:17.932-05:00DDT: (Onyx) One filament to rule them all!<h2>
Upgrades: v3.5</h2>
DDT, my antweight (1 pound) combat robot, has seen much success and acclaim due in part to its adoption of the Markforged composite FFF technology. It has lead the curve in additive manufactured combat robots and at the time of this article holds the #2 ranking for its weight class, worldwide. Markforged has <a href="https://markforged.com/the-3d-printed-nylon-kevlar-combat-robot/">done a few</a> <a href="https://markforged.com/case-study/markforged-parts-tough-it-out-in-battle/">articles</a> about DDT and you may have seen a DDT replica as a display item at trade shows across the US.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://3.bp.blogspot.com/-ATzhLUKAX6w/WJk7JfZDNTI/AAAAAAAAENQ/wlpIgR-DCsUhcQ-T87jtDfuIOKFrEwsAwCLcB/s1600/14608948_10154591571846660_4120969106314644077_o.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="180" src="https://3.bp.blogspot.com/-ATzhLUKAX6w/WJk7JfZDNTI/AAAAAAAAENQ/wlpIgR-DCsUhcQ-T87jtDfuIOKFrEwsAwCLcB/s320/14608948_10154591571846660_4120969106314644077_o.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Failed pulley at FI 2016</td></tr>
</tbody></table>
<br />
<br />
As wondrous as composite 3D printing is, materials cannot compensate for design or fatigue. DDT suffered from some belt/pulley issues at Franklin Institute 2016 so I elected to update the weapon drive to 1/4 inverted MXL belts just like Silent Spring's weapon drive. This of course meant I had to rebuild the frame to accommodate for the thicker weapon pulleys. I swapped to Maxon 13mm gearheads while I was at it; this would save me space and weight for the heavier transmission system.<br />
<br />
That DDT frame was also a bit behind my 3D printed iteration curve. It still featured fiber in every layer and Silent Spring proved this was not necessary. But hey, why not take one step further? Fibers significantly improved the stiffness of frames made of nylon but the release of the new <a href="https://markforged.com/onyx/">Onyx material</a>, nylon with a percentage of chopped carbon fibers, proved that stiffness and strength could be achieved with that material alone. I decided as a challenge that the latest version of DDT would use Onyx material only. If this is successful, builders can create awesome parts for significantly less cost! What I am referring to is the new <a href="https://markforged.com/onyx-series/">Onyx One series of printers</a> that were released just a few months ago. They are limited in material capability compared to the Mark Two but you have access to Onyx prints for $3-4k which is approximately $10k less than the Mark Two. That is something hobbyists can more readily afford!<br />
<br />
As a test for the material, I elected to change as little of the design as I could. That should hopefully draw a direct comparison between the materials since the design elements stayed the same. An obvious variable is that DDT may not fight the same opponents at the MASS Destruction combat event, but we will have to assume that the forces the robot experiences will be similar between opponents. For the curious, that's a 50% infill. If you go fully dense in a large part you aren't fully utilizing the power of additive manufacturing!<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://4.bp.blogspot.com/-ZNvqDaRIC-0/WJk8PS4b8QI/AAAAAAAAENg/2Llkc0-Utoo6cmGuKXwW8EuX3Y2oNiI0gCLcB/s1600/Capture%2B1.PNG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="218" src="https://4.bp.blogspot.com/-ZNvqDaRIC-0/WJk8PS4b8QI/AAAAAAAAENg/2Llkc0-Utoo6cmGuKXwW8EuX3Y2oNiI0gCLcB/s320/Capture%2B1.PNG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Eiger slicing shows only Onyx!</td></tr>
</tbody></table>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://1.bp.blogspot.com/-e-5nuJZTunI/WJk8O18fcUI/AAAAAAAAENc/BDCaF2WJppQiEo6sJ1ei4LUezpta6DC-QCLcB/s1600/Capture.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="183" src="https://1.bp.blogspot.com/-e-5nuJZTunI/WJk8O18fcUI/AAAAAAAAENc/BDCaF2WJppQiEo6sJ1ei4LUezpta6DC-QCLcB/s320/Capture.PNG" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
</div>
<br />
<br />
With the continued software updates, the Markforged printers continue to impress. The support structures easily peel away and leave me with a usable part from the printer in less than 5 minutes. I had to bore out the motor mounting holes because the support structure droops at the top of the circle but I could have easily compensated for that by designing it as a teardrop shape. Remember, Onyx material can print at ~30 degrees from the horizontal without needing support!<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://1.bp.blogspot.com/-P4arGHpSN9Y/WJk5qwjUF_I/AAAAAAAAEMk/gWKzxu6DaLs4Cbv2yJGEWZH94apQxhOkQCLcB/s1600/DSC_1992%255B1%255D.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="180" src="https://1.bp.blogspot.com/-P4arGHpSN9Y/WJk5qwjUF_I/AAAAAAAAEMk/gWKzxu6DaLs4Cbv2yJGEWZH94apQxhOkQCLcB/s320/DSC_1992%255B1%255D.JPG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Fresh print right off the Markforged</td></tr>
</tbody></table>
<br />
<br />
The electronics transplant was quick, even with the motor swap. It looks like when the disk cracked, part of it flexed and actually hit the pulley which caused the delamination. a portion of that energy actually bent the stator mount in my Hacker A20L! No wonder the belt distances were too close!<br />
<br />
The blade mount was updated for the double washer load distribution assembly which I found absolutely necessary to keep everything stiff in plastic insect robots. To summarize, the large face aluminum parts increase the amount of area subjected to forces and is less likely to plastically deform after frequent shock loads. Small but precision spacers keep the inner races in compression while the outer races can float axially; this keeps things from being over constrained which allows longer bearing life and higher efficiency.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://4.bp.blogspot.com/-09p0dGNmngE/WJk50SJ1AfI/AAAAAAAAEMo/PIDyQs078jUvgDrecWjLklcSgbQdj92nACLcB/s1600/DSC_2021%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="https://4.bp.blogspot.com/-09p0dGNmngE/WJk50SJ1AfI/AAAAAAAAEMo/PIDyQs078jUvgDrecWjLklcSgbQdj92nACLcB/s320/DSC_2021%255B1%255D.JPG" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://1.bp.blogspot.com/-ntJrempQOqs/WJk54kMuHtI/AAAAAAAAEMw/FkWIv8uFTwQNaIScvLLDVD35Llua44MKwCLcB/s1600/DSC_2023%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="https://1.bp.blogspot.com/-ntJrempQOqs/WJk54kMuHtI/AAAAAAAAEMw/FkWIv8uFTwQNaIScvLLDVD35Llua44MKwCLcB/s320/DSC_2023%255B1%255D.JPG" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://1.bp.blogspot.com/-HxI7dZ6-AQw/WJk572GZPMI/AAAAAAAAEM0/2G3geKcNg58OCMlmZLh035xYbVFybWI5wCLcB/s1600/DSC_2025%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="https://1.bp.blogspot.com/-HxI7dZ6-AQw/WJk572GZPMI/AAAAAAAAEM0/2G3geKcNg58OCMlmZLh035xYbVFybWI5wCLcB/s320/DSC_2025%255B1%255D.JPG" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://4.bp.blogspot.com/-9Kb4opQS120/WJk5_aodhxI/AAAAAAAAEM4/on8YbpebGtg1AO1piFPODfZebt20I4P4gCLcB/s1600/DSC_2026%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="https://4.bp.blogspot.com/-9Kb4opQS120/WJk5_aodhxI/AAAAAAAAEM4/on8YbpebGtg1AO1piFPODfZebt20I4P4gCLcB/s320/DSC_2026%255B1%255D.JPG" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://2.bp.blogspot.com/-YL9ugtsSUMQ/WJk6FZOqk-I/AAAAAAAAENA/8CbMlmSJP4QQKTFdBinwx9eye6nueJfeQCLcB/s1600/DSC_2033%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="https://2.bp.blogspot.com/-YL9ugtsSUMQ/WJk6FZOqk-I/AAAAAAAAENA/8CbMlmSJP4QQKTFdBinwx9eye6nueJfeQCLcB/s320/DSC_2033%255B1%255D.JPG" width="320" /></a></div>
<br />
<br />
The wheel guards are 1/16" nylon machined on the waterjet cutter. They were brushed with scotch brite in the long direction to match the layer striations and matte finish of the Onyx material.<br />
<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/cmwjQH-I4GY?rel=0&showinfo=0" width="560"></iframe>
<br />
<br />
The last part to make was the blade. I still had the 'bash blade' from old versions of DDT but I needed a new standard blade for use against most robots. I managed to cut one last blade from the 3/32" O1 plate that I had but this time decided to temper the blades. At first quench I achieved full hardness at 65 RC but them tempered the blades down to 54. This should give me more toughness but plenty of hardness.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://4.bp.blogspot.com/-kmu61Q87zYk/WJkwhVFFO9I/AAAAAAAAEMI/zkLrv-iMmY40SoG8M_mXk_-D0gtadOhUQCLcB/s1600/DSC_2124.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="320" src="https://4.bp.blogspot.com/-kmu61Q87zYk/WJkwhVFFO9I/AAAAAAAAEMI/zkLrv-iMmY40SoG8M_mXk_-D0gtadOhUQCLcB/s320/DSC_2124.JPG" width="180" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://4.bp.blogspot.com/-eaOurnZGrdI/WJkwhREH5SI/AAAAAAAAEMM/lDry6V_Kpnc-24tktS50nX6dtW5LulIUgCLcB/s1600/DSC_2125.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="320" src="https://4.bp.blogspot.com/-eaOurnZGrdI/WJkwhREH5SI/AAAAAAAAEMM/lDry6V_Kpnc-24tktS50nX6dtW5LulIUgCLcB/s320/DSC_2125.JPG" width="180" /></a></div>
<br />
<br />
The completed robot weighed in at 15.5 oz which is lighter than previous versions of DDT. So naturally, I spent some time in decorating the robot with vinyl stickers.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://1.bp.blogspot.com/-DXjtBDFIHFo/WJkJliHRl9I/AAAAAAAAEL4/l7YvecGveAkqnxgP06qqLW-pY5QdzGjAQCLcB/s1600/DSC_2153.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="https://1.bp.blogspot.com/-DXjtBDFIHFo/WJkJliHRl9I/AAAAAAAAEL4/l7YvecGveAkqnxgP06qqLW-pY5QdzGjAQCLcB/s320/DSC_2153.JPG" width="320" /></a></div>
<br />
<br />
_____________________________<br />
<h2>
MASS Destruction 6: Watch the City Wreckage!</h2>
I took this new version to our local competition, MASS Destruction, which was hosted by the Charles River Museum of Industry and Innovation and ironically sponsored by Markforged. There was a great turnout and many fearsome robots including the defending champion "Foiled", a undercutter robot which featured a turbine-spoke disk to give it additional down force; this robot was printed on a Mark Two printer.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://2.bp.blogspot.com/-W9-Ymae-jyw/WJk-UBgPMXI/AAAAAAAAENw/I0fP0jX1FeY_S8Qlw7nPdwE0EXuJnHQSQCLcB/s1600/14962682_10207778445764547_6540332736237383558_n.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="180" src="https://2.bp.blogspot.com/-W9-Ymae-jyw/WJk-UBgPMXI/AAAAAAAAENw/I0fP0jX1FeY_S8Qlw7nPdwE0EXuJnHQSQCLcB/s320/14962682_10207778445764547_6540332736237383558_n.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">MASSDestruction 5 champion, "Foiled". Photo by Alex Crease</td></tr>
</tbody></table>
<br />
<br />
Long story short, the pure-Onyx frame worked wonderfully! The robot took and delivered hits without any unreasonable failures in the frame. As expected, when the frame is hit, it will take damage in that location but that is expected of any material. If anything, the overall damage was minimized because the hollow structure simply crushed in a localized area. If there were continuous fibers, the damage may have propagated to nearby sections of the chassis.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://4.bp.blogspot.com/-At1ouTwcPJk/WJlB9Ab_aMI/AAAAAAAAEOE/x2-w89g6CJcQe7qE0TY_3qwry_H8tRNaQCLcB/s1600/DSC01555.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="180" src="https://4.bp.blogspot.com/-At1ouTwcPJk/WJlB9Ab_aMI/AAAAAAAAEOE/x2-w89g6CJcQe7qE0TY_3qwry_H8tRNaQCLcB/s320/DSC01555.JPG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Damage from Foiled in our first match at MASS Destruction</td></tr>
</tbody></table>
<br />
<br />
DDT went undefeated through the day until it suffered a heartbreaking electrical problem in the last moments of the 'winner takes all' finals. That landed DDT with a 4-1 record and 2nd place. Who won 1st? None other than "Foiled" so really we can't be disappointed here. However, in my opinion, the real winner are the Onyx One printers because we've just shown that Onyx alone can hang in with the best of insect-class combat robots!<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://3.bp.blogspot.com/-ZeozI4ZGM48/WJlBzyIRqQI/AAAAAAAAEOA/f6XBdMs4vFQul70e-Zktn50QruVh-0i_gCEw/s1600/DSC01553.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="180" src="https://3.bp.blogspot.com/-ZeozI4ZGM48/WJlBzyIRqQI/AAAAAAAAEOA/f6XBdMs4vFQul70e-Zktn50QruVh-0i_gCEw/s320/DSC01553.JPG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">DDT takes 2nd place at MASS Destruction 6!</td></tr>
</tbody></table>
<br />
<br />
<h3>
Fight Breakdown</h3>
<b>W vs Foiled</b><br />
Right off the bat, I get the fight the champ. Foiled has more MOI than DDT's blade and its made from a tougher material (AR500 vs O1 tool steel). His wide stance and airfoil would likely mean he would look better if we exchanged impacts so my first thought would be to attack the wheels. That sounded like a great strategy but if I missed he would likely take my wheels! With the faster and more nimble drive, I decided that I would slowly edge his blade with mine at full speed and try to machine his blade down. What ended up happening is that my blade slid under his and started clipping his bolts! That caused him to go unbalanced and vibrate. Then I decided to be more decisive and attack his wheels to some success but at the same time taking some damage (as shown above). The match went full distance and the judges awarded DDT the victory.<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/tqpjwBxsE5E?rel=0&showinfo=0" width="560"></iframe>
<br />
<br />
<b>W vs Micro Mystery</b><br />
These girls were newcomers but it looked like they had experience with combat robotics before. The robot was no slouch; it had a very long undercutting bar which by eye could over reach DDT. I hoped we might be the same blade height otherwise it would end poorly for me (Silent Spring v Circuit Breaker @ Bot Blast 2016). But when they loaded in, Fred flipped over their robot. I think they had delayed which subjected them to the 'wheel of misfortune' in which one of the punishments is starting inverted. Fortunately for me, DDT's sleek profile was able to sneak under their overhead blade and hit the chassis before their blade could hit mine. After a few hits, the battery became exposed and by event policy, their robot would lose by KO.<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/jMiGmOV76Zo?rel=0&showinfo=0" width="560"></iframe>
<br />
<b><br /></b>
<b>W vs Eclair and Bonbon</b><br />
Ian finally upgraded from the toy transmitter and so he had full control of his bot. When he has full control, hes quite dangerous; his beetleweight "Quicksand" is evidence to his tenacity and driving skill. My strategy in this match was to maneuver around long enough to get to speed and deliver light, jousting hits. After removing some cosmetic pieces, I tried the 'spin slice' maneuver to hit higher up on the bot. One hit flipped him over and disabled his power. Tap out victory for DDT.<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/G4V4m2Jx1Tw?rel=0&showinfo=0" width="560"></iframe>
<br />
<br />
<b>W vs Eclair and Bonbon</b><br />
I aimed for the same strategy as the match before but this time we saw a more exciting result. DDT caught a lucky grab on part of Ian's bot and an explosion of parts signaled a KO victory.<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/rujekrCoNU8?rel=0&showinfo=0" width="560"></iframe>
<br />
<br />
<b>L vs Foiled</b><br />
Now in the finals, we find a familiar opponent! Foiled reversed his screws fastening the blade such that the button heads were facing down in an attempt to try and keep them from shearing off. But looking at our blade marks from last match I knew there was still a good chance of the same thing happening. My updated strategy was to disrupt his drive by forcing the blade to go unstable; I was able to slowly pull it off and started going for the wheels. As Foiled was no longer able to be the aggressor and took more damage, I thought I had the match won. However, one last tap dislodged a main power connector that was damaged in a previous competition and DDT shut down. Alex was a great sport and tried to revive DDT but to no avail; DDT was counted out in the final seconds of the match!<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/QLDE_azLtDU?rel=0&showinfo=0" width="560"></iframe>
Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com18tag:blogger.com,1999:blog-1588984194759318117.post-3545317680257269932016-01-07T02:36:00.000-05:002016-01-07T02:40:39.342-05:00Hasty Upgrades and MASSdestruction @ the Artisans Asylum 12/05/2015Since Franklin, I've only been searching for more ways to use/abuse the MarkForged composite 3D printer. DDT has shown great promise of the device in combat, allowing high design flexibility and better material properties than anything I could have machined (not an advertisement I swear!). Next, I plan on applying this technology to my other robots, starting with Silent Spring; I anticipate printing a new frame/design for the Dec 5th MASSdestruction event.<br />
<br />
I also apologize in advance because I have recently seen the new Star Wars twice recently in addition to all 6 movies prior so this post might feel more Force'd than usual.<br />
<h2>
A New Design</h2>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-pZNbqZM21fs/Vo4KGBHXg7I/AAAAAAAAECk/hXvl9DgEq_0/s1600/3DT_v02.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="154" src="http://1.bp.blogspot.com/-pZNbqZM21fs/Vo4KGBHXg7I/AAAAAAAAECk/hXvl9DgEq_0/s320/3DT_v02.PNG" width="320" /></a></div>
<br />
Converting the v1 Silent Spring to v2 should not have been very difficult since DDT v3 was so successful; there were little to no weaknesses that needed to be addressed. As a result, I followed the same methodology in designing DDT. I'll elaborate more on my design methods in a later post (I have most of it written up I promise!).<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-S1If8lfo5fw/Vo4GcMqMyDI/AAAAAAAAEB8/g4D0l9-4YvE/s1600/compare.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="148" src="http://2.bp.blogspot.com/-S1If8lfo5fw/Vo4GcMqMyDI/AAAAAAAAEB8/g4D0l9-4YvE/s320/compare.PNG" width="320" /></a></div>
<br />
As a result, the v2 Silent Spring looks unsurprisingly similar to DDT. I at one point made an argument against myself to remove the pockets but in actuality they have an added benefit to the MF machine. The pockets direct fiber paths in slicing which in effect creates higher density of fiber in places deemed more valuable.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-G7ziq7aPg0c/Vo4IHHrgG8I/AAAAAAAAECI/T5VcYjAV5b8/s1600/fiber%2Brouting.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="320" src="http://3.bp.blogspot.com/-G7ziq7aPg0c/Vo4IHHrgG8I/AAAAAAAAECI/T5VcYjAV5b8/s320/fiber%2Brouting.PNG" width="292" /></a></div>
<br />
One place the designs may have differed is at the wheel output shafts. On DDT, the wheels are directly drive off the outputs of the spark gearmotors but a similar scheme may not be as effective here because the drive motor options for Beetleweights have shafts which are too small. For example, the B-series motors and Kitbots '1000 RPM' motors have shafts 4mm in diameter which is disproportionate to the 3mm shafts used in Antweights, like DDT. Therefore I had whipped up a solution where the gearmotor shaft would couple to a larger diameter shaft which was further supported by additional bearing sets.<br />
<br />
I ended up ditching the idea when I learned that Mark at ROVParts was selling <a href="http://www.shop.rovparts.com/22mm-12v-DC-Gear-Motor-780-RPM-RP-GM-22-12V780.htm">B-series gearmotors with hardened S7 output shafts</a>. Simplicity woooo! The new design intends on using wheel guards anyway so I HOPE this will be a moot point as such on DDT.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-vqyceGVVs54/Vo4Isgr3mOI/AAAAAAAAECQ/f01UyvEBzSo/s1600/3DT%2Buniframe%2Bassy.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="148" src="http://3.bp.blogspot.com/-vqyceGVVs54/Vo4Isgr3mOI/AAAAAAAAECQ/f01UyvEBzSo/s320/3DT%2Buniframe%2Bassy.PNG" width="320" /></a></div>
<br />
Although the robot was designed as a unibody, the printer volume actually could not handle the Beetle-sized DDT frame and as a result, the frame corners had to be chopped into four additional parts which would be combined into the unibody later using screws and adhesives.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-beiQVxPGkaU/Vo4J3-9G9jI/AAAAAAAAECc/QrxfJkFMLo4/s1600/3DT_v02%2Binernal.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="148" src="http://2.bp.blogspot.com/-beiQVxPGkaU/Vo4J3-9G9jI/AAAAAAAAECc/QrxfJkFMLo4/s320/3DT_v02%2Binernal.PNG" width="320" /></a></div>
<br />
The internals, like DDT, would require some minor electrical work. I purchased a new motor (NTM 35-36) and new ESC (Turnigy Plush 40A) for this project. To make everything fit, I would need to move the capacitors off the board and into a floating unit as pictured above. If you do this, be sure to keep the wires short and thick as they are bus capacitors. Im not entirely happy with this arrangement mostly due in part to the capacitors off the BotBitz ESCs. It is possible I shouldnt need those since i have bus capacitors from the weapon ESC. Instead, I could combine the capacitors and use electrolytics of equivalent capacitance.<br />
<br />
<h2>
The Printer Strikes Back</h2>
Just like the new DDT frame, this frame proved to be rather ambitious for the printer. This is by no means saying the printer is incapable, but rather the design needs to be modified to print more reliably. The access hole for the electronics is a removable panel on the back. This opens up to a cavity in the frame which is created by printing the roof over a bed of support material. However I discovered that the printer could not reliably make these features as so the rate of failure was fairly high. As a result, I managed to print the extra items such as the corners, back plate, and wheel guards but not the main frame itself. I will need to develop a interim solution for the Dec 5th event.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-y6cPdu2nd8Y/Vo3NEr_8JaI/AAAAAAAAEA8/gAU2hqJ1b0k/s1600/DSC_0855%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="http://1.bp.blogspot.com/-y6cPdu2nd8Y/Vo3NEr_8JaI/AAAAAAAAEA8/gAU2hqJ1b0k/s320/DSC_0855%255B1%255D.JPG" width="320" /></a></div>
<br />
<h2>
Return of the Old Design</h2>
With only ~2 days left, I began a mad rush to retrofit the v1 frame for the competition. As it stood, Silent Spring could compete with the damage it took at Franklin. However, some upgrades were planned regardless and I wanted another chance to try the MarkForged printed material. At minimum, the electrical system was better organized with shorter wire lengths. I also replaced the Turnigy AE 30S ESC with a Spider ZTW 40A ESC. Hopefully this will alleviate spinup and overtemp issues experienced in combat. The Spider ESC was also preloaded with SimonK firmware which has been making quite the buzz lately for its excelling sensorless startup performance; between the higher current and SimonK, I had high expectations for this new ESC.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/--5P-e6Ymigk/Vo3J-nIVkTI/AAAAAAAAEAg/Cj211lQARjo/s1600/3DT%2Bv1.5.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="185" src="http://1.bp.blogspot.com/--5P-e6Ymigk/Vo3J-nIVkTI/AAAAAAAAEAg/Cj211lQARjo/s400/3DT%2Bv1.5.PNG" width="400" /></a></div>
<br />
The v1 frame files were modified lightly to better use additive manufacturing. The back plate was extended, thickened, and pocketed to provide coverage over the motor pulleys and provide additional space to hide the BotBitz ESCs.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-MxE3GSei-LA/Vo3KMwgfoQI/AAAAAAAAEAo/gHLERtQYxyo/s1600/frame%2B2.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="185" src="http://2.bp.blogspot.com/-MxE3GSei-LA/Vo3KMwgfoQI/AAAAAAAAEAo/gHLERtQYxyo/s400/frame%2B2.PNG" width="400" /></a></div>
<br />
In the A-frame section, the trusses were thickened and the motor mount holes were made slightly taller. These changed allowed for more carbon but also reduced the overall part count (the aluminum "C" spacer could be removed). Another fun change was switching the round hole to a hex hole in the interface wings. Normally, this section required a large hole for a socket to reach the locknut. Now, the hole could be changed into a hex designed to fit the 3/8" hex such that no additional tooling was needed to tighten the outboard shoulder screws.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-EB_xaSAVqZQ/Vo2uz3ZtOmI/AAAAAAAAEAE/jkOch-HubOo/s1600/DSC_0907%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="http://4.bp.blogspot.com/-EB_xaSAVqZQ/Vo2uz3ZtOmI/AAAAAAAAEAE/jkOch-HubOo/s320/DSC_0907%255B1%255D.JPG" width="320" /></a></div>
<br />
Both of these printed parts finished at 1pm Friday, just hours before the event Saturday morning. Both parts came in lighter by ~50% compared to their SolidWorks projections for "solid" material yet were about as a stiff and a 7075 aluminum frame.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-iUXxMv3gRJk/Vo4NHroaFQI/AAAAAAAAECw/qzmMos4mu9s/s1600/DSC_0905%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="http://2.bp.blogspot.com/-iUXxMv3gRJk/Vo4NHroaFQI/AAAAAAAAECw/qzmMos4mu9s/s320/DSC_0905%255B1%255D.JPG" width="320" /></a></div>
<br />
<br />
I took the opportunity to make a few other changes as well. I fell in love with the Fingertech Robotics snap hubs so I decided to make my own. I further integrated them into the drive pulleys as shown above. This provided a minimal solution to indirect drive with easily swappable wheels.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-1iiLLlKZmRg/Vo4NPsqc0nI/AAAAAAAAEC4/WRuo40U1ZsI/s1600/DSC_0906%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="http://2.bp.blogspot.com/-1iiLLlKZmRg/Vo4NPsqc0nI/AAAAAAAAEC4/WRuo40U1ZsI/s320/DSC_0906%255B1%255D.JPG" width="320" /></a></div>
<br />
<br />
A few hours later, the electronics were transplanted into the new frame to yield the final result.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-00JQoBxZlE4/Vo3Khuwk1gI/AAAAAAAAEAw/w0c9T49wgYQ/s1600/DSC_0915%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="http://1.bp.blogspot.com/-00JQoBxZlE4/Vo3Khuwk1gI/AAAAAAAAEAw/w0c9T49wgYQ/s320/DSC_0915%255B1%255D.JPG" width="320" /></a></div>
<br />
Currently the downside to printing with these composites is the inability to effectively weight budget. When I print these parts, I don't yet have a way to estimate the total mass of the parts and therefore I often overestimate to guarantee all parts comply with the weight class. This means I often have leftover weight which goes unused.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-St6sVP3koLE/Vo2wxy2cALI/AAAAAAAAEAQ/zR0f4jHgYNQ/s1600/DSC_0917%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="http://2.bp.blogspot.com/-St6sVP3koLE/Vo2wxy2cALI/AAAAAAAAEAQ/zR0f4jHgYNQ/s320/DSC_0917%255B1%255D.JPG" width="320" /></a></div>
<br />
To attempt to top off the scales before the event, I printed some press-on shaft covers to prevent vertical spinners from dinging the ends and bending the shaft. They worked about as well as you might imagine for a last minute addition (hint: total crap).<br />
<h2>
<br />MASSdestruction @ AA, Dec 5th, 2015</h2>
Thanks to Will Bales and the food I bribed him with, I was able to get a ride to the Artisan's Asylum in the wee hours of the morning. We unloaded and shared a pit table tucked behind someone's chair making bench. This time the attendees were looking pretty serious. Among them were Kyle Singer (of the Ripto robot series) who brought Dick Dastardly and Brandon Nichols who bring his multi-time champion Mondo Bizarro. Best Korea was now sporting an enormous 10" undercutting bar which out ranges pretty much every Beetle in the world. I also think the number of WPI kids in attendance doubled since last time. Absent from the fray this time was Jim Fox and his kids who usually bring Puppy, a durable and powerful wedge robot that beat DDT twice last MASS-D.<br />
<br />
Both robots did well; DDT went undefeated and took 1st in the Antweights while Silent Spring suffered only one loss in the finals and took 2nd.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-qE5fH_Z04kg/Vo2qsNxBl7I/AAAAAAAAD_4/1bhsBNTJtIs/s1600/DSC_0919%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="225" src="http://4.bp.blogspot.com/-qE5fH_Z04kg/Vo2qsNxBl7I/AAAAAAAAD_4/1bhsBNTJtIs/s400/DSC_0919%255B1%255D.JPG" width="400" /></a></div>
<br />
<h3>
Silent Spring (5-1, 2nd place)</h3>
I felt pretty good about the new frame and new components in the v1-style frame; based on its previous competitions, I expected about the same in performance and it did not disappoint. However, the flaws noted previously in the v1 style frame also manifested themselves which ultimately lead to its demise. This event demonstrated the importance of the v2 modifications in any future iterations of Silent Spring.<br />
<br />
<br />
<ul>
<li><b style="color: #6aa84f;">Win v Dick Dastardly</b></li>
<li><b style="color: #6aa84f;">Win v Best korea</b></li>
<li><b style="color: #6aa84f;">Win v Herpaderp</b></li>
<li><b style="color: #6aa84f;">Win v Dembitz</b></li>
<li><b style="color: #6aa84f;">Win v Ginger Baker</b></li>
<li><b style="color: red;">Loss v Mondo Bizarro</b></li>
</ul>
<br />
<br />
Silent Spring got off easy in many matches. In the first match against Dick Dastardly, Kyle's radio suddenly went bonkers after the first hit and he lost control of the robot; Thus losing by disqualification. Best Korea definitely boasted the superior range and even sliced a third off one of SS's tires but his reign of terror ended early when his belt came off. Herpaderp came out strong and aggressively attacked SS. Although Will was careful to not repeat his mistake from the Oct 10th event, he accidentally flipped himself by turning too sharply and was stuck in the corner. By this time, SS was limping. Both drive shafts were bent and their wheels were missing chunks. It managed to hobble around enough to beat Dembitz and Ginger Baker but was no match for the battle-ready Mondo who was likely seeking revenge for the KO at Franklin. By the end of it all, SS had some nice dings, 2 bent shafts, broken hubs, 0 wheels, and a belt blade.<br />
<br />
But seriously guys, it still works. I said RETIRE it not disable it. :/<br />
<i><br /></i>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-WolKyqwkfvM/Vo3NoJtvX7I/AAAAAAAAEBE/xEGBl-YO1iw/s1600/DSC_0923%255B1%255D.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" height="112" src="http://2.bp.blogspot.com/-WolKyqwkfvM/Vo3NoJtvX7I/AAAAAAAAEBE/xEGBl-YO1iw/s200/DSC_0923%255B1%255D.JPG" width="200" /></a></div>
<a href="http://3.bp.blogspot.com/-rg0MF-xRR6M/Vo3NvTR_u-I/AAAAAAAAEBM/mEsRzFercj4/s1600/DSC_0924%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" height="112" src="http://3.bp.blogspot.com/-rg0MF-xRR6M/Vo3NvTR_u-I/AAAAAAAAEBM/mEsRzFercj4/s200/DSC_0924%255B1%255D.JPG" width="200" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-Rgzq29aZ05Q/Vo3N45gIu3I/AAAAAAAAEBc/hSJxuwhzkF4/s1600/DSC_0926%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="112" src="http://2.bp.blogspot.com/-Rgzq29aZ05Q/Vo3N45gIu3I/AAAAAAAAEBc/hSJxuwhzkF4/s200/DSC_0926%255B1%255D.JPG" width="200" /></a></div>
<br />
<h3>
DDT (5-0, 1st place)</h3>
This time around I had the privilege of testing out DDT's frame against more spinners. Usually because of the design, DDT seldom gets hit on the frame but this time he met a horizontal spinner with a longer reach. Despite the questionable trades, DDT managed to pull out the win in each match and the win overall.<br />
<br />
<div style="text-align: left;">
</div>
<ul>
<li><b style="color: #6aa84f;">Win v Sisu</b></li>
<li><b style="color: #6aa84f;">Win v Spare Parts</b></li>
<li><b style="color: #6aa84f;">Win v Petit Gateau</b></li>
<li><b style="color: #6aa84f;">Win v Revy</b></li>
<li><b style="color: #6aa84f;">Win v Spare Parts</b></li>
</ul>
<br />
<br />
DDT's arch enemy this time around was definitely Spare Parts. In the first match I got a lucky swipe and took out a drive wheel. After that I carelessly charged into his weapon head on to "test the durability" of my front armor. This ended up being my undoing as his longer reach eventually broke through the belt guard and snapped the belt. At that point I thought I had lost but to my surprise the judges deemed his immobility more valuable than my lack of weapon. In the finals I decided to be more cautious by avoiding front hits. I knew my side armor could sustain blows and used those to take the blunt and then turn in to slice his unguarded wheels. Soon after DDT had won by KO.<br />
<i><br /></i>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-0hzD1nIFm00/Vo3OVg_dRUI/AAAAAAAAEBk/MyZez4WqJzM/s1600/DSC_0920%255B1%255D.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" height="112" src="http://2.bp.blogspot.com/-0hzD1nIFm00/Vo3OVg_dRUI/AAAAAAAAEBk/MyZez4WqJzM/s200/DSC_0920%255B1%255D.JPG" width="200" /></a></div>
<a href="http://4.bp.blogspot.com/-MSUObi7QcKA/Vo3Oa8xuthI/AAAAAAAAEBs/aKu4pdAB3MM/s1600/DSC_0921%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" height="112" src="http://4.bp.blogspot.com/-MSUObi7QcKA/Vo3Oa8xuthI/AAAAAAAAEBs/aKu4pdAB3MM/s200/DSC_0921%255B1%255D.JPG" width="200" /></a><br />
<br />
<h2>
Concluding Thoughts</h2>
Even without the v2 upgrades, the CF/Nylon printed v1 frame proved more than sufficient to withstand the big hits from some of the best Beetleweights in the North East. In addition, Silent Spring's performance showed how effective the SimonK firmware ESCs can be in weapon spinup; You'd better believe I'll be trying my hardest to get the Spider ZTW ESC into the v2 design as it may be my new favorite ESC over the Turnigy Plush.<br />
<br />
The next MASSdestruction is coming soon on Jan 23. This time it will be hosted by WPI and its unknown as to whether I'll bring new robots or any robots at all. Stay tuned for more. Bot on!<br />
<br />
<br />
<br />
<br />Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com10tag:blogger.com,1999:blog-1588984194759318117.post-80123142754929525712015-10-29T01:14:00.001-04:002016-01-07T02:37:22.968-05:00NERC Franklin Institute 2015Saturday, October 24th, we left in the dead of midnight to make the ~5 hour drive to Philadelphia for the NERC Franklin Institute robotic combat event. Although the competition supports up to 30 pound robots, I brought only DDT and Silent Spring because robots larger than 3 pounds were prohibited from using LiPoly battery chemistry. Even still, some of the best insect-class robots in the northeast were scheduled to attend and I predicted this would be the real test before Motorama in the mid-winter 2016.<br />
<br />
Since MASSdestruction two weeks ago, the robots received minor upgrades. DDT at minimum received a replacement motor can and pulley since the last one was actually bent from years of abuse. DDT was also set to receive a new frame printed with carbon fiber instead of kevlar as the tension member because it was noted that the weapon shaft bore began to open up from all the spinner-spinner hits.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjXguL7zu9_EygpeW-BxEWe7qSa0cSZmYJQ8H8GifCaMC3QWuUf9u6HB_W5zfyCWe5TCBfOE0gXpj5cC6yXvco3o0efOZh8Mfklj-AWvEF9FB9jdLQPNJB6N_KrjvFtmdEh-tHFGYP8h8w/s1600/DSC_0770.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjXguL7zu9_EygpeW-BxEWe7qSa0cSZmYJQ8H8GifCaMC3QWuUf9u6HB_W5zfyCWe5TCBfOE0gXpj5cC6yXvco3o0efOZh8Mfklj-AWvEF9FB9jdLQPNJB6N_KrjvFtmdEh-tHFGYP8h8w/s320/DSC_0770.JPG" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-pwaRHgiOdEc/Vi8fpwilg4I/AAAAAAAAD6s/QLr01tXYEhk/s1600/DSC_0771.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="http://1.bp.blogspot.com/-pwaRHgiOdEc/Vi8fpwilg4I/AAAAAAAAD6s/QLr01tXYEhk/s320/DSC_0771.JPG" width="320" /></a></div>
<br />
<br />
Unfortunately, the prints failed due to some trickiness in the CF thread and I whipped up a quick solution using two belleville washers on either side of the frame to distribute loads more effectively. Silent Spring felt the success of the upgraded drivetrain but suffered some difficulties in the tournament due to the scarcity of the choice motors. Now Silent Spring will run a OEM option, the Pololu 9.7:1 HP gearmotors. The leftover weight was spent to upgrade the disk. Thin sections that bent at MASS-D were beefed up which brought the disk weight up by 4 oz to about 16 oz.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-Wy-pKlsXvV0/Vi8fvbog2DI/AAAAAAAAD64/2IWcE9HeGak/s1600/DSC_0766.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="http://3.bp.blogspot.com/-Wy-pKlsXvV0/Vi8fvbog2DI/AAAAAAAAD64/2IWcE9HeGak/s320/DSC_0766.JPG" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-l7QOSTRDk1E/Vi8fvZqWc1I/AAAAAAAAD68/4lOQ1kj15uo/s1600/DSC_0772.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="http://3.bp.blogspot.com/-l7QOSTRDk1E/Vi8fvZqWc1I/AAAAAAAAD68/4lOQ1kj15uo/s320/DSC_0772.JPG" width="320" /></a></div>
<br />
<br />
For an added bit of fun, I decided to use some voodoo magic from the robot gods in this new disk. We were clearing out the crate where Overhaul lives and I decided to pull out the AR400 plates we salvaged at BattleBots off Witch Doctor. While one plate was pretty well bent by Nightmare, the other was relatively flat which made it a fine candidate for a blade. I never did get that green color palette from Mike so I ran it in AR plate's natural color: rust.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-_tq0V8m96kY/Vi8f74Op7wI/AAAAAAAAD7I/9Xlvb0W_HLI/s1600/DSC_0779.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="http://3.bp.blogspot.com/-_tq0V8m96kY/Vi8f74Op7wI/AAAAAAAAD7I/9Xlvb0W_HLI/s320/DSC_0779.JPG" width="320" /></a></div>
<br />
<br />
At 7:45 am we arrived in the museum and grabbed whatever tables were left. The arena was HUGE and pretty awesome in construction. Double doors for entry and exit, a nice kick plate, and great visibility all around. It left me wishing I brought the 12 and 30.<br />
<br />
This time around, DDT drew only direct-drive brushless drums. The release of the new Kitbots "Saifu" kit was probably a large factor in that. This turns out to be advantageous to DDT because the drum standoffs pose a big weakness generally to undercutter weapons. As long as DDT can stay clear of direct hits from the drum, the match should go in his favor over several small hits as the standoffs wear away. As a result, DDT went 4-0 for 1st place in the Antweight division<br />
<br />
<b>W vs Saifu</b><br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/n3Bv9IBdmeE" width="560"></iframe>
<br />
<b><br /></b>
<b>W vs Poco Tambor</b><br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/q3GHi46jGA8?rel=0" width="560"></iframe>
<b><br /></b>
<b><br /></b>
<b>W vs Revy</b><br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/VMUGwPuYnbI?rel=0" width="560"></iframe>
<b><br /></b>
<b><br /></b>
<b>W vs Revy (finals)</b><br />
<br />
I was feeling pretty good about Silent Spring's destructive capability after MASSdestruction but utilization of that power ended up being its undoing. The unevenness of the floor and massive gyroscopic forces at high speeds meant that stability was low and its first two opponents took full advantage of that. Luckily, enough, Silent Spring was able to survive those outcomes and climb its way through the bracket. Silent Spring clawed its way through the loser's bracket to find 2nd place in a 5-2 record, losing in the finals to Speed Wedge 3, an extremely robust opponent.<br />
<br />
<b>W vs Mondo Bizzaro</b><br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/s2QGSprv9mM?rel=0" width="560"></iframe>
<b><br /></b>
<b><br /></b>
<b>L vs Project Darkness</b><br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/P75gMXMDSZI?rel=0" width="560"></iframe>
<b><br /></b>
<b><br /></b>
<b>W vs Best Korea</b><br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/KjhMa8B1S9c" width="560"></iframe>
<b><br /></b>
<b><br /></b>
<b>W vs Grande Tambor</b><br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/amrzny1M3yU?rel=0" width="560"></iframe>
<b><br /></b>
<b><br /></b>
<b>W vs Trilobite</b><br />
<b>W vs Project Darkness</b><br />
<b>L vs Speed Wedge 3 (finals)</b><br />
<b><br /></b>
Silent Spring definitely managed to bring the pain just as he had at MASSdestruction. Below are some pictures of opponents after matches.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiRmpdAnBeRzlYSaw4uXfgxeOW-PXKHmjbPwALH3C36L6QxlSXKmjhOWkRP-QcjHrzQ4GYG2K10cWl83DySMbfqVT9DyDo4wVFk3jzz-I7qdcA6cdRyQdU7eqSCFgdLulgVRebIQK8GndI/s1600/DSC_0796.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" height="112" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiRmpdAnBeRzlYSaw4uXfgxeOW-PXKHmjbPwALH3C36L6QxlSXKmjhOWkRP-QcjHrzQ4GYG2K10cWl83DySMbfqVT9DyDo4wVFk3jzz-I7qdcA6cdRyQdU7eqSCFgdLulgVRebIQK8GndI/s200/DSC_0796.JPG" width="200" /></a></div>
<a href="http://4.bp.blogspot.com/-mHHr-szUmPU/VjGsuaUEQZI/AAAAAAAAD7g/FJ0Qd0SxfZY/s1600/DSC_0797.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" height="112" src="http://4.bp.blogspot.com/-mHHr-szUmPU/VjGsuaUEQZI/AAAAAAAAD7g/FJ0Qd0SxfZY/s200/DSC_0797.JPG" width="200" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-cDBMP5Q1rg8/VjGsufHXXWI/AAAAAAAAD7k/0RUgScKmQbA/s1600/DSC_0798.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" height="112" src="http://3.bp.blogspot.com/-cDBMP5Q1rg8/VjGsufHXXWI/AAAAAAAAD7k/0RUgScKmQbA/s200/DSC_0798.JPG" width="200" /></a></div>
<a href="http://2.bp.blogspot.com/-JhVJutx2lzA/VjGsvNT9jzI/AAAAAAAAD7w/RGBTOIONxkg/s1600/DSC_0800.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" height="112" src="http://2.bp.blogspot.com/-JhVJutx2lzA/VjGsvNT9jzI/AAAAAAAAD7w/RGBTOIONxkg/s200/DSC_0800.JPG" width="200" /></a><br />
<br />
However, the robots didnt escape unscathed either. DDT lost a rear corner screw when Saifu clipped the edge during a gyro dance but otherwise remained unchanged.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-QH6MqMzcxxQ/VjL4QWa2LQI/AAAAAAAAD8Q/f-eo61jJPss/s1600/DSC_0806.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="http://4.bp.blogspot.com/-QH6MqMzcxxQ/VjL4QWa2LQI/AAAAAAAAD8Q/f-eo61jJPss/s320/DSC_0806.JPG" width="320" /></a></div>
<br />
Silent Spring suffered a fair amount of injuries from the first two matches and managed to keep it together for the rest of the tournament. In its first match vs Mondo Bizzaro, SS took a blow to the wheel axle which bent the shaft (and made the disk angle weird) but also seems to have seized up a motor. This caused one of the Vextrollers to fail and I ultimately had to use a postponement to replace the drive electronics. But it was the bent axle that proved to be the biggest issue going into the second match vs Project Darkness. Because it was slightly bent, the disk was no longer planar and so I could not spin up without tilting. Ian is an expert driver (in fact he won best driver award!) and took full advantage of this; he drove around SS while it was uncontrollable and delivered some nice hits deep in the UHMW back and got some nice shots on the drive pulleys which ironically bent the OTHER side's drive shaft. One of these hits actually snapped the wheel hub but somehow continued to drive just fine. I dont remember exactly how the match played out, but in the end PD was the victor and SS had to climb through the losers bracket for a second shot. When I was servicing both bent axles I managed to find a sweet spot where the blade was once again flat. Pretty much "OMG DONT TOUCH IT EVER". In its battered state, it was able to deliver the big hits and crawl back up to the finals without accumulating extra damage.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-zzu0fPL8Ag8/VjMKfxtQVhI/AAAAAAAAD8g/9hS5uqUgBnI/s1600/DSC_0805%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="http://4.bp.blogspot.com/-zzu0fPL8Ag8/VjMKfxtQVhI/AAAAAAAAD8g/9hS5uqUgBnI/s320/DSC_0805%255B1%255D.JPG" width="320" /></a></div>
<br />
<br />
DDT can continue to compete as is but Silent Spring needs significant repairs to bring it back to a reliable state. Since it keeps doing so well, I must once again delay its retirement even though I want to build something else. I'll assess the extent of upgrades to be received in time for the next competition, MASSdestruction, in December. See you all there!Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com15tag:blogger.com,1999:blog-1588984194759318117.post-32601488041081534262015-10-26T23:25:00.004-04:002016-01-07T02:37:01.629-05:00MASSdestruction at the Artisan's Asylum (Oct 10)Not too long after the Dragon Con bouts, the crew went right next door to the Artisan's Asylum in Somerville, MA to fight at the first ever MASSdestruction event. As the date came closer, more and more robots registered which helped fund the brand new arena that Rob Masek put together. It was shaping up to be a world-class event.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-SwaH8Ygg2Uc/ViXmedp7pSI/AAAAAAAAD5M/xDBxLtohDlk/s1600/12027588_1072354576121703_5273466412893788487_n.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="320" src="http://1.bp.blogspot.com/-SwaH8Ygg2Uc/ViXmedp7pSI/AAAAAAAAD5M/xDBxLtohDlk/s320/12027588_1072354576121703_5273466412893788487_n.jpg" width="320" /></a></div>
<br />
<br />
I brought DDT and Silent Spring with me; neither bot had major upgrades since Dragon Con. Silent Spring received an updated drive train which in turn required re-fabrication of a few critical components. I decided to dump the 33:1 Spark gearmotors in favor of my KW hackmotor which are the drive units I used in Dominant Mode. You may recall, they consist of the KW beetle motors (which are now discontinued) mated to a ~10:1 spur gearbox from the "1000 RPM" gearmotors. Not only is this combination lighter, but it is also faster and more powerful (1500 RPM @ 12V). This change gave Silent Spring the agility it desperately needed to be competitive and deliver the big hit. These tests on an empty Stratasys material cartridge are evidence of its new destructive power.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-PYtM6oV-W8k/Vi7uDJFxQwI/AAAAAAAAD5o/YJz6Z-ZsCzw/s1600/DSC_0749.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="112" src="http://3.bp.blogspot.com/-PYtM6oV-W8k/Vi7uDJFxQwI/AAAAAAAAD5o/YJz6Z-ZsCzw/s200/DSC_0749.JPG" width="200" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-3JNOgw_I-uE/Vi7uC-sne2I/AAAAAAAAD5g/z5srm8UFTHk/s1600/DSC_0750.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="112" src="http://4.bp.blogspot.com/-3JNOgw_I-uE/Vi7uC-sne2I/AAAAAAAAD5g/z5srm8UFTHk/s200/DSC_0750.JPG" width="200" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-G3efJg1SP_s/Vi7uDNF_iUI/AAAAAAAAD5k/mIUc1ScyLNw/s1600/DSC_0752.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="112" src="http://4.bp.blogspot.com/-G3efJg1SP_s/Vi7uDNF_iUI/AAAAAAAAD5k/mIUc1ScyLNw/s200/DSC_0752.JPG" width="200" /></a></div>
<pictures></pictures><br />
<br />
Saturday morning, Lucy and I hitched a ride with Will and Max Bales who brought a few robots of their own. These included the last minute Hyperderp, lovingly named Turd Ferguson, and Hypershock as seen on TV. All our bots combined, we had 10 ants and 11 beetles. To keep matches rolling consistently throughout the day, Rob proposed a modified swiss tournament structure. All robots will have ~4 matches and points will be awarded for the conditions of the match.<br />
<br />
<ul>
<li>A win is 4 points</li>
<li>A win by default (no-shows or forfeits before the fight) is 3 points</li>
<li>A loss is 2 points</li>
<li>A double loss (where both robots stop functioning) is 1 points</li>
<li>A no-show is 0 points</li>
</ul>
<br />
The top four robots in each weight class are then pitted in a semi-finals double elimination scenario to fight for 1st, 2nd, and 3rd.<br />
<br />
In the end, DDT had 6 matches and went 4-2 for 3rd place. Silent Spring (in a weird turn of events) had 5 matches and went 4-1 for 1st place. <a href="https://docs.google.com/document/d/1YRlJFKPGGQum6RarJToC_44SrzMgKZOgbF6D1DFrTaU/edit">The tournament results are hyperlinked here</a>. Only a few matches have video from what I can tell. I will update this page periodically with embedded video as more pop up.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-tF95Ko-llMM/Vi7uV4c0zsI/AAAAAAAAD54/osLTTvqaCGk/s1600/DSC_0755.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"></a><a href="http://3.bp.blogspot.com/-x8zrCUC6Qq0/Vi7uV8MLkvI/AAAAAAAAD58/8Np7DRES8GI/s1600/DSC_0756.JPG" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" height="112" src="http://3.bp.blogspot.com/-x8zrCUC6Qq0/Vi7uV8MLkvI/AAAAAAAAD58/8Np7DRES8GI/s200/DSC_0756.JPG" width="200" /></a><img border="0" height="112" src="http://2.bp.blogspot.com/-tF95Ko-llMM/Vi7uV4c0zsI/AAAAAAAAD54/osLTTvqaCGk/s200/DSC_0755.JPG" width="200" /></div>
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-bIQelBrXOVU/Vi7uV6lTg1I/AAAAAAAAD6A/kyY_byVJ7vk/s1600/DSC_0757.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"></a><a href="http://4.bp.blogspot.com/-UozI2EZoETg/Vi7ucbTSy_I/AAAAAAAAD6Q/MkcQuk1kJRc/s1600/DSC_0759.JPG" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" height="112" src="http://4.bp.blogspot.com/-UozI2EZoETg/Vi7ucbTSy_I/AAAAAAAAD6Q/MkcQuk1kJRc/s200/DSC_0759.JPG" width="200" /></a><img border="0" height="112" src="http://2.bp.blogspot.com/-bIQelBrXOVU/Vi7uV6lTg1I/AAAAAAAAD6A/kyY_byVJ7vk/s200/DSC_0757.JPG" width="200" /></div>
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Overall, I am satisfied with the performance of the robots. DDT performed well (never stopped!) but was shown some glaring weaknesses to particular wedge designs. In the future, I'll need to practice driving and prepare special blades to handle these types of wedges. Silent Spring STILL suffers from random shutoffs which is incredibly infuriating but before it fails it delivers some of the most impressive blows I've ever seen in a beetle.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-KHASXTXfYUs/Vi7utUiPkqI/AAAAAAAAD6Y/U3V6fXnGYlg/s1600/DSC_0758.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="320" src="http://2.bp.blogspot.com/-KHASXTXfYUs/Vi7utUiPkqI/AAAAAAAAD6Y/U3V6fXnGYlg/s320/DSC_0758.JPG" width="180" /></a></div>
<br />
<br />
Before Franklin Institute, I'll be looking to redo the wiring and improve its overall reliability. One area that needs improvement is the blade durability; in this event I managed to bend both blades I had for Silent Spring not out of plane (say from a vertical spinner) but IN PLANE. This means its own hits are so hard it damages the disk. I would pay $$$ to see some high-speed video of the blade warping under impact! Stay tuned for 10/24 to see how these two bots shake it up at Franklin!<br />
<br />
<br />Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com10tag:blogger.com,1999:blog-1588984194759318117.post-32915810953443064672015-09-09T22:27:00.002-04:002015-09-09T22:30:20.480-04:00DDTv3: The 3D Printed Nylon-Kevlar Combat Robot<h3>
End of V2</h3>
I didnt have a chance to write up the Bot Blast 2015 event report earlier this year July, but if I did I wouldnt actually have much to say. Neither DDT or Silent Spring did very well and amounted for a total W-L of 2-4. Furthermore, DDT's frame was done for and I saw this opportunity to revisit some of the design creeds that I'd been touting for for the past year such as the "big weapon entertainment" and "indirect drive". These concepts are good for entertainment value and long-term reliability but are not necessarily the key to win fights. With a bit of TV appearance, I had a target on my back and many builders would love a chance to prove themselves against one of the "cream of the crop" robot builders as described by the Battlebots founders. I dont mind this one bit, but if this is the case I better live up to the hype. And so starting with DDT, I will evolve each robot in my fleet.<br />
<br />
<h3>
A New Design</h3>
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-7PrnmJifwXc/VfDWQm36FOI/AAAAAAAADo0/8ZkJHlkia68/s1600/DDTu%2Bv02.2%2Badad.PNG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="280" src="http://2.bp.blogspot.com/-7PrnmJifwXc/VfDWQm36FOI/AAAAAAAADo0/8ZkJHlkia68/s320/DDTu%2Bv02.2%2Badad.PNG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">DDT v3 Isometric View</td></tr>
</tbody></table>
<br />
Recently, Charles purchased a Mark One 3D printer from the company Mark Forged. This printer is unique because it has the ability to embed CONTINUOUS strands of fiber (fiberglass, kevlar, carbon fiber) within each layer of its print. Although it cannot place fiber in the vertical build axis, this is a monumental improvement in tensile strength. In addition, it prints nylon as its base material, which is mechanically superior to ABS in our application. To further demonstrate the capabilities and applications of their technology, I have elected to print DDT as a nylon-kevlar unibody.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-bI-sk7CKnEc/VfDUQPgTRSI/AAAAAAAADoY/sAoYma5xRco/s1600/uni%2Bframe%2Bv2.2%2B1.PNG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="280" src="http://1.bp.blogspot.com/-bI-sk7CKnEc/VfDUQPgTRSI/AAAAAAAADoY/sAoYma5xRco/s320/uni%2Bframe%2Bv2.2%2B1.PNG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">DDT v3 Unibody CAD</td></tr>
</tbody></table>
<br />
Designing for a unibody frame is a bit challenging because many details about the parts, their connections, and their assembly order must be known ahead of time. CAD became an invaluable tool in this process; each part was modeled with excruciating detail and a detailed assembly order was developed for the rear component bay. I fully realize that this design is not optimal for 3D printing and perhaps I can explain in another post if people are interested. The reasoning for the design of the trusses were add-ons to stiffen long or thin features. A better design would have made the robot more blocky but would have been aesthetically boring in my opinion.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-GbQ5TY2PHjE/VfDVoUZakYI/AAAAAAAADok/vaAs8mDHAWM/s1600/DDTu%2Bv02.2%2B5.PNG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="192" src="http://1.bp.blogspot.com/-GbQ5TY2PHjE/VfDVoUZakYI/AAAAAAAADok/vaAs8mDHAWM/s400/DDTu%2Bv02.2%2B5.PNG" width="400" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">DDT v3 Internal View</td></tr>
</tbody></table>
<br />
DDT kept its unique shape and trademark "huge-ass blade" but with a few modifications. First, the blade size was reduced to 6" (instead of 6.5"). This decision was made to free up some weight to be allocated elsewhere, specifically the ribbing to the blades. I had two blades made for DDT v2 and both of them were horribly bent after the year or so they have been in service. The newer blade design beefed up the sections by about 1.5x and were still lighter than the old blades.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://3.bp.blogspot.com/-Py6ka0uOJio/VfDWz5S3I_I/AAAAAAAADpE/c7Ma-SL40a0/s1600/DSC_0564_1.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="180" src="http://3.bp.blogspot.com/-Py6ka0uOJio/VfDWz5S3I_I/AAAAAAAADpE/c7Ma-SL40a0/s320/DSC_0564_1.JPG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">The new blade stacked atop the old blade demonstrates their difference in diameter</td></tr>
</tbody></table>
<br />
Second, more armor was added to the body. This decision was made after the number of hits to the pulleys and wheels. The frame parts would be thickened overall and side armor will be included. Third, the indirect drive was ditched in favor of direct drive to 22:1 silver sparks with cushy foam wheels. The small brass micro gearmotors proved to be unreliable and the ratios I was using were far to mild to be maneuverable. The original DDT used roughly 20:1 gearboxes and had superior mobility. Finally, the blade material was changed. This time I wanted to use prehard materials because my attempts to harden were subpar. The standard 6" blades were waterjet from 60C hard 1075/74 spring steel. An alternate set of blades were made for specific types of opponents. These were also made from different materials and had different geometries.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/-xReY4kZW0cI/VfDWqhC7yeI/AAAAAAAADo8/GX-JCiCZ9SU/s1600/DSC_0651.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="180" src="http://4.bp.blogspot.com/-xReY4kZW0cI/VfDWqhC7yeI/AAAAAAAADo8/GX-JCiCZ9SU/s320/DSC_0651.JPG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Standard Blade (left) and Bash Blade (right)</td></tr>
</tbody></table>
<br />
<h3>
Fabrication</h3>
The frame took nearly 36 hours to print! The printer is currently admittedly slow, especially with the addition of fiber. While the frame could certainly have used more fiber, I decided to optimize for more "height" of fiber than depth and so all layers had fiber but only select layers had full layers.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://3.bp.blogspot.com/-O1Mr8wgLW-k/VfDe0gbo_8I/AAAAAAAADpU/IM5BQATHC3s/s1600/DDTeiger.PNG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="224" src="http://3.bp.blogspot.com/-O1Mr8wgLW-k/VfDe0gbo_8I/AAAAAAAADpU/IM5BQATHC3s/s320/DDTeiger.PNG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">DDT v3 unibody frame as seen in "eiger"</td></tr>
</tbody></table>
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-3zrvdrS6b5I/VfDfJYdisyI/AAAAAAAADpc/szEvabM7taQ/s1600/DSC_0564.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="180" src="http://2.bp.blogspot.com/-3zrvdrS6b5I/VfDfJYdisyI/AAAAAAAADpc/szEvabM7taQ/s320/DSC_0564.JPG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">DDT v3 unibody frame as printed on the Markforged Mark One Printer</td></tr>
</tbody></table>
<br />
The frame needed some cleaning to allow the proper fit of parts. Any undercut features were finished with a rotary tool sanding bit to clean up areas were support structures were placed. This was critical for the drive motors, screw holes, and other components to be placed.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-wGylIObXArw/VfDfufDdMgI/AAAAAAAADpo/qWUASpnsm58/s1600/DSC_0570.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="180" src="http://2.bp.blogspot.com/-wGylIObXArw/VfDfufDdMgI/AAAAAAAADpo/qWUASpnsm58/s320/DSC_0570.JPG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Fingertech Spark gearmotor embedded into the frame</td></tr>
</tbody></table>
<br />
The critical electronics were packaged into a small cube that I designed using my expert level tetris skills. This small cube contains an Orange RX receiver, a Turnigy Plush 10 ESC for the weapon, and two Vex 29 motor controllers for each spark motor.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/--8m59WrvuJE/VfDgCZdyoSI/AAAAAAAADpw/p7oNtn6bYSc/s1600/DSC_0634.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="180" src="http://4.bp.blogspot.com/--8m59WrvuJE/VfDgCZdyoSI/AAAAAAAADpw/p7oNtn6bYSc/s320/DSC_0634.JPG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">DDT v3 electronics cube contains three ESCs and a receiver and is about 1" x 1.125" x .75"</td></tr>
</tbody></table>
<br />
The electronics cube is intended to fit in the frame like so.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-FLTPtMNwqPQ/VfDhADPgCyI/AAAAAAAADp8/Gh5FnGxIHMk/s1600/DSC_0636.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="180" src="http://2.bp.blogspot.com/-FLTPtMNwqPQ/VfDhADPgCyI/AAAAAAAADp8/Gh5FnGxIHMk/s320/DSC_0636.JPG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Placement of the electronics cube within the frame</td></tr>
</tbody></table>
<br />
The motor was recycled from v2 and the robot was wired. No dedicated power switch was used since I have had bad luck with the Fingertech switches lately and was feeling skeptical; in lieu of this, I elected to use a direct connection to the battery.<br />
<br />
The blade and pulley interface were modified as well. Instead of placing the bearing directly within the bore of the blade as done previously, both bearings would be placed in the hub and the blade would be bolted to the pulley. A round feature on the pulley would mate the blade concentrically with the pulley. This method is better because it allows the blades to be swapped without disassembling the entire shaft assembly, it reduces misalignment because the skew is no longer dependent on the alignment of the blade and pulley, and it reduces the shock of the bearings by placing a softer medium between the bearing OD and the blade.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-Nk0GyNy0bPI/VfDiyhwk9MI/AAAAAAAADqI/yQpW1AfrYlo/s1600/under%2Bblade.PNG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="320" src="http://1.bp.blogspot.com/-Nk0GyNy0bPI/VfDiyhwk9MI/AAAAAAAADqI/yQpW1AfrYlo/s320/under%2Bblade.PNG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Illustration of the blade-pulley interface</td></tr>
</tbody></table>
<br />
Lastly, side armor was made to fit wrap around the sides. These were cut from 0.0625 polycarbonate which is tough yet flexible. However at this short length and thickness the sides were difficult to put on and heavily preloaded. I do not have especially high hopes for these; in anticipation, I made several copies.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-pQlrwb3xVqw/VfDjENVRlbI/AAAAAAAADqQ/b-BnGMyp_N0/s1600/DSC_0662.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="180" src="http://2.bp.blogspot.com/-pQlrwb3xVqw/VfDjENVRlbI/AAAAAAAADqQ/b-BnGMyp_N0/s320/DSC_0662.JPG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">DDT v3 with an older 4130 Blade</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/-IoJjAetZPak/VfDjEKPLxRI/AAAAAAAADqU/28c3VmhBd9E/s1600/DSC_0671.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="180" src="http://4.bp.blogspot.com/-IoJjAetZPak/VfDjEKPLxRI/AAAAAAAADqU/28c3VmhBd9E/s320/DSC_0671.JPG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">DDT v3 featuring the newer 1074/75 blade</td></tr>
</tbody></table>
<br />
Final weight was 15.5 oz! A very comfortable weight and some wiggle room to improve.<br />
<br />
<h3>
Preliminary performance</h3>
DDT had the opportunity to smash a number of items. However none of them actually weighed a pound. Still, these tests demonstrated remarkable damage to UHMW, aluminum, and even other 3D printed Nylon parts. I couldnt think of a better way to send off the v2 frame permanently!<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-IdzLDOPPQcg/VfDrEeZLSuI/AAAAAAAADsA/RZZ4seY5enY/s1600/DSC_0723.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" height="112" src="http://4.bp.blogspot.com/-IdzLDOPPQcg/VfDrEeZLSuI/AAAAAAAADsA/RZZ4seY5enY/s200/DSC_0723.JPG" width="200" /></a></div>
<a href="http://4.bp.blogspot.com/-2orGLKz0AxY/VfDrEQjIrxI/AAAAAAAADsE/YytCpbsNbn8/s1600/DSC_0724.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" height="112" src="http://4.bp.blogspot.com/-2orGLKz0AxY/VfDrEQjIrxI/AAAAAAAADsE/YytCpbsNbn8/s200/DSC_0724.JPG" width="200" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-kVR_LyXA-kg/VfDrEQVbAvI/AAAAAAAADr8/cWdJKVe7cRw/s1600/DSC_0725.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" height="112" src="http://4.bp.blogspot.com/-kVR_LyXA-kg/VfDrEQVbAvI/AAAAAAAADr8/cWdJKVe7cRw/s200/DSC_0725.JPG" width="200" /></a></div>
<a href="http://3.bp.blogspot.com/-h0-A9rpbMOw/VfDrE2Xl2-I/AAAAAAAADsM/Ojn9_BtDkvc/s1600/DSC_0726.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" height="112" src="http://3.bp.blogspot.com/-h0-A9rpbMOw/VfDrE2Xl2-I/AAAAAAAADsM/Ojn9_BtDkvc/s200/DSC_0726.JPG" width="200" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-n1W_xghbGrw/VfDrFDdPZrI/AAAAAAAADsI/5HGRvWokslA/s1600/DSC_0727.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" height="112" src="http://2.bp.blogspot.com/-n1W_xghbGrw/VfDrFDdPZrI/AAAAAAAADsI/5HGRvWokslA/s200/DSC_0727.JPG" width="200" /></a></div>
<a href="http://4.bp.blogspot.com/-M1NENrs60_U/VfDrGfzhb2I/AAAAAAAADsU/FKNdweIi5Lc/s1600/DSC_0728.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" height="112" src="http://4.bp.blogspot.com/-M1NENrs60_U/VfDrGfzhb2I/AAAAAAAADsU/FKNdweIi5Lc/s200/DSC_0728.JPG" width="200" /></a><br />
<br />
<h3 style="clear: both; text-align: left;">
Dragon Con 2015 Microbattles</h3>
<div class="separator" style="clear: both; text-align: left;">
DDT v3's debut was at Dragon Con 2015 where it had four matches and went 3 wins, 1 loss. I am extremely happy with its performance and the resiliance of the printed frame. I half expected the weapon shaft bore to open up after so many hits (including arena wall hits) but it remains as true as when it was first made, probably due in part to the heavy kevlar fill around the critical dimensions. DDT's fights are embedded below. I was very lucky to not fly out of the pit on several occasions but unfortunately my luck ran out when a solid hit on Algos sent DDT flying into the pit.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/kwRgZmDcLt8?rel=0" width="560"></iframe>
<br />
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/QaS_ogiAVZE?rel=0" width="560"></iframe>
<br />
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/KkCXLQ5I15w?rel=0" width="560"></iframe>
<br />
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/zJ7sOwuKxvA?rel=0" width="560"></iframe>
<br />
<div class="separator" style="clear: both; text-align: left;">
DDT took some damage from Green Reaper when he climbed over the blade and began chewing on the frame. I was surprised to see that not much damage was done but only because my blade was keeping him from pushing into the frame otherwise more damage would surely have been done; some of the fiber is exposed which means he got about 0.6 mm deep. Both of the wheel guards exploded against Algos but I was able to leave a nice mark in his 0.0625 thick Ti before flying out.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: left; margin-right: 1em; text-align: left;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/-aFRJxuPomzY/VfDp7y3HWHI/AAAAAAAADrc/A48mGagQghs/s1600/DSC_0706.JPG" imageanchor="1" style="clear: left; margin-bottom: 1em; margin-left: auto; margin-right: auto;"><img border="0" height="112" src="http://4.bp.blogspot.com/-aFRJxuPomzY/VfDp7y3HWHI/AAAAAAAADrc/A48mGagQghs/s200/DSC_0706.JPG" width="200" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Post-Algos picture</td></tr>
</tbody></table>
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://3.bp.blogspot.com/-L9etKGyomqQ/VfDp7z9YjPI/AAAAAAAADrY/hWp892y1z2M/s1600/DSC_0709.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto; text-align: center;"><img border="0" height="112" src="http://3.bp.blogspot.com/-L9etKGyomqQ/VfDp7z9YjPI/AAAAAAAADrY/hWp892y1z2M/s200/DSC_0709.JPG" width="200" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Green Reaper damage</td></tr>
</tbody></table>
<br />
<br />
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: left; margin-right: 1em; text-align: left;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-Yt2M-cbtKvU/VfDp783T2NI/AAAAAAAADrg/kJuSmKJEQmU/s1600/DSC_0711.JPG" imageanchor="1" style="clear: left; margin-bottom: 1em; margin-left: auto; margin-right: auto;"><img border="0" height="112" src="http://2.bp.blogspot.com/-Yt2M-cbtKvU/VfDp783T2NI/AAAAAAAADrg/kJuSmKJEQmU/s200/DSC_0711.JPG" width="200" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Damage to Algos</td></tr>
</tbody></table>
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-5hIBRRRZpUM/VfDp8seFJuI/AAAAAAAADro/AqYUbCpZnjY/s1600/DSC_0712.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto; text-align: center;"><img border="0" height="112" src="http://1.bp.blogspot.com/-5hIBRRRZpUM/VfDp8seFJuI/AAAAAAAADro/AqYUbCpZnjY/s200/DSC_0712.JPG" width="200" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Bent Ti side on Algos</td></tr>
</tbody></table>
<br />
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
I want to find more opportunities for DDT to challenge other antweights. There are two competitions nearing in October; I will try my hardest to bring DDT there. Stay tuned!</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com4tag:blogger.com,1999:blog-1588984194759318117.post-30568962999625694742015-06-19T03:06:00.001-04:002015-06-21T00:26:05.605-04:00Robot Power Vyper ESC CAD AvailableAfter coming back from <a href="http://battlebots.com/">Battlebots 2015</a>, I am DEFINITELY feeling the big bot bug. I began playing with some concepts for robots but, as you know my design style, noticed a 3D model for the <a href="http://www.robotpower.com/products/vyper_info.html">Robot Power Vyper ESC</a> did not exist. So I made one off the physical item courtesy of Charles Guan and make it available here.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-q42z58ac1BA/VYO-cm2M6EI/AAAAAAAADV8/lAUkm1KLlFc/s1600/RP%2BVyper%2BESC.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="212" src="http://3.bp.blogspot.com/-q42z58ac1BA/VYO-cm2M6EI/AAAAAAAADV8/lAUkm1KLlFc/s400/RP%2BVyper%2BESC.PNG" width="400" /></a></div>
<br />
<br />
So here it is. The actual dimensions ARE larger than the advertised size online. My guess is the fan on top adds some height. I may have added a shameless plug on the bottom side, hehe (feel free to remove it). Charles has more details on the internals. Here is a 3D printed version of the STL model. Not too bad?<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-eGc_JR62vHc/VYY82Mr9IdI/AAAAAAAADWY/LYCeYfUSljY/s1600/DSC_0438%255B1%255D.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="http://4.bp.blogspot.com/-eGc_JR62vHc/VYY82Mr9IdI/AAAAAAAADWY/LYCeYfUSljY/s320/DSC_0438%255B1%255D.JPG" width="320" /></a></div>
<br />
<br />
The model can be downloaded as an:<br />
<br />
<ul>
<li><a href="https://www.dropbox.com/s/g2yu76qhg63e6t8/RP%20Vyper%20ESC.STL?dl=0">STL</a></li>
<li><a href="https://www.dropbox.com/s/e768qdvk2hko239/RP%20Vyper%20ESC.x_t?dl=0">Parasolid</a></li>
<li><a href="https://www.dropbox.com/s/ti7bvuvtg73bvbq/RP%20Vyper%20ESC.SLDPRT?dl=0">SolidWorks 2014</a></li>
</ul>
<div>
Parasolid TBH is probably the easiest, but choose your own medicine. Warning, no weight has been input yet!</div>
<div>
<br /></div>
<div>
Cheers!</div>
<div>
-Jamo</div>
Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com2tag:blogger.com,1999:blog-1588984194759318117.post-16890878513416401132015-03-01T00:04:00.000-05:002015-08-03T17:41:01.340-04:00Return the Victorious: Motorama 2015 Event ReportMotorama may very well be the toughest combat robotics competition in the entire Northeast. With that said, it is very difficult to place in any weight class. By chance and skill, I was able to place in two weight classes of three entrants! G3 Robotics was able to end with a respectable 10 wins and 4 losses. See the bot specific breakdown.<br />
<div>
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
</div>
<div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-xzzvMSPzLxA/VPIlTM3mzYI/AAAAAAAADHU/VX_mXcpp-7w/s1600/20150219_195759.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://4.bp.blogspot.com/-xzzvMSPzLxA/VPIlTM3mzYI/AAAAAAAADHU/VX_mXcpp-7w/s1600/20150219_195759.jpg" width="400" /></a></div>
<br /></div>
<div>
<br /></div>
<div>
<b>________________________________________________</b></div>
<div>
<b>Silent Spring</b></div>
<div>
<b>No place (3W - 2L)</b></div>
<div>
<br /></div>
<div>
Finally here Saturday morning and still no name for the beetleweight DDT clone. Despite the controls oriented suggestions given by other builders, my friends agreed to Silent Spring, the name that Nate Franklin had originally proposed. Once I explain the reference people think its clever >_></div>
<div>
<br /></div>
<div>
Regardless of the name SS's day started out rougher than most. During safety, the drive motors would not shut off! I traced the issue back to the receiver, which does not appear to support failsafe protocol on the elevator and aileron channels. Broke a few wires swapping back to the reliable OrangeRx 6ch receiver but that was quickly handled by butchering a bind plug. SAFETY ALERT! THE <a href="http://www.hobbyking.com/hobbyking/store/__32093__OrangeRx_DSMX_Compatible_DSMX_3Ch_S_BUS_2_4Ghz_Rx.html">3CH S.BUS RX</a> DOES NOT PASS FAILSAFE!</div>
<div>
<br /></div>
<div>
<b>Silent Spring v Rmr</b></div>
<div>
Soon we were ready to fight and SS pulled Rmr, a fellow MIT bot from MITERS. This bot featured an overhead spinning bar and an O-ring track system for drive. </div>
<div>
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-huaENEPabPA/VPIi9SArmYI/AAAAAAAADHA/3mGdDhggqQw/s1600/20150221_134924.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="192" src="http://1.bp.blogspot.com/-huaENEPabPA/VPIi9SArmYI/AAAAAAAADHA/3mGdDhggqQw/s1600/20150221_134924.jpg" width="320" /></a></div>
<div>
<br /></div>
<div>
The fight was against his favor since my blade could reach under his blade to land hits on his body without hit myself. However, without ANY driving practice on SS, It would be very easy to over travel after a hit where Rmr could get my sides or even a wheel.</div>
<div>
<br /></div>
<div>
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/phL9Tc9Q5kU" width="560"></iframe>
</div>
<div>
<br /></div>
<div>
Because of that, I played on the cautious side and took smaller pokes. One of the first few glancing blows actually did result in him landing a body shot, but without critical damage I was able to continue the attack. Still, some nice scars there.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-DPAnnvIbGqc/VPIlGteL1-I/AAAAAAAADHM/tE71xhoI8kE/s1600/20150221_142010.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="192" src="http://1.bp.blogspot.com/-DPAnnvIbGqc/VPIlGteL1-I/AAAAAAAADHM/tE71xhoI8kE/s1600/20150221_142010.jpg" width="320" /></a></div>
<br /></div>
<div>
<br /></div>
<div>
<b>Silent Spring v Time Warp</b><br />
Now hearing I would be fighting the modified Trilobite kit, I decided to take my time in repairing the drive belts which appeared to be loose in my first match. I would need every ounce of maneuverability to escape this bot. On top of the Trilobite base, Time Warp featured an angular plow from what appeared to be welded and treated steel. There was no way I could bite through that plow but as it would have it, I didn't need to.<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/6dAj-JJfY8s" width="560"></iframe>
<br />
I spun up to full and decided to focus on keeping the blade forward. Time Warp came to me with the plow first and after several big hits the pins keeping the shaft on gave up and the plow came off. If it didnt break at the collar, it might have broken at the beak. Small cracks were beginning to form.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-DkYfBuLYXJI/VPIoNm3t8hI/AAAAAAAADHg/HG8qZHoPPR0/s1600/20150222_105233.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="192" src="http://3.bp.blogspot.com/-DkYfBuLYXJI/VPIoNm3t8hI/AAAAAAAADHg/HG8qZHoPPR0/s1600/20150222_105233.jpg" width="320" /></a></div>
<br />
<br />
However the blade had slowed significantly by the end. I had not received any visible damage but I could not spin up the weapon. This time dependent shortcoming would plague me for the rest of the tournament.</div>
<div>
<br /></div>
<div>
<b>Silent Spring v Devastating Moment</b><br />
Joey and I had once fought antweights in 2008. His Swamp Woman vs my DDT. DDT managed to get the better of that one but only because SW was an unweaponed bot. Now Joey had a Weta kit with a custom steel eggbeater. It sounded mean!<br />
<br />
Unlike In the Margins (Weta Killer), SS has a thick blade which is better for big hits and less effective for chopping or grabbing. I would only be able to get good hits on hard surfaces and so instead of aiming for the feet, I aimed directly for the weapon bar.<br />
<br /></div>
<div>
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/udhFpLn6q3c" width="560"></iframe>
</div>
<div>
<br />
I was essentially relying on the robustness of the robot mechanics since at this point I had not sorted out the weapon ESC issue. If I stopped spinning it could be over for me. I got lucky this time when he shut off unexpectedly after two big hits and couldn't continue.<br />
<br />
<b>Speed Wedge 3 v Silent Spring</b><br />
I met Ian this year when I spoke to him a bit in the pits. It didn't take long for me to realize a quality builder and solid competitor. When I pulled this match up, I predicted a loss immediately. With the spotty ESC and his driving skill, attrition would work against me. Well, I don't need to say much more do I? Loss by judges decision :P<br />
<br /></div>
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/DgIsKeT5mWs" width="560"></iframe>
<br />
<div>
<br /></div>
<div>
<b>In the Margins v Silent Spring</b><br />
AHHHHHHHHHHHHHH WHY DID I HAVE TO LOSE. The most horrible match up pits friends against friends in the loser's bracket and its not even the finals! Last time Aaron and I had fought was actually last year where we went 1-1 against each other in the total annihilation of Dominant Mode.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-O2aGgv5_XfU/VPI3Y6iOulI/AAAAAAAADHw/y9SsgeqTxd8/s1600/20150222_164612.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="192" src="http://1.bp.blogspot.com/-O2aGgv5_XfU/VPI3Y6iOulI/AAAAAAAADHw/y9SsgeqTxd8/s1600/20150222_164612.jpg" width="320" /></a></div>
<br />
This year we both built bots to last. Plastic construction, horizontal disks. It was shaping up to be a good match... but ended up pretty sad. Two soft hits in, my power switch opened up and SS turned off. Slim got a nibble on my wheels afterwards. Ah well, Aaron will have to carry the flag for the both of us (but ended up losing to Speed Wedge 3 also :/)!<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/ceJReySQWIg" width="560"></iframe>
<br />
<br />
<b>Beetleweight Rumble</b><br />
Immediately after the In the Margins match, I put SS into the rumble. Literally, re-tightened the fingertech switch and threw it into the box. I used this time to play with the throttle a bit and see if I could discern the cause of the ESC problems. It looks like if I keep the weapon at max the entire time it will power up quite alright.<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/zH5A9W0nztI" width="560"></iframe>
<br />
That was it for Silent Spring. A solid robot with great potential, hampered by some bad electronics. Without another competition in the near future, I'll have plenty of time to figure this issue out. For the time being, Silent Spring has succeeded in its primary goal: Be entertaining and don't get destroyed :)</div>
<div>
<b>________________________________________________</b></div>
<div>
<b>Attrition</b></div>
<div>
<b>1st Place (4W - 0L)</b><br />
<br />
Having started so far in advanced, Attrition's check-in was straight forward. For the rest of the competition, all I ever had to do was swap out batteries and decide whether to use the wedgelets or not. All these upgrades paid off and made Attrition a clear winner this time around.<br />
<br />
<b>Attrition v Maul</b><br />
Maul was another bot that came out of MITERS but one I had not seen before. Partially because I don't frequent MITERS much anymore but also because I was led to believe the robot was still being completed at the event as it was safety checked immediately before the match. - _ -<br />
<br />
It appeared to be some sort of thwack bot with cutting tools for wheels. The chassis was made from a rather thick steel pipe and there wasnt any chance of going through it. So, I opted to punt it around until he tapped out.<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/U-ZdqsOr8AY" width="560"></iframe>
<br />
<br />
<b>Attrition v Hyper Drive</b><br />
When Cataclysm totaled Apollyon in 2013, part of me cheered just because I wouldnt have to face this legendary wedge bot in the future. However, Mike sold the bot to master craftsman Jerome Miles who then put the drive setup from his 60 lber into it and renamed it Hyper Drive. Oh dear.<br />
<br />
Hyper Drive is an appropriate name. It has two massive inrunner brushless motors coupled to dewalt gearboxes for drive. It could move and spin fast enough to do reasonable damage in a thwacking mode. If it were more controllable, he could totally dominate this match.<br />
<br />
I decided to play it safe. Start with low drum RPMs and gain maneuverability. I also put on the short wedgelets to help with his front wedge. Shortly into the match, HD lost one side of his drive (gearbox slid out) and I was able to flip him over using the wedgelets. How inverted and nearly immobile, I turned up the drum to full to try and lay on the killing blow. That hit took off the wheel on his good gearbox and Jerome tapped out.<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/XVUveqt0G7E" width="560"></iframe>
<br />
<br />
<b>Attrition v Isotelus Rex</b><br />
Here we are! I finally get to fight my pushybot rival! I knew ahead of time that he would be using the snout again, so I best optimize for driving. Therefore I employed the same strategy as I had against Jerome in the match previous.<br />
<br />
Things were going according to plan. I was able to dodge out direct attacks from the snout and lay some pecks on the Ti guard. A few flips went in my favor to added aggression points. Occasionally the drum would contact the snout and I actually noticed white plastic flaking off into the arena. At this RPM (and perhaps because my teeth were still sharp) I could bite into this snout instead of being deflected by it. I started going head on into whatever angle I could and was still able to toss him about.<br />
<br />
For the last 30 or so seconds, I turned up the drum again like I did against HD. At this point there was enough damage to the plow to render the snout ineffective. Some showers of sparks and a few more tosses for good measure to start strong, end strong, and give Attrition a shot at 1st this year.<br />
<br />
<iframe width="560" height="315" src="https://www.youtube.com/embed/xW5jZmF3NUk?rel=0" frameborder="0" allowfullscreen></iframe>
<br />
<br />
<b>Attrition v Isotelus Rex (FINALS)</b></div>
<div>
Isotelus Rex and Ripto fought a close match in the loser's bracket finals. Amazingly, Isotelus Rex came out the winner after 5 mins or so of judges arguing. I figured I would run the same strategy as the first time I fought him but it turns out it was not needed. He suffered damage to his gearmotors in the match previous and was unable to make the repairs in time. This left Isotelus with one drive, which severely handicapped his awesome driving power. After a few hits, he tapped out and Attrition was crowned the 12lb champion!<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/c5b6MVWIZpg" width="560"></iframe>
<br />
<br />
Motorama couldnt have gone any better for Attrition. Progressing from 3rd, to 2nd, and finally 1st was a hard battle through the years but taught me many things about robust designs. I am happy to say everything I learned about engineering was well worth it and demonstrated in this little robot. Next year I hope to fight against my other rivals in the division such as Ripto and Cataclysm. This will be the true test of this robot. </div>
<div>
<b>________________________________________________</b></div>
<div>
<b>MegatRON</b></div>
<div>
<b>2nd Place (3W - 2L)</b><br />
<br />
With a tightened clutch and new dustpan, I had hopes for Ron at least as a pushybot. It has been forever since I had driven a non weaponed robot and in particular my old old design from my childhood. We would see what the future holds this year at Motorama<br />
<br />
<b>MegatRON v Candy Paint and Gold Teeth</b><br />
The first match was ALSO against an MIT folk! I felt like they were trying to phase us out from the start! Even worse, it was against my buddy Charles and his mean overhead bar spinner. He told me he was going to spin slow and have fun. I obliged but encouraged him to make it entertaining as well. I put on the abrasive saw to make sparks but not penetrate his aluminum frame.<br />
<br />
He did not disappoint. At the speed he chose to spin, a slight pertubation from Ron's dustpan caused him to flip over. However, he had enough torque to Tornado-mer dance! What followed was nearly 3 minutes of watching CPGT try to self-right with the occasional Ron interjection with the saw blade. Eventually, Charles burnt out his motor and CPGT was counted out.<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/11HTR2xoSUw" width="560"></iframe>
<br />
<br />
There was some damage after the match! CPGT was wailing around Ron so hard, that one of the cast aluminum pillow blocks actually shattered and left the arm in danger of a single supported system. I was quickly able to hack a solution together by taking my spare P60 gearbox face and using it as the far end pillow block.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-3AjNrczQCFw/VPJAHkWFs3I/AAAAAAAADIA/3bO_5XHH1TY/s1600/20150221_164807.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="192" src="http://2.bp.blogspot.com/-3AjNrczQCFw/VPJAHkWFs3I/AAAAAAAADIA/3bO_5XHH1TY/s1600/20150221_164807.jpg" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-Z0-qZIfGqs8/VPJAHzKOAOI/AAAAAAAADIE/FUeVHmncg58/s1600/20150221_164815.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="192" src="http://1.bp.blogspot.com/-Z0-qZIfGqs8/VPJAHzKOAOI/AAAAAAAADIE/FUeVHmncg58/s1600/20150221_164815.jpg" width="320" /></a></div>
<br />
<br />
A very expensive pillow block - _ -.<br />
<br />
<b>MegatRON v Whammy Bar</b><br />
Whammy bar looked to be a deadly horizontal bar spinner. What made it scarier, is the fact that nobody has seen it hit anything yet! Alex tapped out early in his fight with WB before they could make contact so I will be the first to feel its teeth.<br />
<br />
I went out to box rush him but missed! Argh! He was able to get up to near full speed when we made contact. The Ron took the hits like a champ but WB could not. Somewhere inside his robot, a component popped loose and WB stopped moving. Ron, and his ineffective saw, moves on :P<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/waqKAHUk7N0" width="560"></iframe>
<br />
<br />
Damage pics! That penetration!<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/--9GhH6ZSRzw/VPJBND4pwZI/AAAAAAAADIY/6xPf_kS96YY/s1600/20150221_194956.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="192" src="http://3.bp.blogspot.com/--9GhH6ZSRzw/VPJBND4pwZI/AAAAAAAADIY/6xPf_kS96YY/s1600/20150221_194956.jpg" width="320" /></a></div>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-lJ9e1sWA1EY/VPJBNGsN7dI/AAAAAAAADIU/vm7zrLMX_is/s1600/20150222_135843.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="320" src="http://2.bp.blogspot.com/-lJ9e1sWA1EY/VPJBNGsN7dI/AAAAAAAADIU/vm7zrLMX_is/s1600/20150222_135843.jpg" width="192" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Whammy bar adds a nice dent on the inner of one pontoon</td></tr>
</tbody></table>
<br />
<br />
<b>MegatRON v The Magnificient Poncho</b><br />
I've always been impressed by Poncho. It is such a simple robot but with power and good driving it can conquer the toughest opponents. Earlier in the competition, Poncho defeated last year's champ Triggo. I will have to break out my best driving to stop him.<br />
<br />
I used a lot of spin tactics to deflect his charges since I knew a head on collision would most likely be against my favor. I had a wide wedge and sloped sides that could be used to scoop around his pushing angle. This was effective for getting under him.<br />
<br />
In the second half of the match, I was noticing a lot of over steering in my driving. I could see from my driver's stand that my one side of wheels were free spinning! Ah! the banebots keyway had stipped out! Luckily I could still drive a bit but I was definitely trying to just outlast poncho at the end. We got stuck together twice which helped in stalling for time. (normally I would able to spin him out of the tray if I had both drive sides...) The judges voted in my favor and MegatRON goes to the finals!<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/EoEe8QBv5fE" width="560"></iframe>
<br />
<br />
Some pictures of the wheel casualties.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-sjzR-vjJTyw/VPJDLgEyBAI/AAAAAAAADIo/PvTFhkeA4ig/s1600/20150222_185225.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="192" src="http://1.bp.blogspot.com/-sjzR-vjJTyw/VPJDLgEyBAI/AAAAAAAADIo/PvTFhkeA4ig/s1600/20150222_185225.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">4 old megatRON wheels. Since last year.</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-OD6ZR-a9uKs/VPJDL8qjrgI/AAAAAAAADIs/m27t0n8jTak/s1600/20150222_185230.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="192" src="http://1.bp.blogspot.com/-OD6ZR-a9uKs/VPJDL8qjrgI/AAAAAAAADIs/m27t0n8jTak/s1600/20150222_185230.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Banebots keyed wheel sheared section.</td></tr>
</tbody></table>
<br />
<br />
Thankfully, Jerome was nice to give me two replacement wheels. they didnt match the 40A's that I had as spares, but they would work for now. Thanks Jerome!<br />
<br />
<b>MegatRON v Triggo (FINALS 1)</b><br />
Oh man, it is finally time. Many people would fear fighting Triggo but to be honest I wanted this fight to happen. As soon as Triggo was announced over Whammo, Charles and I had actually cheered.<br />
<br />
I knew this fight would be among the hardest I've had in awhile. And to not drive a weaponed bot make it all the more exciting. There is some thrill in depending on skill. Being the robot that could be destroyed, trying to outlast the stronger robot. That is what I was looking forward to and that is what I got.<br />
<br />
Starting out a bit tentative, I let him spin up a bit because I thought the dustpan was steep enough to deflect him. While that worked for a bit, he caught the right corner of the dustpan and spun the bot around catching another edge and flipping Ron. I had the clutch relatively loose to prevent stalling the motor but in this case it proved harmful as Ron could not invert. I had to tap out to save the robot before Triggo's next attack.<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/1JE0RDaQICI" width="560"></iframe>
<br />
<br />
<b>MegatRON v Triggo (FINALS 2)</b><br />
This time, I went as hard as I could. A solid box rush from the start slowed him but not enough to stop him. From there I had to stay on him as much as possible and keep him off his toes. A careful balance of poking with the wedge would tilt him and force him to spin down or lose control.<br />
<br />
However, the two hits from the previous match took its toll on the dustpan; it was slightly tweaked on the right side and could actually go over the shell as he teetered out of control. During these times I was unable to control Triggo and wasted a lot of critical moments.<br />
<br />
Finally I was able to herd him into a corner but... Ron stopped moving! ARGH! He crapped out in front of my drivers corner so I could see that the powerlink (an XT60) was much much higher than it was supposed to be. Meanwhile Triggo was slamming himself into the pan and into the walls to push himself free. When he finally escaped, I tapped out to prevent a juicy juicy free hit on the arm.<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/embed/k1LtCxWvA2o" width="560"></iframe>
<br />
<br />
People tell me I was winning that match but I didnt really care. it FELT EPIC! And that feeling alone was satisfaction enough. MegatRON would take 2md place to the 2014 champ Triggo. No shame in losing in the finals to a spectacular robot.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/-0DuLrtw1VxM/VPKczzlm2yI/AAAAAAAADJ0/36ikvO2l33c/s1600/20150222_190852.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="192" src="http://4.bp.blogspot.com/-0DuLrtw1VxM/VPKczzlm2yI/AAAAAAAADJ0/36ikvO2l33c/s1600/20150222_190852.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Triggo, the 2014 and 2015 Motorama 30lber champion</td></tr>
</tbody></table>
<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/-Jk1KNRZnS-A/VPJDvGgt-vI/AAAAAAAADI8/ZaORtXCDmfk/s1600/20150222_181722.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="192" src="http://4.bp.blogspot.com/-Jk1KNRZnS-A/VPJDvGgt-vI/AAAAAAAADI8/ZaORtXCDmfk/s1600/20150222_181722.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">MegatRON after the 2nd triggo fight</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/-8glBV0H38KE/VPJDvYWPaYI/AAAAAAAADI4/llStvFHUgcM/s1600/20150222_181744.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="192" src="http://4.bp.blogspot.com/-8glBV0H38KE/VPJDvYWPaYI/AAAAAAAADI4/llStvFHUgcM/s1600/20150222_181744.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Triggo nibbled at the wheels.</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://3.bp.blogspot.com/-TWY2XClPjL4/VPJDvG2C9qI/AAAAAAAADJA/E4aD9Aunens/s1600/20150222_181759.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="192" src="http://3.bp.blogspot.com/-TWY2XClPjL4/VPJDvG2C9qI/AAAAAAAADJA/E4aD9Aunens/s1600/20150222_181759.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">.. and did damage to the dustpan</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhopPXSwrX6DPN6Q0Kb2hH39iuDF_wR_1euzzyIQzkeeqxpvH5pGbBvPpuEIwHW-csdOOUFM61SZPOf3gxOMNTmuVHwJyRbvCtG_mSaY2GW7Ad9yLwd6b7GXZ3wyrdP9WAaITxYP1iKJpM/s1600/20150222_185718.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="192" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhopPXSwrX6DPN6Q0Kb2hH39iuDF_wR_1euzzyIQzkeeqxpvH5pGbBvPpuEIwHW-csdOOUFM61SZPOf3gxOMNTmuVHwJyRbvCtG_mSaY2GW7Ad9yLwd6b7GXZ3wyrdP9WAaITxYP1iKJpM/s1600/20150222_185718.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">The right side corner which was already raised was further chewed by Triggo. The left side is still pristine!</td></tr>
</tbody></table>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
To conclude this post, I'd like to shout out to the many many people who made this event a great success, a great time, and overall made the experience of robot combat a wonderful idea. First is my bud Charles Guan, who I give credit to for the numerous resources and help used in building my bots. He also drove the group of us through the snow to get to Moto. None of this would be possible without you man! Then I'd like to mention the MIT and GT crew for a friendly competitive atmosphere and help in repair time. I find that things are most fun when you have your friends and robot fighting is no exception. Not to mention their unyielding support. Xo, Aaron, Gabe, Chad, Adam, Dane, Charles, Paige, Cynthia, Rebecca, Ciaran, Ian, and James here is to you! And I really really hope I didnt miss anyone. I would also like to note exceptional builders who made it a really great time. Zac, Mike, Alex, Kyle, and Jerome were kind enough to offer me parts and help in times of repair. And most important are the folks at NERC who kept the show running. That's Ed, Beth, Jon, James, Kyle, Rob, and Mike and many many more Im sure. Thanks for making Moto one heck of an event!.</div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: left; margin-right: 1em; text-align: left;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/-8Agr5bpDL_4/VPJD38ocvBI/AAAAAAAADJc/dbEdJWhyY1o/s1600/20150222_200613.jpg" imageanchor="1" style="clear: left; margin-bottom: 1em; margin-left: auto; margin-right: auto;"><img border="0" height="120" src="http://4.bp.blogspot.com/-8Agr5bpDL_4/VPJD38ocvBI/AAAAAAAADJc/dbEdJWhyY1o/s1600/20150222_200613.jpg" width="200" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Attrition, 12lber champion of Motorama 2015</td></tr>
</tbody></table>
<table cellpadding="0" cellspacing="0" class="tr-caption-container" style="float: right; margin-left: 1em; text-align: right;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-yyDg7uLskcM/VPJD31kX1CI/AAAAAAAADJY/OCzIUlhy_Jc/s1600/20150222_200624.jpg" imageanchor="1" style="clear: right; margin-bottom: 1em; margin-left: auto; margin-right: auto;"><img border="0" height="120" src="http://1.bp.blogspot.com/-yyDg7uLskcM/VPJD31kX1CI/AAAAAAAADJY/OCzIUlhy_Jc/s1600/20150222_200624.jpg" width="200" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">MegatRON, 30lber runner-up of Motorama 2015</td></tr>
</tbody></table>
<br />
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<br /></div>Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com3tag:blogger.com,1999:blog-1588984194759318117.post-60141647721783889522015-02-06T04:56:00.002-05:002015-02-10T15:33:12.867-05:00Attrition: Final Push for Motorama 2015Last post you saw a glimpse of the tragic history of my first and only Hobbyweight (12) combat robot. At the end, I declared I would try my hardest to take the title this year and have implemented extensive upgrades to make it happen. It goes without saying that I did a complete teardown of the robot and its systems but here are the main points to remember moving forward.<br />
<br />
<b>Super-awesome new drums from Westar Bot Shop (Team Whyachi)</b><br />
<br />
Last year the drum from 2008 finally gave up. Usually this is the point where builders will reevaluate their design and decide to build an entirely new bot all together. However seeing as how the chassis was nearly undamaged, there wasnt a point in rebuilding that so we will just build the drum again but better.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-D8hSJyeIUPs/VMrf4Lb1C1I/AAAAAAAADCU/QYXN_Z4uCEo/s1600/Attrition%2BDrum%2B12262014.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-D8hSJyeIUPs/VMrf4Lb1C1I/AAAAAAAADCU/QYXN_Z4uCEo/s1600/Attrition%2BDrum%2B12262014.JPG" height="247" width="320" /></a></div>
<br />
<br />
For this, I had the drums sent to a professional machine shop. <a href="http://www.teamwhyachi.com/botshop.htm">Team Whyachi has been providing fabrication services for years</a> and resulted in years of super happy customers. You can find their page hyperlinked numerous times above. I sent them some relatively simple drawings and Clint Ewert immediately went to work. I started conversing with him maybe Dec 31 2014 and I had the drums back to me 1-2 week of January. Talk about quick turnaround!<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-cboJ6VH4LSc/VMrbz3SyV0I/AAAAAAAADAY/GGGokRDIDqg/s1600/20150115_183319.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-cboJ6VH4LSc/VMrbz3SyV0I/AAAAAAAADAY/GGGokRDIDqg/s1600/20150115_183319.jpg" height="192" width="320" /></a></div>
<br />
<br />
The drum is still the same dimensions as the previous one (3" OD, 2.75" ID, 3.625" T-to-T) but the materials are now compatible. 4130 steel all around, hardened afterwards. I asked for 50-55 C Rockwell but some metals treatment literature say 4130 can only be hardened up to 45 C. I'll take the spare to the Rockwell tester to see how it actually came out.<br />
<br />
BTW, I bought 2! Two drums for a total of $650 including shipping. Whyachi paid for materials, did machining and services, and a batch of heat treating which makes this a phenomenal deal! Plus, all dimensions are within 0.005" tolerance specification which is ABSURDLY GOOD for welding and HT. Would recommend again!<br />
<br />
The bigger issue now is the fact that there was some internal damage to the motor components. While the Whyachi drums were on the way, I cracked open the drum to harvest the relevant components.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-tHLKb38IubQ/VMrb7p6EGLI/AAAAAAAADAg/if2xL-OJJe4/s1600/20150112_232030.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-tHLKb38IubQ/VMrb7p6EGLI/AAAAAAAADAg/if2xL-OJJe4/s1600/20150112_232030.jpg" height="192" width="320" /></a></div>
<br />
<br />
Oops. Isnt that supposed to be attached? This was the worst problem among the shattered bearings and dented races because that motor isnt cheap by far. I evaluated at this point if I should purchase a Turnigy equivalent to replace it.<br />
<br />
What I ended up doing was JB welding the motor to the shaft. While this make it an incredibly permanent solution, I recognize that the state is fully encapsulated by the can and drum; It should be simple enough to salvage if things go completely bad. I think I am fortunate that none of my motor wires sheared. This gluing process was done with the guts in the frame. Because the center races are all in compression, it locates all the components securely.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-ABD3O_21AB0/VMrcFYJxh1I/AAAAAAAADAo/Duc-CkH6kg0/s1600/20150116_155917.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-ABD3O_21AB0/VMrcFYJxh1I/AAAAAAAADAo/Duc-CkH6kg0/s1600/20150116_155917.jpg" height="192" width="320" /></a></div>
<br />
<br />
I decided not to paint this drum. Partially because I was impatient but also because spraypaint would have fouled my tolerances inside the drum. I may consider painting the spare if the first drum gets damaged.<br />
<br />
<b>Revamped drive system</b><br />
<br />
The majority of work was actually put into redoing the drive train. As mentioned previously, I lost a good majority of matches due to drive faults. The first modification to take place was the center double pulley. Last year the FDM pulley had far too much torque at the shaft and displaced the set screws threaded into the pulley.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/--9duxOGxJI8/VMrdojCip3I/AAAAAAAADBQ/VeSZ9lwThVE/s1600/20150105_232620.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/--9duxOGxJI8/VMrdojCip3I/AAAAAAAADBQ/VeSZ9lwThVE/s1600/20150105_232620.jpg" height="192" width="320" /></a></div>
<br />
<br />
This year, I borrowed some design concepts from Charles Guan. I started with some 5/8" aluminum hex and turned those into intermediate shafts. The hex would go over the nominal gearmotor shaft providing me a meaty aluminum interface for set screws and the like as well as a hex cross section for torque transfer. Snap rings on either end would prevent the pulley from sliding off the ends.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/--B0dBnw9zpU/VMrd3-7XoXI/AAAAAAAADBY/3WYvWtIwYys/s1600/20141217_233231.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/--B0dBnw9zpU/VMrd3-7XoXI/AAAAAAAADBY/3WYvWtIwYys/s1600/20141217_233231.jpg" height="192" width="320" /></a></div>
<br />
<br />
The pulleys themselves were selective laser sintered (SLS) nylon from <a href="http://www.shapeways.com/">Shapeways</a>. They were my usual 20T XL pulleys but designed to go over the hex. I got them in black and red; the red set being the test set. I wasnt too certain about the durability of SLS parts so I got the red set to test part durability. If at any time during a test I saw red powders on the bot I would determine they pulleys not combat grade. Black would have been much harder to spot.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-Swlz07X-UKA/VMrdTWoDISI/AAAAAAAADBA/NQMdrKU-8NQ/s1600/20150105_231953.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-Swlz07X-UKA/VMrdTWoDISI/AAAAAAAADBA/NQMdrKU-8NQ/s1600/20150105_231953.jpg" height="192" width="320" /></a></div>
<br />
<br />
The entire setup comes together like this:<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-jEbLd6VcrYM/VMrdbw-eLMI/AAAAAAAADBI/3nX7fEtKskg/s1600/20150105_232756.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-jEbLd6VcrYM/VMrdbw-eLMI/AAAAAAAADBI/3nX7fEtKskg/s1600/20150105_232756.jpg" height="192" width="320" /></a></div>
<br />
<br />
Pretty neat eh? Initial test drives with the old motors were promising. No red flakes to be seen, nor belt slipping or tooth shearing. We'll run it later in the week with the weapon for some harder durability tests.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-0F1PXekFPHU/VMrgKftTNmI/AAAAAAAADCc/ubl9nI-7IO8/s1600/20150105_235858.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-0F1PXekFPHU/VMrgKftTNmI/AAAAAAAADCc/ubl9nI-7IO8/s1600/20150105_235858.jpg" height="192" width="320" /></a></div>
<br />
<br />
Next was the motor. Currently, I use "long can 400" motors or "480 sized" motors. I used to use Banebots 395 motors but they were too slow. See the difference between last year and the year prior. That shows nearly 4 mph of difference in speed! There are a number of 480 sized motors on the market but they are usually used for direct drive prop airplanes which means they are typically low voltage, hot wound, and timed. The trick for me would be to find something mid voltage, mild wind, and neutral timed. This search proved to be near impossible.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-KM_D244VEMs/VMrdMbliiNI/AAAAAAAADA4/rKFYp9eUodI/s1600/20150108_183914.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-KM_D244VEMs/VMrdMbliiNI/AAAAAAAADA4/rKFYp9eUodI/s1600/20150108_183914.jpg" height="192" width="320" /></a></div>
<br />
<br />
I ended up getting four of these 480 motors from <a href="http://www.parkflyers.com/">RC parkflyers</a>. But testing proved that they were actually 6V native motors and I quickly burned one out. Ugh.<br />
<br />
A second option was to modify the mechanics of the gear reduction. The gearboxes are largely custom inside Attrition so this would not be easy. Essentially I needed a way to replace the existing stages with low reduction stages only. Some searching on Alibaba for 32mm planetary gearmotors turned up some interesting concepts. I found my 19:1 gearmotor model but the vendor actually sold a 14:1 and even a 11:1! What did this mean? This meant other stage combinations existed and this modification was in fact possible.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-HQrVj6Cz1YM/VMreVZmCu6I/AAAAAAAADBg/XDKQHcLXY3k/s1600/20150123_161917.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-HQrVj6Cz1YM/VMreVZmCu6I/AAAAAAAADBg/XDKQHcLXY3k/s1600/20150123_161917.jpg" height="192" width="320" /></a></div>
<br />
<br />
I did my research on gearmotors. Servo City sells 32mm gearmotors as well but their spec sheets are incomplete. Super Droid Robot Land provided the manufacturer's specification sheet which clearly indicated either 11T ot 17T sun gears. BINGO! That means there are only two types of reductions and they are either 3.7:1 or 5.2:1 as previously mentioned.<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjJWv3pc9VD8yZYVxDEb-ELZ0_8uEYYXoyxrspBvqCQrpkC1XNo3D5iBtoRLwY9Z7_xt_a738tZpeRkZitgMIfmWi0bTMHXtUQnuhW8py1I4ySo_Mkpmt2Bl1lgrPVJgU9FbDmQJrIqtA0/s1600/20150123_161945.jpg" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjJWv3pc9VD8yZYVxDEb-ELZ0_8uEYYXoyxrspBvqCQrpkC1XNo3D5iBtoRLwY9Z7_xt_a738tZpeRkZitgMIfmWi0bTMHXtUQnuhW8py1I4ySo_Mkpmt2Bl1lgrPVJgU9FbDmQJrIqtA0/s1600/20150123_161945.jpg" height="120" width="200" /></a></div>
<a href="http://1.bp.blogspot.com/-gy93H2GbpKI/VMrexDKcFaI/AAAAAAAADB8/7cIo9h5wAtU/s1600/20150123_161935.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-gy93H2GbpKI/VMrexDKcFaI/AAAAAAAADB8/7cIo9h5wAtU/s1600/20150123_161935.jpg" height="120" width="200" /></a><br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Then I combed through their standard reductions and factored their values by the two stage types. From this I can accurately tell what stages and how many will be inside each gearbox. I bought a 51:1, which is composed of three 3.7:1 stages.<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-ppeGvU13cjU/VMreiswp4XI/AAAAAAAADBs/99MQDjpQtQo/s1600/20150123_194718.jpg" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" src="http://2.bp.blogspot.com/-ppeGvU13cjU/VMreiswp4XI/AAAAAAAADBs/99MQDjpQtQo/s1600/20150123_194718.jpg" height="120" width="200" /></a></div>
<a href="http://2.bp.blogspot.com/-C7UJI79Lsis/VMreion1zzI/AAAAAAAADBo/WGwDIvejsxs/s1600/20150123_193953.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-C7UJI79Lsis/VMreion1zzI/AAAAAAAADBo/WGwDIvejsxs/s1600/20150123_193953.jpg" height="120" width="200" /></a><br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Looks like the first stage is plastic. Not a problem since the other two were metal. Now I could use the slower but mild wind Banebots 395 motors to give me about 8.3 mph. It isnt as fast as last year but should accelerate faster. Plus, I can actually buy spares! While I was at it, I decided to replace the worn components in the gear motors. New shafts, new bearings, new steel shims!<br />
<br />
<b>Actual thought put into front attachments</b><br />
<br />
Now this isnt a primary point of failure, but while I was putting my all into retrofitting the robot I might as well address this as well. Typically, I would run with or without wedgelets which were little slivers of titanium held on with stacks of UHMW shims that acted as spring loaded hinges. It was a neat idea for awhile but the ultimate lack of durability in the UHMW was a failure point in that they were easily sheared off.<br />
<br />
After fighting designs like Thomas Kenny's "Shame Spiral" and Pete Smith's "Isotelus Rex", I realized there is a clear winning design to fight the "Solaris" drum bot design and that magical snout was the trick. To counter battle, I would play the arms race against their ramming plows.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-PpJNt6PiBOU/VNprArBXNPI/AAAAAAAADEU/lFbeXIn1-go/s1600/20150209_112402.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-PpJNt6PiBOU/VNprArBXNPI/AAAAAAAADEU/lFbeXIn1-go/s1600/20150209_112402.jpg" height="192" width="320" /></a></div>
<br />
<br />
I had these modeled in previous models but never took the time to make them. Now that I had "MegatRON" parts being made from Big Blue Saw, I decided to throw on some small parts for Attrition. Now I have a number of wedgelets in various lengths to handle general purpose wedges and specialty designs.<br />
<br />
The one type of spinner Attrition has somehow managed to avoid are massive horizontal bars. For these designs, I have some additional defenses in the works, but no need to reveal them yet ;)<br />
<br />
<b>Loads and loads of spare parts</b><br />
<br />
This time, I will not lose from lack of preparedness! I am bringing all this and more in case I have failures. These are the expected points of failure so it is possible other things can happen. However, should any of those parts take damage, the bot probably deserves to be retired. Lets hope I predicted correctly!<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-6BY0CW8Pkgg/VNSPawkVBfI/AAAAAAAADCw/9hYZtlyFTjQ/s1600/20150205_203304.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-6BY0CW8Pkgg/VNSPawkVBfI/AAAAAAAADCw/9hYZtlyFTjQ/s1600/20150205_203304.jpg" height="192" width="320" /></a></div>
<br />
<br />
At this point, we are more/less ready to rock. I'll be running some durability tests with Charles between now and then so be sure to check out those vids when them come out. Cheers and bot on!<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-UOU7-QZ0ZKg/VMrcVxxjk5I/AAAAAAAADAw/CD-hqPwcR0A/s1600/20150116_205537.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-UOU7-QZ0ZKg/VMrcVxxjk5I/AAAAAAAADAw/CD-hqPwcR0A/s1600/20150116_205537.jpg" height="192" width="320" /></a></div>
<br />Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com2tag:blogger.com,1999:blog-1588984194759318117.post-48197073735591975032015-01-17T22:09:00.000-05:002015-01-17T22:36:34.540-05:00Attrition: The Unspoken HobbyweightBefore I get into this long long post, I want to mention the existence of my Facebook page. There, I make smaller posts on more incremental work (which is where I've been more recently).<br />
<br />
<div style="text-align: center;">
<a href="https://www.facebook.com/thevariableconstant">https://www.facebook.com/thevariableconstant</a></div>
<br />
So if you want to see more consistent updates, I suggest you go there and follow :P<br />
_________________________________________________________________________________<br />
<br />
<b><span style="font-size: large;">Prelude:</span></b><br />
Long long ago, I built a hobbyweight with the help of fellow bot people like Brian Schwartz and Casey Kuhns. This was back in 2008 which for me was high school and my resources were limited so I would like to take yet another moment to thank those mentioned above. However, I did not blog about it because my blog did not yet exist. Later versions of the robot were also gone unmentioned (such as my Motorama '13 and Motorama '14 posts). I find it now necessary to log the development of this power-dense combat robot.<br />
<br />
<b><span style="font-size: large;">2008-2009:</span></b><br />
This robot was a drum spinner (as was the flavor of the month) and was a wonderful blend of scavenged robot parts. It used a set of 5:1 'mabuchi' gearmotors I scored from ebay, a set of BB 12-45 escs I bought off a leaving bot member, and batteries given for doing a favor for another bot member. I bought a 40 mm copier stator to wind the brushless motor and had machining help as mentioned above. Furthermore, I had machining services donated by local companies to make my drum, an odd combination of 4130 for the drum body and A2 tool steel.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-hFzzWRIuVKA/VLsMO9ho0lI/AAAAAAAAC6o/OPL_M7y8AyQ/s1600/SCD40013.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-hFzzWRIuVKA/VLsMO9ho0lI/AAAAAAAAC6o/OPL_M7y8AyQ/s1600/SCD40013.JPG" height="150" width="200" /></a><a href="http://3.bp.blogspot.com/-WB3xcMB_TqE/VLsMOrZJVEI/AAAAAAAAC6g/sC8S151fRvs/s1600/SCD40168.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-WB3xcMB_TqE/VLsMOrZJVEI/AAAAAAAAC6g/sC8S151fRvs/s1600/SCD40168.JPG" height="150" width="200" /></a></div>
<br />
<br />
Please for heavens sake do not weld those steels together. EVER. Looked okay but was difficult to heat treat you might imagine...<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/--bOeYprhANs/VLsMamCSxyI/AAAAAAAAC64/dGSv07atryI/s1600/SCD40001.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/--bOeYprhANs/VLsMamCSxyI/AAAAAAAAC64/dGSv07atryI/s1600/SCD40001.JPG" height="240" width="320" /></a></div>
<br />
<br />
Either way, this was my first big bot I made and it debut at Motorama 2008 where it went 3 wins and 2 losses to Igoo and Surgical Strike.<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-0Ls9Z-0uOvc/VLsOYz-o9JI/AAAAAAAAC7E/RcpVURRZ09U/s1600/SCD40084.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-0Ls9Z-0uOvc/VLsOYz-o9JI/AAAAAAAAC7E/RcpVURRZ09U/s1600/SCD40084.JPG" height="150" width="200" /></a><a href="http://4.bp.blogspot.com/-rPO2Ee2wxjo/VLsOY7EM48I/AAAAAAAAC7I/JhAODP2qPsA/s1600/SCD40085.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-rPO2Ee2wxjo/VLsOY7EM48I/AAAAAAAAC7I/JhAODP2qPsA/s1600/SCD40085.JPG" height="150" width="200" /></a></div>
<br />
<br />
It had many notable flaws:<br />
<br />
<ul>
<li>Banebots escs overtemp shutoff from the high current draw mabuchi gearmotors</li>
<li>poor detail mechanical design and material choices allowed for bent frame and lockup</li>
<li>weight distribution made for poor inverted driving (and poor ability to self-right)</li>
<li>additional precautions to secure connectors also required</li>
</ul>
<br />
It was also the first robot I built featuring a custom made brushless-in-weapon system. I'll attribute the original idea to Corona and Skittlebaru but none have gone as far to put the esc inside. Will bales "Fluffy" came out later utilizing my old 5" drum idea having everything except the drive motors inside the drum. Lets just say there was a reason I didnt finish that version of Attrition. The things learned from this robot would carry in designs to come. Additional pictures from long long ago can be found here:<br />
<br />
<div style="text-align: center;">
<a href="http://s30.photobucket.com/user/jamisongo/library/12lber%20Attrition">http://s30.photobucket.com/user/jamisongo/library/12lber%20Attrition</a></div>
<br />
<b><span style="font-size: large;">2012-2013:</span></b><br />
By now I was in college at Georgia Tech. My activities at local events and Dragon Con had interested enough friends to justify the "Georgia Tech Fleet" to drive from Atlanta to Harrisburg for Motorama 2013. I dug Attrition out from storage and decided now was time to address its shortcomings.<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-g1FZnS47i3k/VLsUEQ34GOI/AAAAAAAAC7s/81BbcWeIjSU/s1600/Variable%2BThreat%2BResponse%2BBattlebot.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-g1FZnS47i3k/VLsUEQ34GOI/AAAAAAAAC7s/81BbcWeIjSU/s1600/Variable%2BThreat%2BResponse%2BBattlebot.JPG" height="107" width="200" /></a><a href="http://2.bp.blogspot.com/-LRtUpkjj81c/VLsT0-z--tI/AAAAAAAAC7c/W6iRNXmofko/s1600/Tofu10.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-LRtUpkjj81c/VLsT0-z--tI/AAAAAAAAC7c/W6iRNXmofko/s1600/Tofu10.JPG" height="126" width="200" /></a></div>
<br />
<br />
I started from scratch. Time to apply new knowledge on mechanical design, materials, and even 3D modeling (since by then I had my SolidWorks professional certification). We would decrease the footprint to save weight and increase the durability of outer armor. For the same goal, we would also downgrade the weapon assembly. The gearmotors would have to go; Instead I picked up four higher reduction planetary units with 'long can 400' motors attached. This new version went by many names such as <a href="http://thevariableconstant.blogspot.com/search/label/Attrition">Tofu</a> or War Machine but decided to keep it as Attrition to indicate its lineage.<br />
<br />
Let's do some planetary gearbox math:<br />
A single stage of a planetary gearbox can be calculated by:<br />
(Ring + Center)/Center:1<br />
<br />
Pinion :11 T<br />
Sun: 17 T<br />
Ring: 46 T<br />
<br />
Stage 1: (46+17)/17:1<br />
Stage 2: (46+11)/11:1<br />
<br />
Overall: 19.24:1<br />
This number was good according to my calculations should yield ~10 mph with my long can 400 motors.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-47kcO2MBfkA/VLsUrAx5XdI/AAAAAAAAC74/NHDjutc9kRM/s1600/frame%2Bcomplete.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-47kcO2MBfkA/VLsUrAx5XdI/AAAAAAAAC74/NHDjutc9kRM/s1600/frame%2Bcomplete.JPG" height="161" width="320" /></a></div>
<br />
<br />
To make everything compact, the keyword was 'integration'. I built the gearboxes into the frame rails to save space. The electronics were repackaged into a small cube to reduce wire space needed. I was able to find the perfect battery to sneak into the remaining space.<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-gHFUNtu0gYo/VLsVv_0kXDI/AAAAAAAAC8E/7JASxluDq98/s1600/20130110_144851.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-gHFUNtu0gYo/VLsVv_0kXDI/AAAAAAAAC8E/7JASxluDq98/s1600/20130110_144851.jpg" height="150" width="200" /></a><a href="http://4.bp.blogspot.com/-AndrR_gz8wg/VLsVwPs3veI/AAAAAAAAC8I/uc4peugJ_Jc/s1600/20130115_164709.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-AndrR_gz8wg/VLsVwPs3veI/AAAAAAAAC8I/uc4peugJ_Jc/s1600/20130115_164709.jpg" height="150" width="200" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-GB8W6v9IERo/VLsWaCo3TXI/AAAAAAAAC8c/mZCGIR9-ckU/s1600/20130117_185341.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-GB8W6v9IERo/VLsWaCo3TXI/AAAAAAAAC8c/mZCGIR9-ckU/s1600/20130117_185341.jpg" height="240" width="320" /></a></div>
<br />
<br />
Drive test showed the robot was fairly nimble. I dont remember if I had switched to Banebots RS395 motors yet or not. Either way this video showed that I could not use round belts like I usually favor. On high acceleration moves like direction changes, the belts would slip. This made driving with the drum impossible as I later discovered. Later i switched to waterjet machined XL timing pulleys.<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="//www.youtube.com/embed/2C0_AB3itr4?rel=0" width="560"></iframe>
<br />
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgJ3Nb0OqE66whQ7NBChDK_DnEr5R8v5CJdC-jMENFz1-WmCNt9xd3doxypp8hiWjDNVL9GtxdvF3rqahbXCGjtTIDl2kqWLPCZw2e7CBvsLYrUSIj5dfS14sfno_ghufO38MsazMAG5Ho/s1600/20130212_185851.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgJ3Nb0OqE66whQ7NBChDK_DnEr5R8v5CJdC-jMENFz1-WmCNt9xd3doxypp8hiWjDNVL9GtxdvF3rqahbXCGjtTIDl2kqWLPCZw2e7CBvsLYrUSIj5dfS14sfno_ghufO38MsazMAG5Ho/s1600/20130212_185851.jpg" height="320" width="240" /></a></div>
<br />
The drum was simple; I cut the original drum from Attrition reducing its length from 8" to 5.625". The motor was a bit more challenging. To simplify the design I kept the esc out of the drum. This was a decision made based on 'Cake's matches where the drum would break free and eat its signal or power wires. I also decided to not route wires inside the shaft. This was so I could preload the inner race bearing assemblies in the shaft for higher rigidity and high frequency performance. As such, the wires would exit with a new concept I had involving a large ring bearing on the motor side.<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-kzjjJ1xaVX8/VLsXE9TbCcI/AAAAAAAAC8s/Pp2sYZTuVHE/s1600/20130125_134503.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-kzjjJ1xaVX8/VLsXE9TbCcI/AAAAAAAAC8s/Pp2sYZTuVHE/s1600/20130125_134503.jpg" height="200" width="150" /></a><a href="http://3.bp.blogspot.com/-_iNq4wXQvrM/VLsXE2rofaI/AAAAAAAAC8k/rpws7d7dtnU/s1600/20130203_193155.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-_iNq4wXQvrM/VLsXE2rofaI/AAAAAAAAC8k/rpws7d7dtnU/s1600/20130203_193155.jpg" height="150" width="200" /></a></div>
<br />
<br />
<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="//www.youtube.com/embed/5tUhObzxVys?rel=0" width="560"></iframe>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-cPGgIfZVw3M/VLsXEwIubAI/AAAAAAAAC8o/CvCiAfQwJ7M/s1600/20130206_153530.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-cPGgIfZVw3M/VLsXEwIubAI/AAAAAAAAC8o/CvCiAfQwJ7M/s1600/20130206_153530.jpg" height="150" width="200" /></a><a href="http://4.bp.blogspot.com/-bd88bfFGksE/VLsXGsnFNXI/AAAAAAAAC88/ly3dAlzJQ3s/s1600/20130209_011941.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-bd88bfFGksE/VLsXGsnFNXI/AAAAAAAAC88/ly3dAlzJQ3s/s1600/20130209_011941.jpg" height="150" width="200" /></a></div>
<br />
<br />
The original concept was to build the internals from several stacks of waterjet material. However the drum was a bit warped so any precision machined parts would not readily fit inside. I ended up wrecking a motor in an initial test and remachined the entire assembly from a single round of aluminum. Some fully assembled pictures.<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-7kTEKrV1TqI/VLsY4l2eCpI/AAAAAAAAC9I/Ww1ugol_AoM/s1600/20130209_221449.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-7kTEKrV1TqI/VLsY4l2eCpI/AAAAAAAAC9I/Ww1ugol_AoM/s1600/20130209_221449.jpg" height="150" width="200" /></a><a href="http://4.bp.blogspot.com/-9C0G4COg0Os/VLsY4wWcUyI/AAAAAAAAC9M/KCQ5Hvg6NCQ/s1600/20130212_185908.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-9C0G4COg0Os/VLsY4wWcUyI/AAAAAAAAC9M/KCQ5Hvg6NCQ/s1600/20130212_185908.jpg" height="150" width="200" /></a></div>
<br />
Now, time for the money shots! The LED vag was a nice touch too...<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-rOWsonBjQCY/VLsZKUS9QhI/AAAAAAAAC9g/SeFP_oPLhjM/s1600/20130205_182653.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-rOWsonBjQCY/VLsZKUS9QhI/AAAAAAAAC9g/SeFP_oPLhjM/s1600/20130205_182653.jpg" height="150" width="200" /></a><a href="http://2.bp.blogspot.com/-ub-I2wYT7zA/VLsZJAwkpTI/AAAAAAAAC9Y/k4DzEkIEuNM/s1600/20130209_224600.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-ub-I2wYT7zA/VLsZJAwkpTI/AAAAAAAAC9Y/k4DzEkIEuNM/s1600/20130209_224600.jpg" height="150" width="200" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-2MadZL2z_mk/VLsZKfOj2dI/AAAAAAAAC9k/OsgFwkBFmIk/s1600/20130212_185825.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-2MadZL2z_mk/VLsZKfOj2dI/AAAAAAAAC9k/OsgFwkBFmIk/s1600/20130212_185825.jpg" height="300" width="400" /></a></div>
<br />
This version debut at Motorama 2013 where it faced a number of tough opponents including Zandor and the undefeated multi-time champion Cataclysm who won 2nd and 1st respectively. Attrition went 3 wins and 2 losses for 3rd place, going undefeated for 3 matches until he met Cataclysm on Sunday.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-DipBqGVjqz4/VLsbbPsD-XI/AAAAAAAAC98/KBGKX3VdFRk/s1600/20130217_144935.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-DipBqGVjqz4/VLsbbPsD-XI/AAAAAAAAC98/KBGKX3VdFRk/s1600/20130217_144935.jpg" height="240" width="320" /></a></div>
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-QbUnyXDrOuo/VLsevsYJwnI/AAAAAAAAC-o/zSFCSUKQBI4/s1600/2sbx2yu.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-QbUnyXDrOuo/VLsevsYJwnI/AAAAAAAAC-o/zSFCSUKQBI4/s1600/2sbx2yu.jpg" height="320" width="240" /></a></div>
<br />
<br />
Somehow, Attrition came out in good shape. Aside from blemishes on the top and bottom plates, the majority components including the drum were fully operational. The source of my demise was actually lack of spares. After my match with Zandor in the quarter-finals, I was down one drive motor and went into the Semi-finals against cataclysm with only one drive side. This put me at a huge disadvantage and lost decisively. Shortly after, I lost the losers bracket finals to Zandor because of my lack of drive side. Originally the culprit was a broken magnet. The replacement given by another builder ended up failing also because of pinion slip.<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-xBbQJwZpRao/VLsb3bdM2OI/AAAAAAAAC-I/kadi0XLqRQ8/s1600/20130222_215115.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-xBbQJwZpRao/VLsb3bdM2OI/AAAAAAAAC-I/kadi0XLqRQ8/s1600/20130222_215115.jpg" height="320" width="240" /></a><a href="http://2.bp.blogspot.com/-VoCF0E5Vx4A/VLsb3d7tovI/AAAAAAAAC-E/5effky7_LYU/s1600/20130222_215134.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-VoCF0E5Vx4A/VLsb3d7tovI/AAAAAAAAC-E/5effky7_LYU/s1600/20130222_215134.jpg" height="320" width="240" /></a></div>
<br />
<br />
<b><span style="font-size: large;">2013-2014</span></b><br />
Losses at Motorama 2013 were disappointing to say the least. This year's emphasis would be into the drivetrain. I wanted faster and more reliable. Now at MIT, I lost a valuable resource at the Georgia Tech Invention Studio. However my research afforded me new capabilities I would try and leverage when possible. In addition to remaking many outer armor plates, I also swapped the Banebots RS395 motors for the original long can 400 motors and remade the center timing pulleys from 3D printed material. I believed that high starting torque was the culprit for pinion slipping.<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-19EdurBKBIU/VLseTVwdAGI/AAAAAAAAC-c/C91PhCazx-Y/s1600/20140117_204442.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-19EdurBKBIU/VLseTVwdAGI/AAAAAAAAC-c/C91PhCazx-Y/s1600/20140117_204442.jpg" height="150" width="200" /></a><a href="http://1.bp.blogspot.com/-sXYcSo4xY5s/VLseTYdQR6I/AAAAAAAAC-Y/HvoZPIo2DqY/s1600/20140117_204448.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-sXYcSo4xY5s/VLseTYdQR6I/AAAAAAAAC-Y/HvoZPIo2DqY/s1600/20140117_204448.jpg" height="150" width="200" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-V8AEAFhpTYY/VLsgkXqojmI/AAAAAAAAC_U/DF0OQ2N0U8k/s1600/20140124_132401.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-V8AEAFhpTYY/VLsgkXqojmI/AAAAAAAAC_U/DF0OQ2N0U8k/s1600/20140124_132401.jpg" height="150" width="200" /></a><a href="http://1.bp.blogspot.com/-dkaX4g_U-9U/VLsgkf4yPuI/AAAAAAAAC_Y/7ZA8ckmDlUU/s1600/20140125_170345.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-dkaX4g_U-9U/VLsgkf4yPuI/AAAAAAAAC_Y/7ZA8ckmDlUU/s1600/20140125_170345.jpg" height="200" width="150" /></a></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Another decal with lewd LED placement was needed.</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-1M-me--XrdA/VLshFmJg2HI/AAAAAAAAC_k/6mBlo0KjQDg/s1600/20140122_192636.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-1M-me--XrdA/VLshFmJg2HI/AAAAAAAAC_k/6mBlo0KjQDg/s1600/20140122_192636.jpg" height="240" width="320" /></a></div>
<br />
<br />
As fate would have it, I was wrong. At Motorama 2014, Attrition went 3 wins and 1 loss in a round robin format for 2nd place. Agility was useful in my first match against the pneumatic flipper Jumbonator but I lost a drive side again after a win on Upchuck. This was a fatal blow against the strong drive of Isotelus Rex as I could not maneuver for a good hit. The FDM material actually split and rendered the center pulley useless. This was from the high stress concentrations near the 6mm drive shaft to the ~25mm center pulley. This could easily be fixed with a larger diameter intermediate made of metal.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-rlxEpPCiRWg/VLsgHsjJbsI/AAAAAAAAC-0/mLiNOJuYgW0/s1600/20140222_224719.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-rlxEpPCiRWg/VLsgHsjJbsI/AAAAAAAAC-0/mLiNOJuYgW0/s1600/20140222_224719.jpg" height="150" width="200" /></a><a href="http://3.bp.blogspot.com/-ONTWxxzolyE/VLsgIG_3g4I/AAAAAAAAC-8/Q8o6bk4vplk/s1600/20140222_224838.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-ONTWxxzolyE/VLsgIG_3g4I/AAAAAAAAC-8/Q8o6bk4vplk/s1600/20140222_224838.jpg" height="150" width="200" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/--wC45J0a8Js/VLsgIAuawEI/AAAAAAAAC_A/JkWaCv5POwA/s1600/20140222_224933.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/--wC45J0a8Js/VLsgIAuawEI/AAAAAAAAC_A/JkWaCv5POwA/s1600/20140222_224933.jpg" height="240" width="320" /></a></div>
<br />
<br />
However, another defect surfaced that I had not predicted. The A2 teeth, after years of battle, finally broke during the match against Isotelus. I suspect this was due to fatigue as nothing on Isotelus could have done that. However I note that points were given to him for 'damage' to my robot as the judges pointed out when Attrition had finally spun down after the match. Closer inspection of the welds show little to no penetration into the wall; it was no wonder they had broken.<br />
<br />
<b><span style="font-size: large;">Present Day:</span></b><br />
No place in 2008. 3rd place in 2013. 2nd place in 2014. This year we pull out all the stops. At Motorama 2015 we will go for the prize!<br />
<br />
I here conclude this post as a documentation of my first 12-pound combat robot. In another post, I will summarize the efforts to prepare Attrition for Motorama this year which includes professionally made drums and extensive drive modifications.<br />
<br />
Video of all Attrition's matches can be found as a playlist on my Youtube. I have placed the direct link below.<br />
<br />
<div style="text-align: center;">
<a href="http://www.youtube.com/playlist?list=PLautSlltfiO-6T951tLZSQLcOT_P6lDob">http://www.youtube.com/playlist?list=PLautSlltfiO-6T951tLZSQLcOT_P6lDob</a></div>
Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com44tag:blogger.com,1999:blog-1588984194759318117.post-18394080451508674732014-09-05T03:12:00.001-04:002014-09-05T03:13:03.331-04:00Bug Love Robot: MegatRON for Dragon ConI sense a change in the winds! Seriously, its getting cooler. That means Summer is ending but more importantly signaling the arrival of Dragon Con, my annual pilgrimage to Atlanta, GA to visit friends and fight robots at the <a href="http://robotbattles.com/">Robot Battles and MicroBattles Contests.</a> Last year I brought DDT and Dead Meat (formerly Turboencabulator) but with Dead Meat, well, dead I needed another entrant to take over the main event. Luckily I had built a mega version of my original beetleweight, Ron, and could think of many ways to make him worthy of the stage.<br />
_________________________________________________________________________________<br />
<br />
<b>After Motorama</b><br />
MegatRON was pretty sad offensively after Moto. In its fight vs Shaka, the dustpan was wrecked. Although Adam helped reweld the pan for the rumble, the pan was once again split open by Hyperactive and <ray bot="" s="">. To make matter's worse the saw arm motor smoked when I was using it as a hammer. It had a pretty sad ride back home next to the nearly victorious Uberclocker. Maybe some of that luck will rub off on it next time?</ray><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-vCl8iyRm4sY/VAlZ7m2-SYI/AAAAAAAACzg/-mSjfu67zeo/s1600/1602065_10152223373323928_1393754457_o.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-vCl8iyRm4sY/VAlZ7m2-SYI/AAAAAAAACzg/-mSjfu67zeo/s1600/1602065_10152223373323928_1393754457_o.jpg" height="240" width="320" /></a></div>
<br />
<br />
Uh... a bit more than rub off.<br />
_________________________________________________________________________________<br />
<br />
<b>The Love Robot</b><br />
To satisfy the rules of Robot Battles, the robot had a tip speed limit for all spinning weapons. This meant that the saw cutter could no longer be used with its current configuration. Instead I opted for a lifter and clamper mechanism similar to that of <a href="http://www.etotheipiplusone.net/?cat=101">Uberclocker</a> but utilizing the same hardpoints on MegatRON and general dustpan shape. After a first-pass concept, I flushed out the below design:<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-fWMr7zN_-1Y/VAlaRcYPiWI/AAAAAAAACzw/xednHkmPIDg/s1600/Megatron%2BDC%2B2.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-fWMr7zN_-1Y/VAlaRcYPiWI/AAAAAAAACzw/xednHkmPIDg/s1600/Megatron%2BDC%2B2.JPG" height="183" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-Dk7jdVDAZNA/VAlaIF1d_PI/AAAAAAAACzo/7r92FbBHVk8/s1600/Megatron%2BDC%2B1.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-Dk7jdVDAZNA/VAlaIF1d_PI/AAAAAAAACzo/7r92FbBHVk8/s1600/Megatron%2BDC%2B1.JPG" height="182" width="320" /></a></div>
<br />
Looks too much like Uberclocker to me although the components are different. This design uses dual <a href="http://banebots.com/pc/P60K-S5/P60K-555-0004">Banebots P60 132:1 gearmotors with RS550 motors</a>. At ~10 inches from the pivot point, this configuration should have tons of lifting torque at the tip and more than enough speed to boot.<br />
<br />
Additionally, I was feeling extremely lazy at the time. Not only was I taking courses and doing research but I had an industry short course of my own to teach and a conference the following weeks that needed a poster that I had not made yet. In short, I was strapped for time. If I didnt have the gearmotors on hand for the project, It couldnt be done.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-mVeM04ax8cA/VAlbLpJ773I/AAAAAAAACz4/ku4ktDvP8Mw/s1600/Megatron%2BDC%2B7.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-mVeM04ax8cA/VAlbLpJ773I/AAAAAAAACz4/ku4ktDvP8Mw/s1600/Megatron%2BDC%2B7.JPG" height="186" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-JCrcgnKpvmk/VAlbOjFhUrI/AAAAAAAAC0A/kh1vIuol8Xc/s1600/Megatron%2BDC%2B8.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-JCrcgnKpvmk/VAlbOjFhUrI/AAAAAAAAC0A/kh1vIuol8Xc/s1600/Megatron%2BDC%2B8.JPG" height="186" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
This design turned out to be more feasible. Say, what is that beastly box object tied to the main lift pan?<br />
<br />
It is a <a href="http://www.troybuiltmodels.com/items/PS050.html">Tonegawa PS-050 super ultra mega cray servo</a>! I found this sifting through old FIRST and decided to give it new life. This guy would make the top clamp arm at over 1200 oz-in of torque!<br />
<br />
However, the servo has plastic gears which are still concern for stripping, especially in this high torque application where backdriving is a possibility. Similar to the lifting pan, I will integrate a slip clutch to relieve the servo under torque but also use spring steel strips as the gripper mechanism. My hope is that the flexibility of the steel is enough compliance to prevent damage to the servo.<br />
<br />
The real challenge was converting the servo horn into a more useful medium. I had two options. The first involved milling a relief into the face of a shaft to match the servo horn geometry such that the horn could essentially sit in the relief and transfer torque by twisting against its features. The second option involved modifying the horn to essentially emulate these <a href="https://www.servocity.com/html/servo_shaft_attachment___500__.html#.VAlhw_ldXTo">servo spine shafts from Servo City</a>. I decided towards the latter for ease of support. Below, I describe the steps I used to create the part.<br />
<br />
First I turned the horn into a round. No particular diameter, but the more nylon meat the better.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-O7VzAoWt8wE/VAlbt3eL4UI/AAAAAAAAC0I/ldfaUilsKhc/s1600/20140819_190205.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-O7VzAoWt8wE/VAlbt3eL4UI/AAAAAAAAC0I/ldfaUilsKhc/s1600/20140819_190205.jpg" height="240" width="320" /></a></div>
<br />
<br />
Next I counterbored both ends of the ceramic-coated aluminum shafting. One end should press fit the nylon servo spline but the other end diameter mattered less since that feature is only meant to pass the head of the servo horn screw. In this case, I needed a through diameter for the head of an M4 screw.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-yxFAM0ivpO8/VAlbyCxts5I/AAAAAAAAC0Q/ngeDUcXfihA/s1600/20140819_190312.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-yxFAM0ivpO8/VAlbyCxts5I/AAAAAAAAC0Q/ngeDUcXfihA/s1600/20140819_190312.jpg" height="240" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-WgpXqrqcXMc/VAlb5F1f7CI/AAAAAAAAC0Y/kTQYxHPWdMY/s1600/20140819_193218.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-WgpXqrqcXMc/VAlb5F1f7CI/AAAAAAAAC0Y/kTQYxHPWdMY/s1600/20140819_193218.jpg" height="320" width="240" /></a></div>
<br />
<br />
I pressed them together and drilled a #2 radial set screw for good measure. I could now assemble the servo shaft assembly.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-goMCVyq30iM/VAlcGRXAIJI/AAAAAAAAC0k/vFuFW6YDX-8/s1600/20140820_193304.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-goMCVyq30iM/VAlcGRXAIJI/AAAAAAAAC0k/vFuFW6YDX-8/s1600/20140820_193304.jpg" height="192" width="320" /></a></div>
<br />
After machining a few thousand standoffs, the weapon comes together with some long tie rods.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-mb1vyUJo_f4/VAlcGQ-2nkI/AAAAAAAAC0g/bu4oze_9upA/s1600/20140820_193317.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-mb1vyUJo_f4/VAlcGQ-2nkI/AAAAAAAAC0g/bu4oze_9upA/s1600/20140820_193317.jpg" height="192" width="320" /></a></div>
<br />
The top clamp servo is also mounted with standoffs. Now I can add the clamp clutch and clamp arm!<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-pzw41TlRar0/VAlcWTv21gI/AAAAAAAAC0w/wv65N91V7j0/s1600/20140820_204923.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-pzw41TlRar0/VAlcWTv21gI/AAAAAAAAC0w/wv65N91V7j0/s1600/20140820_204923.jpg" height="192" width="320" /></a></div>
<br />
<br />
Pretend-o-bot! Looking good so far!<br />
<br />
Very little would change with regards to electronics. I removed one of the 85A bot bitz escs since a single esc could power both lifter motors. To connect them together I utilized what I call the "shotgun connector".<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-bCdSt9RKm64/VAlciNJ90VI/AAAAAAAAC1I/_yJK70txEkI/s1600/20140821_172859.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-bCdSt9RKm64/VAlciNJ90VI/AAAAAAAAC1I/_yJK70txEkI/s1600/20140821_172859.jpg" height="192" width="320" /></a></div>
<br />
<br />
I mean a double barrel bullet connector could be a shotgun right? Id love to see someone scale this into a six-shooter or something...<br />
<br />
The servo is beastly enough that it would need far greater current than the 500mA or so from the ESC BEC. However, with a 12V max limit, I would need a method of stepping down the main battery voltage. Luckily, Charles had experiemented with DC-DC converters for <a href="http://www.etotheipiplusone.net/?cat=110">herpy nano bike</a>. He simply used a BEC and changed the feedback resistor. This tricks the converter into supplying higher voltage but at the expense of current.<br />
<br />
After those changes it was time for a test! Seems to pass.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-I435ZHYdHaA/VAldtdTCpqI/AAAAAAAAC1Q/ZqWNBcQIec8/s1600/20140821_222313.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-I435ZHYdHaA/VAldtdTCpqI/AAAAAAAAC1Q/ZqWNBcQIec8/s1600/20140821_222313.jpg" height="192" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-CfpUuJfIrvw/VAldtYhoM8I/AAAAAAAAC1U/sCNG02xtFX4/s1600/20140821_222320.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-CfpUuJfIrvw/VAldtYhoM8I/AAAAAAAAC1U/sCNG02xtFX4/s1600/20140821_222320.jpg" height="192" width="320" /></a></div>
<br />
<br />
The robot wheelies very hard on accelerating which makes scooping robots or object very difficult. However should it happen the pan turns out to be incredibly quick! It is a standalone flipper!<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-6p7TgFY9hcc/VAld9uMlztI/AAAAAAAAC1g/t0j0v39AUsg/s1600/20140822_005259.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-6p7TgFY9hcc/VAld9uMlztI/AAAAAAAAC1g/t0j0v39AUsg/s1600/20140822_005259.jpg" height="192" width="320" /></a></div>
<br />
<br />
Later that evening, Charles finished up his modifications to Uberclocker so we decided to spar.<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="360" src="//www.youtube.com/embed/yJnn-g0kVPg" width="640"></iframe>
<br />
<br />
From the video, you can easily see how detrimental the wheelies are. Most times, I jump right into his grabber. However, should I keep mobile the robot is still very maneuverable and has lots of flipping potential.<br />
<br />
Aside from the expected scuffs, the robot took no damage and performed as expected. From this point on, I decided to tidy up the wiring and take the finish shots.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-LaMucqB4NW0/VAlfO_KsBvI/AAAAAAAAC1o/fLU8VPH8H-U/s1600/20140821_235731.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-LaMucqB4NW0/VAlfO_KsBvI/AAAAAAAAC1o/fLU8VPH8H-U/s1600/20140821_235731.jpg" height="192" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-CJkabldq5xU/VAlfPKFr_iI/AAAAAAAAC1w/fHlzFiySbM4/s1600/20140821_235744.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-CJkabldq5xU/VAlfPKFr_iI/AAAAAAAAC1w/fHlzFiySbM4/s1600/20140821_235744.jpg" height="192" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-G0onFnNXD7E/VAlfPGDhtAI/AAAAAAAAC1s/9oaQE3KiW_E/s1600/20140821_235818.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-G0onFnNXD7E/VAlfPGDhtAI/AAAAAAAAC1s/9oaQE3KiW_E/s1600/20140821_235818.jpg" height="192" width="320" /></a></div>
<br />
<br />
And this concludes the build report for.... what am I naming this thing again!?<br />
<br />
Charles and I agreed the robot looked like a bug, with the red grippers being eyes or the spring steel strips being antennae. This immediately turned towards one of our favorite inside jokes, "bug love tree". This phrase was uttered by a professor during a robotics competition using broken English and has been cherished by us ever since only to rival that of "control systems potato". Change tree into robot and ship it. "Bug Love Robot", perfect.<br />
<br />
How much love with Bug Love Robot give at Dragon Con? Read the event report to find out!Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com5tag:blogger.com,1999:blog-1588984194759318117.post-53101477295384373802014-04-18T03:55:00.001-04:002015-02-17T00:49:51.100-05:00Debonair Jayce Cosplay v2: Transformation CompleteLast post I detailed the build for my Debonair Jayce Mercury Hammer prop. It was intended to do awesome things like transform and light up but failed because of my cheapness in design. Since Anime Boston, I've beasted through a tough 3 weeks (and $$$) to bring version 2 of the Mercury Weapon to Pax East 2014!<br />
<br />
<h3>
<b>What Didn't Work: In a Nutshell</b></h3>
<ul>
<li><b>Dual purpose motors:</b> I was being stingy with my spending and tried to make a component ill suited for the application work in my design. The double purpose motors were an interesting idea that should have saved weight and space but there are better alternatives.</li>
<li><b>Heavy metal \m/ (and other materials):</b> I used materials that were free for me (1/4" 6061 aircraft grade aluminum for example) but absolutely overkill for a prop. They were durable sure, but EXTREMELY heavy compared to the pinkfoam standard of most props.</li>
<li><b>Color Scheme:</b> The ivory was just a bad idea. Without a good primer behind it (plus recoating over old colors) essentially made it look like an old Macintosh computer. The static colors of yellow-gold placed adjacent were a nice barf color, esp when juxtaposed with the ivory. </li>
</ul>
<div>
<h3>
<b>What Will Change: Minor Modifications</b></h3>
</div>
<div>
<ol>
<li><b>Functional Mechanics:</b> This means subdividing the mechanics to more "comfortable" technology, even if it costs me a bit more. This meaning I'll default to RC servos for the wings and try to make a screw-based mechanism for the rods.</li>
<li><b>Actually Integrate Electronics:</b> The previous version did not require an microcontroller because it was all DC driven at main voltage with clutches to compensate for physical stops. This version uses servos which input a waveform with particular properties. I would need a microcontroller or at least a 555 timer circuit for this. Although I am aware I could achieve this using passive components and a 555, I enjoy the visual interface of the MCU IDE and ease of change. The latter will be particularly useful for debugging values later (LED color, servo position, etc).</li>
<li><b>Change of Materials</b>: If it can be helped, all metal parts will be changed to high impact and tensile strength plastics. This should provide high strength at less weight and more color options! I would also like to try using this very popular pinkfoam that friends like Pizoobie use.</li>
<li><b>Change of Dimensions</b>: A second look at the hammer revealed to me that some of the proportions were off. I will attempt to remedy those effects when I update my components and functions</li>
<li><b>Change in Color Palette:</b> Although I still understand the weapon is majority silver/chrome, I still feel that the majority light with chrome detailing better suits the cloth aspect. Think of the weapon as a reflection of the user. With that said, I am only planning on simplifying the colors. Flat white (glossy or matte IDK) with chrome detailing. If you follow the skin in-game, the silver parts will be white, and the gold parts will be chrome. I will use LEDs this time for the areas that actually change between forms.</li>
</ol>
<div>
<h3>
<b>The Rebuild</b></h3>
<br />
Few hours with the SolidWorks models and the hammer was born.<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-7z7djIPMmoo/U04qg37xsnI/AAAAAAAAChA/jkX9GZdi9p0/s1600/hammer+min.png" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" src="http://3.bp.blogspot.com/-7z7djIPMmoo/U04qg37xsnI/AAAAAAAAChA/jkX9GZdi9p0/s1600/hammer+min.png" height="320" width="158" /></a><a href="http://2.bp.blogspot.com/-WYFiSFzrsDg/U04qgNrBVLI/AAAAAAAACg0/foGJxOylo-8/s1600/cannon+min.png" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-WYFiSFzrsDg/U04qgNrBVLI/AAAAAAAACg0/foGJxOylo-8/s1600/cannon+min.png" height="320" width="193" /></a></div>
<br />
<br />
<div class="separator" style="clear: both; text-align: left;">
The first thing I really did was think of ways to reduce the size of 3D printed parts. In a sense it is cheating with sculpting but the properties of honeycomb ABS are perfect for my goals. Still, I wanted to handle some of the load on my printers instead of just the IDC Dimension 1200es so I split the parts into sections that minimized supporting material.</div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-zPDfZn445oc/U04qhrlDQ1I/AAAAAAAAChM/9dAKaqCpSLY/s1600/hammer+cut+thru.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-zPDfZn445oc/U04qhrlDQ1I/AAAAAAAAChM/9dAKaqCpSLY/s1600/hammer+cut+thru.JPG" height="187" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
The cut model shows a lot of the new magic inside the device. Instead of having a huge metal ovular plate, I split that section into halves. A skeleton frame of delrin plastic supports these floating panels and gives the appearance of a full volume. </div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
The purple rectangles are Turnigy brand RC servos. These will drive a 4-bar mechanism that translates and rotates the wings outward. The pictures below elaborate on the new motion. The T-shaped bar is the piece where the wings will mount. The T shape in particular is to distribute the mounting points so it is more stable.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-K3UyaabyFGs/U04xYt6nPkI/AAAAAAAAChg/Xjk--2g2vpc/s1600/four+bar.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-K3UyaabyFGs/U04xYt6nPkI/AAAAAAAAChg/Xjk--2g2vpc/s1600/four+bar.JPG" height="187" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhUoV_efr9j7BDsicikS_J7Bj43ughjc6P3-rTabIHHykr8HuYbh0bqXy2OUZhV4-T48h2Gg4CMs8eFZ48QfhFdO1kNGtMXKYC1Vj56N-DbaKRGYyxQBt06UWeuXvnWebEDaN6vqdknRuM/s1600/four+bar+2.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhUoV_efr9j7BDsicikS_J7Bj43ughjc6P3-rTabIHHykr8HuYbh0bqXy2OUZhV4-T48h2Gg4CMs8eFZ48QfhFdO1kNGtMXKYC1Vj56N-DbaKRGYyxQBt06UWeuXvnWebEDaN6vqdknRuM/s1600/four+bar+2.JPG" height="187" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="" style="clear: both; text-align: left;">
This is far more accurate than the single point rotation of the previous design. Furthermore, the 4 bar contains singularities which help reduce the constant loading on the servos. This will aid in their ability to hold position, a huge problem that plagued the first version.</div>
<div class="" style="clear: both; text-align: left;">
<br /></div>
<div class="" style="clear: both; text-align: left;">
What are those four cylindrical things? Glad you asked! I originally wanted to attempt a nested lead screw concept to extend the rods but I soon realized it was not feasible when I tried to design it. The second alternative are pneumatic cylinders. These provide quick response articulation of high volume linear motion in a compact initial configuration. Since nobody sells 2-stage air cylinders, I had to design them myself.<br />
<br /></div>
<div class="" style="clear: both; text-align: left;">
<div class="separator" style="clear: both; text-align: center;">
<a href="https://1.bp.blogspot.com/-NDZ54LAPIFA/U05Iopyai-I/AAAAAAAACh0/I7pDBPTTwK8/s1600/pneu+comp.png" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-NDZ54LAPIFA/U05Iopyai-I/AAAAAAAACh0/I7pDBPTTwK8/s1600/pneu+comp.png" height="320" width="199" /></a><a href="http://4.bp.blogspot.com/-_jllYZMnBM4/U05IvQvmyhI/AAAAAAAACh8/nFirfbxMog4/s1600/pneu+ext.png" imageanchor="1" style="clear: right; display: inline !important; margin-bottom: 1em; margin-left: 1em;"><img border="0" src="http://4.bp.blogspot.com/-_jllYZMnBM4/U05IvQvmyhI/AAAAAAAACh8/nFirfbxMog4/s1600/pneu+ext.png" height="320" width="207" /></a></div>
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-NDZ54LAPIFA/U05Iopyai-I/AAAAAAAACh0/I7pDBPTTwK8/s1600/pneu+comp.png" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><br /></a><a href="http://1.bp.blogspot.com/-NDZ54LAPIFA/U05Iopyai-I/AAAAAAAACh0/I7pDBPTTwK8/s1600/pneu+comp.png" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><br /></a></div>
<div class="separator" style="clear: both; text-align: left;">
Air will enter through the bottom and fill the chambers composed of 3D printed endcaps and polycarbonate tubing. When pressure is released, an internal spring will retract the pistons. This is how I expected them to operate anyway. </div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
If you have pneumatics, you need to have air storage. Luckily, since I decided to move the batteries up to the hammer end, the bulb was now vacant. I stored a series air tank in the bulb and length of handle and left ports top and bottom to be filled and allow passage of compressed air.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-es9qSHDBLMY/U05KID-k6xI/AAAAAAAACiI/LYruqYfzayo/s1600/hammer+cut+thru+lower.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-es9qSHDBLMY/U05KID-k6xI/AAAAAAAACiI/LYruqYfzayo/s1600/hammer+cut+thru+lower.JPG" height="187" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Then the construction started. By this point in time, it was the week before Anime Boston. Could I finish it? There was only one way to find out! While I had the 3D printers running, I had the white polycarb and delrin waterjet cut at the MIT Hobby Shop.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-HghNNL7mdxA/U05K1Ld_FDI/AAAAAAAACiQ/qPxYQEJ73YQ/s1600/20140315_155547.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" src="http://1.bp.blogspot.com/-HghNNL7mdxA/U05K1Ld_FDI/AAAAAAAACiQ/qPxYQEJ73YQ/s1600/20140315_155547.jpg" height="240" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Fresh prints of MIT. Three of these actually failed because I ran out of material qq.</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-zK3czy1-BMw/U05K1MMtXJI/AAAAAAAACiU/vFVliTUFk50/s1600/20140315_225034.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" src="http://1.bp.blogspot.com/-zK3czy1-BMw/U05K1MMtXJI/AAAAAAAACiU/vFVliTUFk50/s1600/20140315_225034.jpg" height="240" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Stratasys ABS P430 works in the Up Mini's! Slightly different color but much better mechanical properties.</td></tr>
</tbody></table>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
The adjoining pod paneling were held together securely using a T-nut strip idea. No locating holes! just bore, tap, and arbor press!</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-9z92SqANmD0/U05L9TAvo_I/AAAAAAAACik/lfCm-vhSdKw/s1600/20140326_193157.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-9z92SqANmD0/U05L9TAvo_I/AAAAAAAACik/lfCm-vhSdKw/s1600/20140326_193157.jpg" height="240" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Began assembling the oval structure in the center. Note how the ovals are cut in half. This eases assembly, servicing, and makes material conservation more effective. Also, that chrome!</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-ZoAWhkKN0t4/U05MW_GCpDI/AAAAAAAACiw/dzb26axvWq4/s1600/20140326_193202.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-ZoAWhkKN0t4/U05MW_GCpDI/AAAAAAAACiw/dzb26axvWq4/s1600/20140326_193202.jpg" height="240" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Spray painted over the 3D printed ABS. Despite sanding, the striations are still very visible. At this point, I hadn't learned how important primers were yet. I opted for another coat to attempt a reflective chrome finish.</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-hgodt8wliIA/U05MXAO8PQI/AAAAAAAACi4/AjCVDqlaN-w/s1600/20140326_193209.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-hgodt8wliIA/U05MXAO8PQI/AAAAAAAACi4/AjCVDqlaN-w/s1600/20140326_193209.jpg" height="240" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
The bulb also suffered from that effect. Hilariously enough, I applied primer after the silver coat to get a clean flat white. I should have primed the entire structure, then detailed with the chrome. This probably would have helped with the paint bleed I experienced as the dripping paint follows the 3D printed layers like channels.</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-FK74oDU7gEs/U05MWqisS7I/AAAAAAAACis/DiO1tYICpMY/s1600/20140326_193213.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-FK74oDU7gEs/U05MWqisS7I/AAAAAAAACis/DiO1tYICpMY/s1600/20140326_193213.jpg" height="240" width="320" /></a></div>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/-OQwRThpvOUg/U05McuOV6zI/AAAAAAAACjE/CJSsQnZXFTA/s1600/20140326_193217.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" src="http://4.bp.blogspot.com/-OQwRThpvOUg/U05McuOV6zI/AAAAAAAACjE/CJSsQnZXFTA/s1600/20140326_193217.jpg" height="240" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">The chrome looks like wrought metal doesnt it? Actually kind of cool if I was trying to get that effect.</td></tr>
</tbody></table>
Now we get mechanical! Here is the compound air tank that will be storing my pressured air system. Its not a lot of volume, but I should be able to get one or two pops off for a good show.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-t9C4bwbh23Q/U05MdH8YVLI/AAAAAAAACjQ/XIIXcHFiYWw/s1600/20140327_194356.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-t9C4bwbh23Q/U05MdH8YVLI/AAAAAAAACjQ/XIIXcHFiYWw/s1600/20140327_194356.jpg" height="240" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
This tank seats into the bulb like so. The mast goes over the longer storage tank.</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-VzkZfYiC22U/U05MdBAJasI/AAAAAAAACjI/iZlQoHGulgs/s1600/20140327_203817.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-VzkZfYiC22U/U05MdBAJasI/AAAAAAAACjI/iZlQoHGulgs/s1600/20140327_203817.jpg" height="240" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Now we turn to to the wings. Cutting huge sections of double layer pink foam on the hot wire cutter...</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/--8nBVP5gb5Q/U08AGCNeVeI/AAAAAAAACjk/czn8jXEu0K4/s1600/20140327_225349.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/--8nBVP5gb5Q/U08AGCNeVeI/AAAAAAAACjk/czn8jXEu0K4/s1600/20140327_225349.jpg" height="320" width="240" /></a></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
... I can then hot glue to the table of the shop bot. What is a shop bot? An enormous CNC router! See the video below.</div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<iframe allowfullscreen="" frameborder="0" height="360" src="//www.youtube.com/embed/q8mLwVSEvr4?rel=0" width="480"></iframe>
<br />
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
We end up with this.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-4XYz-sJMRmM/U08NAUyAjII/AAAAAAAACkA/iMLdpBIwunE/s1600/20140328_171445.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-4XYz-sJMRmM/U08NAUyAjII/AAAAAAAACkA/iMLdpBIwunE/s1600/20140328_171445.jpg" height="240" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
And then this!</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-tkZvVZZQu_I/U08B3fhC99I/AAAAAAAACjw/y41GqdGv5V0/s1600/20140328_195922.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-tkZvVZZQu_I/U08B3fhC99I/AAAAAAAACjw/y41GqdGv5V0/s1600/20140328_195922.jpg" height="240" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Because I was using a 1/2" ball endmill, there are some pretty heavy mill marks on the surface. Luckily, pinkfoam takes very well to sanding. I used an 80 grit sanding sponge to clean up the surfaces.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Experimental coating idea! My buddy Charles Guan made too much microballoon epoxy, so we slathered some generously over a spare block of foam. The result was a perfectly smooth hardcoat! Takes well to painting too! Below is a single coat of chrome.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-Fd2mos8zicE/U08Nsx12yAI/AAAAAAAACkI/mDT-kqHq9W8/s1600/20140406_231507.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-Fd2mos8zicE/U08Nsx12yAI/AAAAAAAACkI/mDT-kqHq9W8/s1600/20140406_231507.jpg" height="240" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
It was so good, I applied it to my final pieces as well.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-jQBkjslkPb4/U08XfgUlnMI/AAAAAAAACkY/qKKwf4Uydnw/s1600/20140406_231405.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-jQBkjslkPb4/U08XfgUlnMI/AAAAAAAACkY/qKKwf4Uydnw/s1600/20140406_231405.jpg" height="240" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
While that dried, I turned my attention to the electronics. I build a simple test circuit using a solderless breadboard, an arduino nano, one section of RBG LEDs, a limit switch, etc.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-fNUtVMS3mt8/U08X5n6D3UI/AAAAAAAACkg/ZbY-0R-GIX4/s1600/20140402_200744.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-fNUtVMS3mt8/U08X5n6D3UI/AAAAAAAACkg/ZbY-0R-GIX4/s1600/20140402_200744.jpg" height="240" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Since I was expecting using ~12v for the LEDs, I knew I would have to stepdown the voltage for the servos. A Turnigy voltage regulator drops the voltage to 6V instead of 12V. Test video below!</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<iframe allowfullscreen="" frameborder="0" height="315" src="//www.youtube.com/embed/gj8Hg0yhetU?rel=0" width="560"></iframe>
<br />
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Once it proved to work, I moved it onto a solderboard. To be honest, leaving it on a solderless breadboard would have been more convenient. However, I see some potential in making cosplay electronics boards. hmmmm.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-GFviWZkr65s/U08aJwCY6cI/AAAAAAAACks/-BeHc7awJrU/s1600/20140403_012502.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-GFviWZkr65s/U08aJwCY6cI/AAAAAAAACks/-BeHc7awJrU/s1600/20140403_012502.jpg" height="240" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
The board accepts seven inputs of RGB LED strips, and four servo inputs. To trigger transformation, it reads a digital input (like a switch).</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-LlRtt6eTxac/U08aJ-LFQEI/AAAAAAAACkw/nNl4cfZbpA0/s1600/20140403_154425.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-LlRtt6eTxac/U08aJ-LFQEI/AAAAAAAACkw/nNl4cfZbpA0/s1600/20140403_154425.jpg" height="320" width="240" /></a></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
Next soldering LEDs! If you were ever curious, you could actually achieve a variety of colors just by changing the voltage; you dont need to buy the LED strips with the controller. <a href="https://www.dropbox.com/s/h29riw4usxaot9m/RGBL-Guide.pdf">See this PDF for the details! </a>Luckily, since I only needed yellow and cyan, I just needed to change which pins received full voltage.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-4EDlefOMpEk/U08bS2WWGHI/AAAAAAAAClA/mbfAsXB5RU0/s1600/20140405_201733.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-4EDlefOMpEk/U08bS2WWGHI/AAAAAAAAClA/mbfAsXB5RU0/s1600/20140405_201733.jpg" height="240" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-S0Waz1KbVk8/U08bS4aTKhI/AAAAAAAAClE/UjCvfXj-K_A/s1600/20140405_201754.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-S0Waz1KbVk8/U08bS4aTKhI/AAAAAAAAClE/UjCvfXj-K_A/s1600/20140405_201754.jpg" height="240" width="320" /></a></div>
<br />
Time to separate it from its power supply umbilical cord! The batteries were made from old and unwanted A123 cells. I wanted high capacity mainly (2300mah) but the added benefit of free and "beast mode charging capable". By the latter, I mean the lithium iron phosphate technology can be charged safety at 15 times its capacity, further meaning I can recover from low voltage at conventions quicker.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-JD4HAh-fg0I/U089Eh4CPvI/AAAAAAAAClY/KnGYDpm2TdA/s1600/20140410_180619.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-JD4HAh-fg0I/U089Eh4CPvI/AAAAAAAAClY/KnGYDpm2TdA/s1600/20140410_180619.jpg" height="240" width="320" /></a></div>
<br />
Wires and tubing are transmitted through the hollow polycarbonate tubing with a few holes.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-4SxWl7snC74/U089xkiXNgI/AAAAAAAAClg/av7I6mMjtUc/s1600/20140405_205453.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-4SxWl7snC74/U089xkiXNgI/AAAAAAAAClg/av7I6mMjtUc/s1600/20140405_205453.jpg" height="240" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-4BtHbl7fMvw/U089xq7bcrI/AAAAAAAAClk/8s3HgXIq3r8/s1600/20140405_205500.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-4BtHbl7fMvw/U089xq7bcrI/AAAAAAAAClk/8s3HgXIq3r8/s1600/20140405_205500.jpg" height="240" width="320" /></a></div>
<br />
With a bunch of sections done, it was time to simply put them all together. I was able to obtain some pneumatics components from old FIRST robots but had to buy a smaller gauge and cow-shaped manifold for the outlets. I was originally considering a network of tee fittings but it would have been too space consuming.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-fqGyvtp6SQ4/U08-U9s2FtI/AAAAAAAACl4/BvTZPXEuBNw/s1600/20140410_180616.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-fqGyvtp6SQ4/U08-U9s2FtI/AAAAAAAACl4/BvTZPXEuBNw/s1600/20140410_180616.jpg" height="240" width="320" /></a></div>
<br />
This will be mounted inside the side compartments with some screws.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-YIYWp8y1X9w/U08-a4JtqYI/AAAAAAAACmQ/k7c77e7PnUM/s1600/20140410_192015.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-YIYWp8y1X9w/U08-a4JtqYI/AAAAAAAACmQ/k7c77e7PnUM/s1600/20140410_192015.jpg" height="320" width="240" /></a></div>
<br />
Electronics mounted. The batteries were shrink wrapped to add protection. They are velcro mounted to the sides.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-wtq3dpM3sq8/U08-bKqMihI/AAAAAAAACmU/3CpmXxw0AOE/s1600/20140410_221138.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-wtq3dpM3sq8/U08-bKqMihI/AAAAAAAACmU/3CpmXxw0AOE/s1600/20140410_221138.jpg" height="320" width="240" /></a></div>
<br />
Remember those four bar linkages? Here they are fresh off the waterjet! Cut from 1/4" 6061 aluminum. The purple pieces are aluminum servo horns from Turnigy.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/--L2MJVgQCuk/U08-UwNqGeI/AAAAAAAACmA/SoD-EfJraQM/s1600/20140410_180626.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/--L2MJVgQCuk/U08-UwNqGeI/AAAAAAAACmA/SoD-EfJraQM/s1600/20140410_180626.jpg" height="240" width="320" /></a></div>
<br />
Installed on the sides.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-SlIIxl2Dfck/U08-USgzwCI/AAAAAAAACl8/ELKIbmHGQgQ/s1600/20140410_180630.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-SlIIxl2Dfck/U08-USgzwCI/AAAAAAAACl8/ELKIbmHGQgQ/s1600/20140410_180630.jpg" height="240" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-60pHruRFDeQ/U08-eoTAmyI/AAAAAAAACms/O4eTWYEXU1Q/s1600/20140410_230921.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-60pHruRFDeQ/U08-eoTAmyI/AAAAAAAACms/O4eTWYEXU1Q/s1600/20140410_230921.jpg" height="240" width="320" /></a></div>
<br />
Here is an important less about servos: not all servos are made alike! I had them wired previously to share two digital pins. Technically this should have worked since the servos are opposite each other with respect to the diagonal plane. However, we find they are not alike and need to be individually addressed in order to fine tune position. I ended up taking two of the signal wires from the servos and soldering directly to two digital pins on the arduino. A bit dirty, but should work.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-YkbX29Huv0o/U08_ePqY3dI/AAAAAAAACm0/Ez7wW5UtY1E/s1600/20140411_175734.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-YkbX29Huv0o/U08_ePqY3dI/AAAAAAAACm0/Ez7wW5UtY1E/s1600/20140411_175734.jpg" height="240" width="320" /></a></div>
<br />
Updating code...<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-FyfxPeZFgAg/U08-ZkiQgtI/AAAAAAAACmM/cGxrhUttHCE/s1600/20140410_184212.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-FyfxPeZFgAg/U08-ZkiQgtI/AAAAAAAACmM/cGxrhUttHCE/s1600/20140410_184212.jpg" height="320" width="240" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-MF8o0q1JrPs/U08-eE8cZwI/AAAAAAAACmk/QSU5cliT5jc/s1600/20140410_230912.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-MF8o0q1JrPs/U08-eE8cZwI/AAAAAAAACmk/QSU5cliT5jc/s1600/20140410_230912.jpg" height="240" width="320" /></a></div>
<br />
To attach the foam pieces, I was going to hot glue weldnuts on the backside. This way I have something secure to bolt into and allows for the pieces to be removable. To make the holes I simply aligned the back pieces to the foam and poke holes into the foam. Then I bore it out by hand to a final diameter and lightly counterbore with a 3/4" endmill.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg7hppgE3EKy-xQmwMJ7pDNpX_59EdezlUA9Fk8_XY7qd_bXDXnT8rfI9EIIHz4iMDzJsgj36u8t4vesmzuSG7klRX8QDtEnSwZeUIgWSq1kLeh5rjxCO-UCjfPyvMrpW2CYNVQsd9F9J0/s1600/20140411_003556.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg7hppgE3EKy-xQmwMJ7pDNpX_59EdezlUA9Fk8_XY7qd_bXDXnT8rfI9EIIHz4iMDzJsgj36u8t4vesmzuSG7klRX8QDtEnSwZeUIgWSq1kLeh5rjxCO-UCjfPyvMrpW2CYNVQsd9F9J0/s1600/20140411_003556.jpg" height="320" width="240" /></a></div>
<br />
All four!<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-hqyTqBUhD8c/U08_wwAk0FI/AAAAAAAACnA/PXMAkBb7EIc/s1600/20140411_003559.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-hqyTqBUhD8c/U08_wwAk0FI/AAAAAAAACnA/PXMAkBb7EIc/s1600/20140411_003559.jpg" height="320" width="240" /></a></div>
<br />
Wither those attached, I could do a semi-real simulation! Here is the hammer...<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-WQB-FhN8uwo/U08_98pymeI/AAAAAAAACnM/3ANve36JQdA/s1600/20140411_202924.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-WQB-FhN8uwo/U08_98pymeI/AAAAAAAACnM/3ANve36JQdA/s1600/20140411_202924.jpg" height="320" width="240" /></a></div>
<br />
... and the cannon!<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-z2R66ioZlTE/U08_-I7qDXI/AAAAAAAACnQ/LqE30PcRCXc/s1600/20140411_202941.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-z2R66ioZlTE/U08_-I7qDXI/AAAAAAAACnQ/LqE30PcRCXc/s1600/20140411_202941.jpg" height="320" width="240" /></a></div>
<br />
And video!<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="//www.youtube.com/embed/4ZRQbpV8BY0?rel=0" width="560"></iframe>
</div>
</div>
<div>
<br />
Now for the last two days, it is time to rush build the pneumatic pistons. How much have I gotten done so far? Well uh...<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-HxG6aauLzQY/U09Aq5HluqI/AAAAAAAACnc/iXigIlRnc5o/s1600/20140406_023806.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-HxG6aauLzQY/U09Aq5HluqI/AAAAAAAACnc/iXigIlRnc5o/s1600/20140406_023806.jpg" height="240" width="320" /></a></div>
<br />
2 hammer Jayce <3 br="" nbsp="">
<!--3--><!--3--><!--3--><!--3--></3><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-SRZg6gZaWEg/U09AwUZYYAI/AAAAAAAACnk/6yLsuxd1ors/s1600/20140412_043832.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-SRZg6gZaWEg/U09AwUZYYAI/AAAAAAAACnk/6yLsuxd1ors/s1600/20140412_043832.jpg" height="320" width="240" /></a></div>
<br />
<br />
<br />
<br />
<!--3--></div>
<div>
<h3>
<b>Debut!</b></h3>
I didnt get to go until Saturday and even then I woke up late! I rushed hurriedly to the Boston Convention Center in hopes of making the cosplay show in time. I didnt even enter the doors before I was quickly noticed. After the first transform the reaction was insane!<br />
<br />
I met some cool guys...<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-sH7qSR-bkNw/U1Bz0xoRAXI/AAAAAAAACn8/M0dObyZik2U/s1600/20140412_140251.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-sH7qSR-bkNw/U1Bz0xoRAXI/AAAAAAAACn8/M0dObyZik2U/s1600/20140412_140251.jpg" height="240" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-yoBC_83KQU8/U1Bz08lHlzI/AAAAAAAACn4/0pcOV56vMkk/s1600/20140412_140307.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-yoBC_83KQU8/U1Bz08lHlzI/AAAAAAAACn4/0pcOV56vMkk/s1600/20140412_140307.jpg" height="240" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
And ended Saturday with this nice featurette on the League of Legends tumblr. </div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
<a href="http://leagueoflegends.tumblr.com/post/82497432270/the-jayce-cosplay-is-ridiculous">http://leagueoflegends.tumblr.com/post/82497432270/the-jayce-cosplay-is-ridiculous</a></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Just a four second video that was reposted on reddit.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
<a href="http://www.reddit.com/r/leagueoflegends/comments/22vp4s/amazing_debonair_jayce_cosplay_at_pax/">http://www.reddit.com/r/leagueoflegends/comments/22vp4s/amazing_debonair_jayce_cosplay_at_pax/</a></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
And I became semi-famous instantly. At least for a day anyway. :P</div>
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-mgFnNkJVixc/U1Bz6ahXiEI/AAAAAAAACoM/OPmxb3OLFRY/s1600/20140413_122348.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-mgFnNkJVixc/U1Bz6ahXiEI/AAAAAAAACoM/OPmxb3OLFRY/s1600/20140413_122348.jpg" height="200" width="150" /></a></div>
<a href="http://1.bp.blogspot.com/-i7Jalhwm0xM/U1Bz_QRFBII/AAAAAAAACok/des8yD6MTEY/s1600/20140413_123100.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-i7Jalhwm0xM/U1Bz_QRFBII/AAAAAAAACok/des8yD6MTEY/s1600/20140413_123100.jpg" height="200" width="150" /></a> <a href="http://4.bp.blogspot.com/-yJRH2qoVBRc/U1Bz7E_27-I/AAAAAAAACoQ/8gHJotXg5sA/s1600/20140413_122412.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://4.bp.blogspot.com/-yJRH2qoVBRc/U1Bz7E_27-I/AAAAAAAACoQ/8gHJotXg5sA/s1600/20140413_122412.jpg" height="200" width="150" /></a><a href="http://1.bp.blogspot.com/-ZTajP889ds0/U1Bz7YTPqJI/AAAAAAAACoU/FjChpZ4JnIc/s1600/20140413_123049.jpg" imageanchor="1" style="clear: right; display: inline !important; margin-bottom: 1em; margin-left: 1em; text-align: center;"><img border="0" src="http://1.bp.blogspot.com/-ZTajP889ds0/U1Bz7YTPqJI/AAAAAAAACoU/FjChpZ4JnIc/s1600/20140413_123049.jpg" height="200" width="150" /></a><a href="http://4.bp.blogspot.com/-xicLGPVcGXs/U1Bz0R2tELI/AAAAAAAACn0/h-rgkIurF1A/s1600/20140412_141718.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://4.bp.blogspot.com/-xicLGPVcGXs/U1Bz0R2tELI/AAAAAAAACn0/h-rgkIurF1A/s1600/20140412_141718.jpg" height="150" width="200" /></a><a href="http://2.bp.blogspot.com/-q0vxH9h6okA/U1B0BG-JHPI/AAAAAAAACow/4PNSfESnWqI/s1600/20140413_134720.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://2.bp.blogspot.com/-q0vxH9h6okA/U1B0BG-JHPI/AAAAAAAACow/4PNSfESnWqI/s1600/20140413_134720.jpg" height="200" width="150" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-f_tpK61-fpQ/U1B0Aki5V1I/AAAAAAAACoo/2zicWuWXwbQ/s1600/20140413_134110.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-f_tpK61-fpQ/U1B0Aki5V1I/AAAAAAAACoo/2zicWuWXwbQ/s1600/20140413_134110.jpg" height="240" width="320" /></a></div>
<br />
<br /></div>
<div>
<iframe allowfullscreen="" frameborder="0" height="315" src="//www.youtube.com/embed/7O2zhqsAxy8?rel=0" width="560"></iframe>
</div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-xCl2kLDRlEs/U1DYnDKLhSI/AAAAAAAACpI/VPuLExjLkVI/s1600/1097194_520429254743336_3278736275498000300_o.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-xCl2kLDRlEs/U1DYnDKLhSI/AAAAAAAACpI/VPuLExjLkVI/s1600/1097194_520429254743336_3278736275498000300_o.jpg" height="133" width="200" /></a><a href="http://1.bp.blogspot.com/-AB_HxAk_D5A/U1DYnPs80eI/AAAAAAAACpE/Lx84JOCUxUE/s1600/1504483_10152400625191660_4800069216635712022_o.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-AB_HxAk_D5A/U1DYnPs80eI/AAAAAAAACpE/Lx84JOCUxUE/s1600/1504483_10152400625191660_4800069216635712022_o.jpg" height="200" width="133" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-g_2el7UKjbg/U5fcMPQ43iI/AAAAAAAACx8/f1_O1pizF3s/s1600/debonairjayce.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-g_2el7UKjbg/U5fcMPQ43iI/AAAAAAAACx8/f1_O1pizF3s/s1600/debonairjayce.jpg" height="218" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div>
<br />
<h3>
Reflections and Conclusions</h3>
</div>
<div>
This weekend has taught me that whatever I cosplay, I MUST make it mechanically articulated and electronically fancy! First, I kinda enjoy the attention (even if it does take me 30 mins to go down the hall) but more importantly there is some great educational opportunity here. I would say 70% of the people who took my picture wanted to know how it worked and while that is an incredibly broad question I was able to stimulate good discussion about some engineering topics.<br />
<br />
I believe cosplay can be the intersection between art and engineering. If I can build something to capture an audience, I can hopefully inspire them to investigate and learn more. This goes for anyone, no matter how young or old.<br />
<br />
Otherwise, I really need to start these projects sooner. 1 month is an impressive number to put up but boy am I exhausted qq. I'll be spending now till Dragon Con fixing the pneumatic pistons, which should be a manageable task if I just keep up this pace.</div>
<div>
<h3>
Useful Links</h3>
<a href="http://www.arduino.cc/">Arduino microcontrollers</a><br />
<a href="http://www.hobbyking.com/hobbyking/store/index.asp">Hobbyking: great source for batteries, RC equipment, and Arduinos</a><br />
<a href="https://www.bigbluesaw.com/">Big Blue Saw</a><br />
<a href="http://www.mcmaster.com/#">McMaster-Carr</a><br />
<br />
<h3>
Special Thanks</h3>
<br />
<ul>
<li>Thanks to everyone who was a part of the making or picture taking of this version of the hammer!</li>
<li><a href="http://www.etotheipiplusone.net/">Charles Guan</a> for hosting a build space, helping with printing, mixing too much epoxy, and helping with machining!</li>
<li>James Penn for taking the semi finished pictures and video!</li>
<li>Everyone for letting me know that I got fed on reddit!</li>
<li>Riot Games for making an awesome champion and posting that mini video!</li>
<li>Cathy Heo for your moral support and pro sanding ability!</li>
<li><a href="http://web.mit.edu/chosetec/www/">Brian "Iron Man" Chan</a> for use of the Hobby Shop Waterjet!</li>
<li><a href="https://www.facebook.com/Pizoobie">Amy "Pizoobie" Zhao</a> for her consultation on foam coatings!</li>
<li><a href="http://cynaesthetics.blogspot.com/">Cynthia Lu</a> for finding the RGB LED guide!</li>
<li>Thanks to my PI Anastasios John Hart for letting me slack off a bit that week XD</li>
<li>Happy Birthday to myself!</li>
<li>And last but not least, thanks to the <a href="https://www.facebook.com/groups/LeagueCosplayers/">League of Legends Cosplayers</a> Facebook group for being a constructive and awesome community! I think we can all agree the positive atmosphere in that group keeps us coming back to make another costume!</li>
</ul>
</div>
<!-- Blogger automated replacement: "https://images-blogger-opensocial.googleusercontent.com/gadgets/proxy?url=http%3A%2F%2F1.bp.blogspot.com%2F-NDZ54LAPIFA%2FU05Iopyai-I%2FAAAAAAAACh0%2FI7pDBPTTwK8%2Fs1600%2Fpneu%2Bcomp.png&container=blogger&gadget=a&rewriteMime=image%2F*" with "https://1.bp.blogspot.com/-NDZ54LAPIFA/U05Iopyai-I/AAAAAAAACh0/I7pDBPTTwK8/s1600/pneu+comp.png" -->Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com9tag:blogger.com,1999:blog-1588984194759318117.post-8704354454862252672014-03-27T16:23:00.000-04:002014-03-27T16:29:47.402-04:00Jayce: The Cosplay of Tomorrow (overdue) Version 1hicharleslookimmakingablogpostaboutthefammerfinallyareyouhappynow?<br />
_________________________________________________________________________________<br />
<h2>
<b>Introduction</b></h2>
This guy:<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-lIMlCdMc2b4/UzOMrNuxHNI/AAAAAAAACVY/R9r0wxw7t20/s1600/Jayce_Debonair_Splash.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-lIMlCdMc2b4/UzOMrNuxHNI/AAAAAAAACVY/R9r0wxw7t20/s1600/Jayce_Debonair_Splash.jpg" height="186" width="320" /></a></div>
<br />
<br />
is my favorite character in the popular online strategy game League of Legends. This is not because I like his mechanics, his character, or dashing good looks. Okay fine I like those too. But I loved the concept of the transforming hammer/cannon. This was directly in my line of 'thingsiliketocosplaywish' and so I embarked on the ambitious task of building the Mercury Hammer/Cannon for a Debonair Jayce Cosplay (Debonair is one of his skins, or appearance modified options).<br />
<br />
<h2>
<b>Analysis</b></h2>
The weapon has two forms: the hammer and the cannon. Pictures below:<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-lln_T3j_vOw/UzOMS0lSK4I/AAAAAAAACVQ/35SF_UunLKA/s1600/Jayce_Debonair_Comic.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-lln_T3j_vOw/UzOMS0lSK4I/AAAAAAAACVQ/35SF_UunLKA/s1600/Jayce_Debonair_Comic.jpg" height="177" width="320" /></a></div>
<br />
<br />
The hammer is distinguished by a yellow color, and full retraction of all the motion parts. The "wings" are in the closed position or positioned axially with the handle and the "rods" are fully retracted.<br />
<br />
The cannon is distinguished by a cyan color and full extension of the motion parts. The wings are tilted outwards at an angle, and the rods are at full extension.<br />
<br />
Immediately the engineering and design mindset went to work. The major question: "how can I replicate these shapes with enough rigidity using manufacturing methods available to me?". Immediately I began to gravitate towards plate methods for the majority of the body work, which meant waterjet and laser cutter. I had little experience foam and freeform sculpting, so I naturally gravitated towards 3D printing for high volume work of complex surface geometries. For materials, I scavenged. Luckily for me, the MIT Hobby Shop was undergoing renovations and were generously donating materials to reduce the amount of stock they had to pack. I started with a steel pole for the main mast and went ahead from there.<br />
<br />
<h2>
<b>Design</b></h2>
Basing everything off the 1" steel tube presented some proportionality issues. The weapon appears to have a larger diameter mast than 1" when compared to Jayce's hands. Still in lieu of saving money I persisted. Below are some captures of the modeling done in SolidWorks.<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-R6PnW6CtoAk/UzR3tZN85kI/AAAAAAAACZg/BvvxeZc4cN0/s1600/1072252_10151814753821660_1856410634_o.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-R6PnW6CtoAk/UzR3tZN85kI/AAAAAAAACZg/BvvxeZc4cN0/s1600/1072252_10151814753821660_1856410634_o.jpg" height="170" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-onI5MMlTRJM/UzR3tUzVeAI/AAAAAAAACZY/bwaTAS-3tog/s1600/1071549_10151815396946660_277145516_o.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-onI5MMlTRJM/UzR3tUzVeAI/AAAAAAAACZY/bwaTAS-3tog/s1600/1071549_10151815396946660_277145516_o.jpg" height="106" width="200" /></a></div>
<a href="http://4.bp.blogspot.com/-hUBs0dE6Bq4/UzR3tZAGU9I/AAAAAAAACZc/ocIITQztBkE/s1600/1090998_10151836255741660_915398886_o.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://4.bp.blogspot.com/-hUBs0dE6Bq4/UzR3tZAGU9I/AAAAAAAACZc/ocIITQztBkE/s1600/1090998_10151836255741660_915398886_o.jpg" height="107" width="200" /></a><br />
<br />
<br />
I started with the 1" dia pole and began modeling the hammer's most distinguishing features. In my mind, this was the "lamp" shaped bulb on the bottom and the four "wings" on the sides.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-8FxYiplHg7I/UzPuG-uL6oI/AAAAAAAACVs/O7-x5EgNxQE/s1600/Mercury+Hammer+2.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-8FxYiplHg7I/UzPuG-uL6oI/AAAAAAAACVs/O7-x5EgNxQE/s1600/Mercury+Hammer+2.JPG" height="108" width="200" /></a><a href="http://3.bp.blogspot.com/-stH-lPidMJ0/UzPuGwBRyiI/AAAAAAAACVo/g6PnBmYzdvY/s1600/Mercury+Hammer+3.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-stH-lPidMJ0/UzPuGwBRyiI/AAAAAAAACVo/g6PnBmYzdvY/s1600/Mercury+Hammer+3.JPG" height="108" width="200" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-WdsvsXvsNjE/UzPuG-yj0DI/AAAAAAAACVw/-u_dXv0BF1Q/s1600/Mercury+Hammer+cannon.JPG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-WdsvsXvsNjE/UzPuG-yj0DI/AAAAAAAACVw/-u_dXv0BF1Q/s1600/Mercury+Hammer+cannon.JPG" height="108" width="200" /></a><a href="http://3.bp.blogspot.com/-6OJ1mFeygVc/UzPuHpopypI/AAAAAAAACV4/ylO8ImoQEOs/s1600/Mercury+Hammer.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-6OJ1mFeygVc/UzPuHpopypI/AAAAAAAACV4/ylO8ImoQEOs/s1600/Mercury+Hammer.JPG" height="108" width="200" /></a></div>
<b><br /></b>
<br />
<h2>
<b>Construction</b></h2>
I decided to build the hammer from the inside out. This way any imperfections that could propagate through the design could be accounted for in parts not yet made. However items that would be 3D printed could be done in parallel since they take far longer than traditional machining techniques.<br />
<br />
First order of business was building the frame. I enlisted the help of a friend to waterjet some aluminum at CSAIL.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-ZADtmkAhX9Y/UzRp755VWVI/AAAAAAAACWQ/Kr_6j38RmNk/s1600/20130810_165221.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-ZADtmkAhX9Y/UzRp755VWVI/AAAAAAAACWQ/Kr_6j38RmNk/s1600/20130810_165221.jpg" height="240" width="320" /></a></div>
<br />
<br />
After some sanding, things began to take shape!<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-4atwzbAcvOk/UzRqNgnAc1I/AAAAAAAACWg/hicXKaGeejE/s1600/20130810_185414.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-4atwzbAcvOk/UzRqNgnAc1I/AAAAAAAACWg/hicXKaGeejE/s1600/20130810_185414.jpg" height="150" width="200" /></a><a href="http://2.bp.blogspot.com/-E3LTt6GvFj0/UzRracL6ROI/AAAAAAAACXE/SYLH-drvpCs/s1600/20130811_164454.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-E3LTt6GvFj0/UzRracL6ROI/AAAAAAAACXE/SYLH-drvpCs/s1600/20130811_164454.jpg" height="150" width="200" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-AKv2B2RiMjk/UzRqNd5udOI/AAAAAAAACWY/aQh6J7Onzs8/s1600/20130810_180500.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://3.bp.blogspot.com/-AKv2B2RiMjk/UzRqNd5udOI/AAAAAAAACWY/aQh6J7Onzs8/s1600/20130810_180500.jpg" height="150" width="200" /></a><a href="http://4.bp.blogspot.com/-_6vIHj3SfKU/UzRqNVmqFpI/AAAAAAAACWc/V4FSkBXXW4U/s1600/20130810_180456.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img alt="" border="0" src="http://4.bp.blogspot.com/-_6vIHj3SfKU/UzRqNVmqFpI/AAAAAAAACWc/V4FSkBXXW4U/s1600/20130810_180456.jpg" height="150" title="" width="200" /></a></div>
<br />
For the first round of 3D printing, I opted to finish the body components first. These were made on a Stratasys Dimension 1200es with lowest fill density settings.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-gMxZuHKYrb4/UzRrKuMOblI/AAAAAAAACW0/lLMi5HgA26E/s1600/20130811_144503.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-gMxZuHKYrb4/UzRrKuMOblI/AAAAAAAACW0/lLMi5HgA26E/s1600/20130811_144503.jpg" height="150" width="200" /></a></div>
<a href="http://3.bp.blogspot.com/-BPOCK1f85xA/UzRrKijTbEI/AAAAAAAACW4/pMVf2Z6ZsDo/s1600/20130811_162250.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://3.bp.blogspot.com/-BPOCK1f85xA/UzRrKijTbEI/AAAAAAAACW4/pMVf2Z6ZsDo/s1600/20130811_162250.jpg" height="150" width="200" /></a><br />
<br />
Upon assembly, I discovered them to be fairly good missile launchers. Maybe reuse for future work? :P<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-KwAavuPVVNY/UzRrwXFi-AI/AAAAAAAACXM/xP6sFoXu-X8/s1600/20130811_174816.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-KwAavuPVVNY/UzRrwXFi-AI/AAAAAAAACXM/xP6sFoXu-X8/s1600/20130811_174816.jpg" height="240" width="320" /></a></div>
<br />
Suddenly, the body appears! Starting to look like a Debonair Jayce Mercury Hammer!<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEikJj_sK15w0gvIWW9Iut93KuvuSYM-Eo904goxnjRjNwjT4fDngbirQhQIohflr-KfqRl0p0ryFJMy9QW7K4Iw49iQQVVgUyET3fsHmIvMcpumuicT1ho5W3GHanGa4gEvL8aakm2HtUU/s1600/20130811_165145.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEikJj_sK15w0gvIWW9Iut93KuvuSYM-Eo904goxnjRjNwjT4fDngbirQhQIohflr-KfqRl0p0ryFJMy9QW7K4Iw49iQQVVgUyET3fsHmIvMcpumuicT1ho5W3GHanGa4gEvL8aakm2HtUU/s1600/20130811_165145.jpg" height="200" width="150" /></a></div>
<a href="http://1.bp.blogspot.com/-449osGCjaDQ/UzRuJDvWBAI/AAAAAAAACXY/x6njUJF63Yg/s1600/20130811_165153.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://1.bp.blogspot.com/-449osGCjaDQ/UzRuJDvWBAI/AAAAAAAACXY/x6njUJF63Yg/s1600/20130811_165153.jpg" height="150" width="200" /></a><br />
<br />
<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-vpIhLNYLLuI/UzRuenFslwI/AAAAAAAACXo/omzaWmhfDLM/s1600/20130811_183921.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-vpIhLNYLLuI/UzRuenFslwI/AAAAAAAACXo/omzaWmhfDLM/s1600/20130811_183921.jpg" height="150" width="200" /></a></div>
<a href="http://4.bp.blogspot.com/-7uVUDn4T8qs/UzRufQ7KmTI/AAAAAAAACXw/eQ9Q3D16Sz4/s1600/20130811_204000.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://4.bp.blogspot.com/-7uVUDn4T8qs/UzRufQ7KmTI/AAAAAAAACXw/eQ9Q3D16Sz4/s1600/20130811_204000.jpg" height="150" width="200" /></a><br />
<br />
Now its time to add the motors. To make them hammer duty, I had to cut a corner off the gearbox but more importantly I had to replace the shaft. Having that lengthy 12" dual shaft was key for my dual use clutch idea to work. At the same time, I also pushed some ball bearings in the frame to help alleviate off axis loading on the motors.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-EfEhlzl0jQk/UzRvQxBR-3I/AAAAAAAACYM/zdRt2cAU5Vw/s1600/20130811_174529.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-EfEhlzl0jQk/UzRvQxBR-3I/AAAAAAAACYM/zdRt2cAU5Vw/s1600/20130811_174529.jpg" height="150" width="200" /></a></div>
<a href="http://1.bp.blogspot.com/-cDNu5nbQYUQ/UzRvPzbim1I/AAAAAAAACYA/mrwfowBK5ZM/s1600/20130811_181136.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://1.bp.blogspot.com/-cDNu5nbQYUQ/UzRvPzbim1I/AAAAAAAACYA/mrwfowBK5ZM/s1600/20130811_181136.jpg" height="150" width="200" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-uT-Ovl05nfM/UzRvTIPuNQI/AAAAAAAACYU/X6z8dJ3Gzo8/s1600/20130811_203124.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-uT-Ovl05nfM/UzRvTIPuNQI/AAAAAAAACYU/X6z8dJ3Gzo8/s1600/20130811_203124.jpg" height="150" width="200" /></a></div>
<a href="http://2.bp.blogspot.com/-VMaU2K5_yZM/UzRvPy-MjuI/AAAAAAAACX8/lRy6njSxpnI/s1600/20130811_165917.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://2.bp.blogspot.com/-VMaU2K5_yZM/UzRvPy-MjuI/AAAAAAAACX8/lRy6njSxpnI/s1600/20130811_165917.jpg" height="150" width="200" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-dHqcxSAaIWY/UzRv_T8dniI/AAAAAAAACYg/gXw0oaLU5k8/s1600/20130811_203128.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-dHqcxSAaIWY/UzRv_T8dniI/AAAAAAAACYg/gXw0oaLU5k8/s1600/20130811_203128.jpg" height="150" width="200" /></a></div>
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh5Eg9cZzPrV4aqcyBOldIaTg5pbf-cprQb4GmvZk1bgUCTa0OTp61pUivHKPQ2MlBHn4nhGUANCdkJVLmQ6lO-uIcsTFnL2JGe9sIFnmB2i1KZ26mqAse6BwrKH5uDZBcUEQ86IZMsbDM/s1600/20130813_174049.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh5Eg9cZzPrV4aqcyBOldIaTg5pbf-cprQb4GmvZk1bgUCTa0OTp61pUivHKPQ2MlBHn4nhGUANCdkJVLmQ6lO-uIcsTFnL2JGe9sIFnmB2i1KZ26mqAse6BwrKH5uDZBcUEQ86IZMsbDM/s1600/20130813_174049.jpg" height="150" width="200" /></a><br />
<br />
Speaking of motor work, I bet it isnt quite obvious how so many mechanisms are being powered off a single motor. Well, since this design uses pure rotation to change the angle of the wings, the gearmotor makes sense. But what about the linear action of the "rods"?<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-NaztVmwPoc8/UzR1UUHjd2I/AAAAAAAACY0/MYSMgWWcPKA/s1600/20130812_200900.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-NaztVmwPoc8/UzR1UUHjd2I/AAAAAAAACY0/MYSMgWWcPKA/s1600/20130812_200900.jpg" height="150" width="200" /></a> <a href="http://3.bp.blogspot.com/-9UOgyGWOetg/UzR3zBCLJGI/AAAAAAAACZw/XGlu-ChUv2k/s1600/1078682_10151836251796660_1724459632_o.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-9UOgyGWOetg/UzR3zBCLJGI/AAAAAAAACZw/XGlu-ChUv2k/s1600/1078682_10151836251796660_1724459632_o.jpg" height="105" width="200" /></a></div>
<br />
<br />
<br />
For this I am implementing an elevator mechanism powered by a tension cord. Basically, there are multiple stages that can move linearly along each other all connected by a string. The string is wound throughout the stages. When the string is taught, the relative length decreases and forces the parts to move. This idea would be very difficult to implement in such a small space and with limited materials. However, it turns out to work in my bench tests! Hooray concepts!<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="//www.youtube.com/embed/pjF3S2zMWHw?rel=0" width="560"></iframe>
<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="//www.youtube.com/embed/6bIiwwNUa3Q?rel=0" width="560"></iframe>
<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="//www.youtube.com/embed/oN5JW3qik_o?rel=0" width="560"></iframe>
<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="//www.youtube.com/embed/CASoEBLxd-4?rel=0" width="560"></iframe>
<br />
<br />
Next came the flurry of laser cutting. All the non-structural paneling was done in craft wood (thin plywood), laser cut to shape, sanded, and painted.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-hWqzV8PQx9E/UzR2KEnPjHI/AAAAAAAACZA/vF9DEs_Vzbo/s1600/20130815_212958.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-hWqzV8PQx9E/UzR2KEnPjHI/AAAAAAAACZA/vF9DEs_Vzbo/s1600/20130815_212958.jpg" height="200" width="150" /></a></div>
<a href="http://4.bp.blogspot.com/-JA8xmwr6YEI/UzR2JiJLPII/AAAAAAAACY8/oLPQO4zFW-c/s1600/20130815_190438.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://4.bp.blogspot.com/-JA8xmwr6YEI/UzR2JiJLPII/AAAAAAAACY8/oLPQO4zFW-c/s1600/20130815_190438.jpg" height="150" width="200" /></a><br />
<br />
<br />
<br />
<br />
I would like to shout out to a piece of software called 123D Make. This program from Autodesk takes STL files and affords you several methods for creating its volume. This was incredibly useful for the "wings" because of their high volume but desire for low weight. I use 123D Make to make the "wings" from several slotted panels. Then I joined them together with a dab of super glue.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-DRU_FDTJha0/UzR3k0_el2I/AAAAAAAACZQ/MsxlQEMufhc/s1600/1147531_10151837318256660_337447685_o.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-DRU_FDTJha0/UzR3k0_el2I/AAAAAAAACZQ/MsxlQEMufhc/s1600/1147531_10151837318256660_337447685_o.jpg" height="174" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-h5X5EXdUBNY/UzR4Ts0cLeI/AAAAAAAACaE/oayp2tuNX7M/s1600/20130815_205258.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-h5X5EXdUBNY/UzR4Ts0cLeI/AAAAAAAACaE/oayp2tuNX7M/s1600/20130815_205258.jpg" height="150" width="200" /></a><a href="http://4.bp.blogspot.com/-tG_hB1r8j30/UzR4TrS2QVI/AAAAAAAACZ8/Kx4T88LucVo/s1600/20130816_180803.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-tG_hB1r8j30/UzR4TrS2QVI/AAAAAAAACZ8/Kx4T88LucVo/s1600/20130816_180803.jpg" height="150" width="200" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-U3F8_hoTSXg/UzR4S7YnsZI/AAAAAAAACZ4/OqixI3M81Uw/s1600/20130815_210158.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-U3F8_hoTSXg/UzR4S7YnsZI/AAAAAAAACZ4/OqixI3M81Uw/s1600/20130815_210158.jpg" height="240" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Now things are beginning to take shape!</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-fqjgd77TRKA/UzR6II7FNKI/AAAAAAAACaY/6Xvk5T0XHgg/s1600/20130816_220258.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-fqjgd77TRKA/UzR6II7FNKI/AAAAAAAACaY/6Xvk5T0XHgg/s1600/20130816_220258.jpg" height="150" width="200" /></a></div>
<a href="http://3.bp.blogspot.com/-BwtnI6DMMaA/UzR6IB5YKOI/AAAAAAAACac/FGfYLsVyyVE/s1600/20130816_220305.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://3.bp.blogspot.com/-BwtnI6DMMaA/UzR6IB5YKOI/AAAAAAAACac/FGfYLsVyyVE/s1600/20130816_220305.jpg" height="150" width="200" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-MaQAM7fT_uU/UzR6H3MUvfI/AAAAAAAACaU/9dFOFQE9hsc/s1600/20130816_221939.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-MaQAM7fT_uU/UzR6H3MUvfI/AAAAAAAACaU/9dFOFQE9hsc/s1600/20130816_221939.jpg" height="150" width="200" /></a></div>
<a href="http://3.bp.blogspot.com/-TaQX3YRrIbo/UzR6K93ZFdI/AAAAAAAACas/VYkVuiR4sbo/s1600/20130816_221959.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://3.bp.blogspot.com/-TaQX3YRrIbo/UzR6K93ZFdI/AAAAAAAACas/VYkVuiR4sbo/s1600/20130816_221959.jpg" height="150" width="200" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-RNSs2hdSSwY/UzR7n6eUgvI/AAAAAAAACbk/C6g8DsbmkDc/s1600/20130819_213617.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-RNSs2hdSSwY/UzR7n6eUgvI/AAAAAAAACbk/C6g8DsbmkDc/s1600/20130819_213617.jpg" height="150" width="200" /></a></div>
<a href="http://4.bp.blogspot.com/-s_vkqjb_tMc/UzR7oJEZ2dI/AAAAAAAACbo/-ym40tURJP4/s1600/20130819_213610.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://4.bp.blogspot.com/-s_vkqjb_tMc/UzR7oJEZ2dI/AAAAAAAACbo/-ym40tURJP4/s1600/20130819_213610.jpg" height="200" width="150" /></a><br />
<br />
<br />
The next hard part was figuring out how to skin the "wings". I had tried several things like covering in duct tape and filling with expanding foam (very messy). I ended up exporting the faces of the "wings" as dxf files with sketched bend lines and laser cutting from "tank board", aka the backing on notepads.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-CKEKzfrZKhU/UzR7HW-_utI/AAAAAAAACbE/J29lXGvpgA4/s1600/20130817_205013.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-CKEKzfrZKhU/UzR7HW-_utI/AAAAAAAACbE/J29lXGvpgA4/s1600/20130817_205013.jpg" height="150" width="200" /></a></div>
<a href="http://4.bp.blogspot.com/-CvcEwafS3dU/UzR7DTNaRtI/AAAAAAAACa4/jkklO31nszw/s1600/20130820_162539.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://4.bp.blogspot.com/-CvcEwafS3dU/UzR7DTNaRtI/AAAAAAAACa4/jkklO31nszw/s1600/20130820_162539.jpg" height="150" width="200" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-WnsUuMPWRc4/UzR7DGTJz6I/AAAAAAAACa0/Lv-hFbNZDv4/s1600/20130820_162546.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-WnsUuMPWRc4/UzR7DGTJz6I/AAAAAAAACa0/Lv-hFbNZDv4/s1600/20130820_162546.jpg" height="150" width="200" /></a></div>
<a href="http://4.bp.blogspot.com/-GprmvBlVmYg/UzR7IL4XnMI/AAAAAAAACbM/3IGpwo8dXE8/s1600/20130820_185720.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://4.bp.blogspot.com/-GprmvBlVmYg/UzR7IL4XnMI/AAAAAAAACbM/3IGpwo8dXE8/s1600/20130820_185720.jpg" height="150" width="200" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-bcGIqf_vuuA/UzR7Jg9eTmI/AAAAAAAACbU/-BYjIfsmfA8/s1600/20130822_223447.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-bcGIqf_vuuA/UzR7Jg9eTmI/AAAAAAAACbU/-BYjIfsmfA8/s1600/20130822_223447.jpg" height="150" width="200" /></a></div>
<a href="http://4.bp.blogspot.com/-JkICUuXUPNU/UzR7LJA4YAI/AAAAAAAACbc/bLzR7F3xFtI/s1600/20130822_224510.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://4.bp.blogspot.com/-JkICUuXUPNU/UzR7LJA4YAI/AAAAAAAACbc/bLzR7F3xFtI/s1600/20130822_224510.jpg" height="150" width="200" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: left;">
From then on, it was about making duplicates of things that worked, decorating, and making finer details. Here are some laser cut decorations for the body face panels, the tips of the "rods" and some spray painting. I have the hammer here suspended using fiber straps from a garage assembly. One unfortunate aspect was the hammer ended up being really heavy or at least feeling very heavy due to physics. To help relieve weight, I tried to pocket the metal pieces. The heaviest part ended up being the "wings" but not much could be done about those now that they were assembled.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-2aZTsOujQq0/UzR8WAojDaI/AAAAAAAACb4/84FZKYuL-10/s1600/20130821_204617.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-2aZTsOujQq0/UzR8WAojDaI/AAAAAAAACb4/84FZKYuL-10/s1600/20130821_204617.jpg" height="150" width="200" /></a></div>
<a href="http://4.bp.blogspot.com/-ySnt8TbbuQk/UzR8WEFiDnI/AAAAAAAACb0/ddYm10JJdMs/s1600/20130822_221748.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://4.bp.blogspot.com/-ySnt8TbbuQk/UzR8WEFiDnI/AAAAAAAACb0/ddYm10JJdMs/s1600/20130822_221748.jpg" height="150" width="200" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-03EiOghZ9mw/UzR8WDvzK3I/AAAAAAAACb8/B_hPTk22Z-g/s1600/20130823_201301.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-03EiOghZ9mw/UzR8WDvzK3I/AAAAAAAACb8/B_hPTk22Z-g/s1600/20130823_201301.jpg" height="150" width="200" /></a></div>
<a href="http://2.bp.blogspot.com/-Qnwd7h9xg-0/UzR8ZIYAOGI/AAAAAAAACcM/_T1WO8kl1AM/s1600/20130823_210703.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://2.bp.blogspot.com/-Qnwd7h9xg-0/UzR8ZIYAOGI/AAAAAAAACcM/_T1WO8kl1AM/s1600/20130823_210703.jpg" height="150" width="200" /></a><br />
<div class="separator" style="clear: both; text-align: left;">
Despite all the hard work, I could not actually finish the fully functional hammer. Because of the ~16 hour drive to Atlanta for Dragon Con, I had to focus on decoration instead of mechanics. As a result, I could not properly debug issues regarding high stress points in the elevator mechanism, or clutch tuning for the wings. I decided to lock Jayce's weapon into a hammer configuration for the duration of the trip. Here are the final pictures.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-KUq0ZkLuJ8o/UzR-Bq6pcgI/AAAAAAAACcg/dBcMf3m8pxY/s1600/20130827_040732.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-KUq0ZkLuJ8o/UzR-Bq6pcgI/AAAAAAAACcg/dBcMf3m8pxY/s1600/20130827_040732.jpg" height="200" width="150" /></a></div>
<a href="http://3.bp.blogspot.com/-jSiWdUCqy0Y/UzR-Bi461aI/AAAAAAAACcY/G1WQSOOzNmk/s1600/20130827_040738.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://3.bp.blogspot.com/-jSiWdUCqy0Y/UzR-Bi461aI/AAAAAAAACcY/G1WQSOOzNmk/s1600/20130827_040738.jpg" height="150" width="200" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-ZHBJDAoZYjI/UzR-BgSTmFI/AAAAAAAACcc/mBCxFFBLTAc/s1600/20130827_040752.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-ZHBJDAoZYjI/UzR-BgSTmFI/AAAAAAAACcc/mBCxFFBLTAc/s1600/20130827_040752.jpg" height="150" width="200" /></a></div>
<a href="http://2.bp.blogspot.com/-KvIoA1LtIsg/UzR-ETSWkjI/AAAAAAAACcw/kcUN-3_p-Gs/s1600/20130827_040757.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://2.bp.blogspot.com/-KvIoA1LtIsg/UzR-ETSWkjI/AAAAAAAACcw/kcUN-3_p-Gs/s1600/20130827_040757.jpg" height="150" width="200" /></a><br />
<br />
Even though I didnt do much with electronics this time around, its worth noting. I left out the LEDs and effects and wanted to focus on purely mechanical aspects. In that respect, I only needed a method of transmitting power and the ability to reverse the direction of current. I was able to do this easily with a DPDT (dual position, dual throw) switch and a push button. The push button was used to flow current (read: complete circuit) and the switch was used to swap the direction of current. I could use two single throw switches, but this method is more fool proof since there is no shorting condition.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-k_DeywTRu6g/UzR_xsXFkrI/AAAAAAAACc8/q4YYjMRBMoU/s1600/20130821_231359.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-k_DeywTRu6g/UzR_xsXFkrI/AAAAAAAACc8/q4YYjMRBMoU/s1600/20130821_231359.jpg" height="240" width="320" /></a></div>
<br />
There was some cloth involved, but it did not involve much work on my end. I essentially bought towards a white tuxedo with tailcoat. Ebay is your friend in this case.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/--vnQ75lu7Lo/UzSEY_KzSrI/AAAAAAAACeM/ipRMH-CYJHU/s1600/20130817_140255.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/--vnQ75lu7Lo/UzSEY_KzSrI/AAAAAAAACeM/ipRMH-CYJHU/s1600/20130817_140255.jpg" height="320" width="240" /></a></div>
<br />
<br />
<h2 style="clear: both; text-align: left;">
<b>Implementation</b></h2>
<div class="separator" style="clear: both; text-align: left;">
I bought this guy to Dragon Con 2013 and later to Anime Boston 2014. At both events, the hammer was well received. A lot of good comments about detail, craftsmanship, and OMGWTFSOHEAVY. The question I loved and hated to hear was "Can it actually transform?!". Because it was essentially broken and perma-hammer mode it was heartbreaking. I had to simply respond, "I accidentally did the thing."</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<h3>
<u>Dragon Con 2013</u></h3>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjfPiuF_i5aurtZ6iVnxWKCOBjNj5sK4kdcBEdtxL6oxRvpYdAXxkWYRJBdgN2yNI_EQN9oLBhzIEAltVOyV0LriQWktd4y9i9WcDCXoQ97kdJ47HHwGP2kcTsVMgegKwJgP10HM-gD2u8/s1600/20130831_162805.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjfPiuF_i5aurtZ6iVnxWKCOBjNj5sK4kdcBEdtxL6oxRvpYdAXxkWYRJBdgN2yNI_EQN9oLBhzIEAltVOyV0LriQWktd4y9i9WcDCXoQ97kdJ47HHwGP2kcTsVMgegKwJgP10HM-gD2u8/s1600/20130831_162805.jpg" height="320" width="240" /></a></div>
<a href="http://1.bp.blogspot.com/-HzhVKsRe3iY/UzSCTzG6nmI/AAAAAAAACdQ/DtFrTq70CNM/s1600/1275421_10151894824971660_733803241_o.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://1.bp.blogspot.com/-HzhVKsRe3iY/UzSCTzG6nmI/AAAAAAAACdQ/DtFrTq70CNM/s1600/1275421_10151894824971660_733803241_o.jpg" height="320" width="222" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-IWQpJQqQyMo/UzSFYxeMD8I/AAAAAAAACew/X_Dk_F9XNMc/s1600/178484_582062431860802_1398381406_o.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-IWQpJQqQyMo/UzSFYxeMD8I/AAAAAAAACew/X_Dk_F9XNMc/s1600/178484_582062431860802_1398381406_o.jpg" height="133" width="200" /></a></div>
<a href="http://1.bp.blogspot.com/-ASGYbUJfUcs/UzSFVkL1LNI/AAAAAAAACeY/DHtdb7MtupY/s1600/1052588_587135854686793_916007695_o.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://1.bp.blogspot.com/-ASGYbUJfUcs/UzSFVkL1LNI/AAAAAAAACeY/DHtdb7MtupY/s1600/1052588_587135854686793_916007695_o.jpg" height="200" width="133" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-u_T2gPfqZFg/UzSFVzVxZHI/AAAAAAAACeg/4YsBEO8KG6I/s1600/1270372_582062478527464_1196399752_o.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-u_T2gPfqZFg/UzSFVzVxZHI/AAAAAAAACeg/4YsBEO8KG6I/s1600/1270372_582062478527464_1196399752_o.jpg" height="133" width="200" /></a></div>
<a href="http://4.bp.blogspot.com/-EsFaT_1cK74/UzSFVwraxpI/AAAAAAAACec/Fjoq_YIFbPo/s1600/1277565_582062185194160_1705132705_o.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://4.bp.blogspot.com/-EsFaT_1cK74/UzSFVwraxpI/AAAAAAAACec/Fjoq_YIFbPo/s1600/1277565_582062185194160_1705132705_o.jpg" height="133" width="200" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhZTVOYsA6hT2AhPI1DlWkGpozEc4w-ucXIpt79eK-Ljrs4TohT6LAvorckJAw72Bv5ZUJEAvc1PpZiVr6D5ceRJ93mJ-crb4WKKCToNAwd5TqL87ZUi0BA2tT_OCuYG7kKLrxuhI1JwmQ/s1600/1208958_598413943530082_2084667034_n.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhZTVOYsA6hT2AhPI1DlWkGpozEc4w-ucXIpt79eK-Ljrs4TohT6LAvorckJAw72Bv5ZUJEAvc1PpZiVr6D5ceRJ93mJ-crb4WKKCToNAwd5TqL87ZUi0BA2tT_OCuYG7kKLrxuhI1JwmQ/s1600/1208958_598413943530082_2084667034_n.jpg" height="200" width="133" /></a></div>
<a href="http://1.bp.blogspot.com/-q1otFTGhZZ4/UzSGEFdDHJI/AAAAAAAACe4/GQ3s4-vx2oU/s1600/565011_598412930196850_420196048_n.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://1.bp.blogspot.com/-q1otFTGhZZ4/UzSGEFdDHJI/AAAAAAAACe4/GQ3s4-vx2oU/s1600/565011_598412930196850_420196048_n.jpg" height="200" width="133" /></a><br />
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-cz5f-5OOn_k/UzSGvZjhLZI/AAAAAAAACfM/AIUNGwiDv4M/s1600/1157470_598415416863268_1647108519_n.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-cz5f-5OOn_k/UzSGvZjhLZI/AAAAAAAACfM/AIUNGwiDv4M/s1600/1157470_598415416863268_1647108519_n.jpg" height="133" width="200" /></a></div>
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEizpCDivmQ_quOjWnhDUCnkNWiEHd-wC635bI0ShQHXzxZ7bxDo6UjpkHyGEajhu5zueR2lu3_GJd4UlcuVYj-QrGB1z4Hv9L6_67tkzt4zodyygv8lcvKiDktSS38Ua6LolmzdAaHxz50/s1600/1231325_598415066863303_152423258_n.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEizpCDivmQ_quOjWnhDUCnkNWiEHd-wC635bI0ShQHXzxZ7bxDo6UjpkHyGEajhu5zueR2lu3_GJd4UlcuVYj-QrGB1z4Hv9L6_67tkzt4zodyygv8lcvKiDktSS38Ua6LolmzdAaHxz50/s1600/1231325_598415066863303_152423258_n.jpg" height="200" width="133" /></a><br />
<h3>
<u>Anime Boston 2014</u></h3>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-fb-zkOK0IG8/UzSDpj3cfaI/AAAAAAAACdc/li3bmAfEZS4/s1600/PSX_20140324_010229.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-fb-zkOK0IG8/UzSDpj3cfaI/AAAAAAAACdc/li3bmAfEZS4/s1600/PSX_20140324_010229.jpg" height="150" width="200" /></a></div>
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiubXmlzJrDLxlqNzwQI4oVeQRLf_61eM4MJKay4ckMWDC3kbvFgfFv9J80uhUa1ew99EgoMEgu8Re69LUjW_Pr5UQYUXzz2VL2D-qBv1XWjPV9YolnYAbbiyyn5FogUahTd5dJqb7FKoE/s1600/PSX_20140324_010315.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiubXmlzJrDLxlqNzwQI4oVeQRLf_61eM4MJKay4ckMWDC3kbvFgfFv9J80uhUa1ew99EgoMEgu8Re69LUjW_Pr5UQYUXzz2VL2D-qBv1XWjPV9YolnYAbbiyyn5FogUahTd5dJqb7FKoE/s1600/PSX_20140324_010315.jpg" height="200" width="150" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-fzkg0UPsWAg/UzSDp2Ss00I/AAAAAAAACds/HIfx_mlcpoM/s1600/PSX_20140324_010951.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-fzkg0UPsWAg/UzSDp2Ss00I/AAAAAAAACds/HIfx_mlcpoM/s1600/PSX_20140324_010951.jpg" height="200" width="150" /></a></div>
<a href="http://4.bp.blogspot.com/-wEoxN6zXx-8/UzSDrsTZfCI/AAAAAAAACdw/kk4A5QPuSSY/s1600/PSX_20140324_011113.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://4.bp.blogspot.com/-wEoxN6zXx-8/UzSDrsTZfCI/AAAAAAAACdw/kk4A5QPuSSY/s1600/PSX_20140324_011113.jpg" height="200" width="150" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-qQ4UF13s-Os/UzSDsNuFtFI/AAAAAAAACd0/rRu78RyGvXw/s1600/PSX_20140324_011325.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-qQ4UF13s-Os/UzSDsNuFtFI/AAAAAAAACd0/rRu78RyGvXw/s1600/PSX_20140324_011325.jpg" height="150" width="200" /></a></div>
<a href="http://3.bp.blogspot.com/-vgygVWLLwLY/UzSDtCtF9nI/AAAAAAAACeA/yLwUGFghraI/s1600/PSX_20140324_012604.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://3.bp.blogspot.com/-vgygVWLLwLY/UzSDtCtF9nI/AAAAAAAACeA/yLwUGFghraI/s1600/PSX_20140324_012604.jpg" height="150" width="200" /></a><br />
<br />
<br />
I hope you enjoyed this very late recap of this build. I was rather sparse on some sections because of the last-minute rush; I was not able to document those stages very well (with regards to painting and wiring). Still I would like to say a few things.<br />
<br />
First, a thanks to my friends who supported and helped me through the build. This includes Charles Guan, Steven Jorgensen, Julia Hopkins, and many more!<br />
<br />
Second, I would like the point out the title of this post "... Version 1". There was a version 2 supposed to debut at Anime Boston but could not be finished in time. It will be done by the next convention however. See you guys are Pax East 2014!<br />
<br />
___________________________________________________________________<br />
Some photos taken by <b>Ace T. Cosplay & Photography</b><br />
Some photo taken by <b>Zuli's Cosplay</b>Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com6tag:blogger.com,1999:blog-1588984194759318117.post-45672432847266621792014-02-04T10:42:00.000-05:002014-02-04T11:00:07.281-05:00Peeling Up: An Up Mini Temperature HackJust purchased a 3D Printer for a certain special course that I am TA for this spring term. See below, its an <a href="http://www.pp3dp.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=6&category_id=1&option=com_virtuemart&Itemid=37&vmcchk=1&Itemid=37">Up Mini!</a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-EHhycrT_L_E/UvEHveF-67I/AAAAAAAACSc/Cb0WUqybJ2I/s1600/20140124_125701.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://1.bp.blogspot.com/-EHhycrT_L_E/UvEHveF-67I/AAAAAAAACSc/Cb0WUqybJ2I/s1600/20140124_125701.jpg" height="320" width="240" /></a></div>
<picture mini="" of="" up=""></picture><br />
<br />
These guys had great reviews off the MAKE Magazine 3D Printer guide for 2014 and with a nominally low cost we were interested in making these become the primary workhorse of the course. The Form-1's and Mojo's may feel a bit sad.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
<iframe allowfullscreen='allowfullscreen' webkitallowfullscreen='webkitallowfullscreen' mozallowfullscreen='mozallowfullscreen' width='320' height='266' src='https://www.blogger.com/video.g?token=AD6v5dwjzR5wtYe_ZbpXNYIe58zXd84KxZ25iV6RJZ1I8XwU88nRGNlKUjzuijdUKm7chdPl-ZDcprurEyIbCNzVaw' class='b-hbp-video b-uploaded' frameborder='0'></iframe></div>
<br />
<br />
There is a lot of good to say about this guy; nearly plug-and-play operation for Windows 8*, a superb software that considers the end user (except their ears), and a PCB print surface that enhances adhesion during the print but also facilitates easy removal after the job.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-xGOlOFvZ1dQ/UvEH_2cqAhI/AAAAAAAACSs/FXfdmgPJ218/s1600/20140124_134556.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-xGOlOFvZ1dQ/UvEH_2cqAhI/AAAAAAAACSs/FXfdmgPJ218/s1600/20140124_134556.jpg" height="320" width="240" /></a></div>
<picture part="" warping=""></picture><br />
<br />
The one bad part is the warping for ABS materials. I made several calibration test prints and anything with gratuitous flat surface came up with nasty warping on one side. The Up Plus that my buddy Charles has never suffered from this issue and its hard to imagine that they downgraded between revisions.<br />
<br />
Investigation showed the bed temperature was 60 deg C for both ABS and PLA. Two things strange about this. PLA doesn't need temperature stability to print well (especially on this perforated surface) and the bed temperature for ABS is half that of what other machines report as an ideal setting.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-0vLA73NxZsg/UvEJ8UlgixI/AAAAAAAACUA/HQ1kvWav39c/s1600/wheremytempo.png" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-0vLA73NxZsg/UvEJ8UlgixI/AAAAAAAACUA/HQ1kvWav39c/s1600/wheremytempo.png" height="179" width="320" /></a></div>
<now dont="" me="" not="" see="" you=""></now><br />
<br />
So how do I change it? In the Up Plus, the user could view the temperature settings under the "Maintenance" options. The bed temperature displays under the extruder temperature in the upper right of the window. However, when connected to the Up Mini the temperature option disappears! Stratasys holds a patent on heated enclosure systems, a feature that happens to be advertised by others when considering this machine. Is this Up's hilarious method of avoiding legal?<br />
<br />
Okay, how about hardware fixes? I remove two screws and a ribbon cable to access the heated bed itself. The ribbon cable presumably connects to a heating element, the temperature sensor, etc...<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-rAvlvjt08H4/UvEIStZuTtI/AAAAAAAACS0/YQbiMUkEP08/s1600/20140131_142105.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-rAvlvjt08H4/UvEIStZuTtI/AAAAAAAACS0/YQbiMUkEP08/s1600/20140131_142105.jpg" height="240" width="320" /></a></div>
<picture bed="" of="" underside=""></picture><br />
<br />
NOPE. The bed is a routed circuit board resistive heater with a SINGLE component on it. Its not even a magical IC, its a single transistor. This engineer is good at saving money.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-koXOCHgbNRU/UvEJo5HgeyI/AAAAAAAACT4/BF9WoTpMxPs/s1600/ksd01f.png" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-koXOCHgbNRU/UvEJo5HgeyI/AAAAAAAACT4/BF9WoTpMxPs/s1600/ksd01f.png" height="212" width="320" /></a></div>
<thermostat schematic="" screencap=""></thermostat><br />
<br />
Investigation of this KSD-01F shows that a) it is native chinese and b) is nothing more than a temperature switch (thermostat). The controller pumps current into the board until it reaches a temperature threshold. Then the transistor shuts off and the board is assumed to maintain steady state as it switches on and off and temperature fluctuates about the cutoff. These thermostats appear to sell in a variety of different temperature cutoffs.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-NLUfJUp66iA/UvEIafTrR0I/AAAAAAAACS8/lJFQKQK24ks/s1600/20140201_112650.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://3.bp.blogspot.com/-NLUfJUp66iA/UvEIafTrR0I/AAAAAAAACS8/lJFQKQK24ks/s1600/20140201_112650.jpg" height="240" width="320" /></a></div>
<replaced thermostat=""></replaced><br />
<br />
This is so ghetto, I decided to hack it. Using the Up Plus as the paragon of 3D printing, I set my target temperature to 100 deg C. I <a href="http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=ksd-01f&sprefix=ksd-0%2Caps&rh=i%3Aaps%2Ck%3Aksd-01f">purchased a higher temperature model from amazon</a> and soldered it onto the board in place of the old one.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-pviZ3xBicB0/UvEIujezI9I/AAAAAAAACTE/akngQOszkYw/s1600/20140201_124134.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-pviZ3xBicB0/UvEIujezI9I/AAAAAAAACTE/akngQOszkYw/s1600/20140201_124134.jpg" height="240" width="320" /></a></div>
<good parts=""></good><br />
<br />
As a simple test, I allowed the bed to preheat for and hour and began a print. The result was simply phenomenal. No warping at any section of the part. Subsequent prints of various size and shape also returned similar results.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-pV3WtmeEzls/UvEIzKISgJI/AAAAAAAACTM/4ogTzUd5TPI/s1600/20140203_093002.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://2.bp.blogspot.com/-pV3WtmeEzls/UvEIzKISgJI/AAAAAAAACTM/4ogTzUd5TPI/s1600/20140203_093002.jpg" height="150" width="200" /></a></div>
<a href="http://3.bp.blogspot.com/-iN0o6nPAGIg/UvEIzKRo7JI/AAAAAAAACTU/Qa2Q66ucSP8/s1600/20140203_093009.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://3.bp.blogspot.com/-iN0o6nPAGIg/UvEIzKRo7JI/AAAAAAAACTU/Qa2Q66ucSP8/s1600/20140203_093009.jpg" height="150" width="200" /></a><br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-nGaCAnsJ7j0/UvEIzSIGcjI/AAAAAAAACTQ/JpYTiyx4EfE/s1600/20140203_093014.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-nGaCAnsJ7j0/UvEIzSIGcjI/AAAAAAAACTQ/JpYTiyx4EfE/s1600/20140203_093014.jpg" height="150" width="200" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-yCW0fVxSeMg/UvEIz7O3pAI/AAAAAAAACTY/Awlyy0MifFs/s1600/20140203_173859.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" src="http://4.bp.blogspot.com/-yCW0fVxSeMg/UvEIz7O3pAI/AAAAAAAACTY/Awlyy0MifFs/s1600/20140203_173859.jpg" height="150" width="200" /></a></div>
<a href="http://3.bp.blogspot.com/-90cAQVbAgyI/UvEIz_mqdHI/AAAAAAAACTo/g51YFIsba0Y/s1600/20140203_173908.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em; text-align: center;"><img border="0" src="http://3.bp.blogspot.com/-90cAQVbAgyI/UvEIz_mqdHI/AAAAAAAACTo/g51YFIsba0Y/s1600/20140203_173908.jpg" height="150" width="200" /></a><br />
<more good="" parts=""></more><br />
<br />
Before you declare this a godsend and perform this on your printer consider this piece of heat transfer; the preheat is now absolutely necessary to achieve the higher bed temp. The printer has no feedback mechanism to monitor bed temp so if you hit "Print" the printer will not heat for longer to accommodate the higher temperature threshold; the heating cycle is likely hard-coded into the printer ROM which I do not yet know how to change. Also, given the printer dumps constant current into the bed means the input energy rate is constant; to achieve max temperature the time of heating needs to be increased. This assumes the ambient heat loss rate does not cause the bed temperature to reach steady state before the temperature threshold...<br />
<br />
Later science posts regarding Up Mini:<br />
<br />
<ol>
<li>transient temperature profile for</li>
<li>input current hack for heated bed (and temperature profile after)</li>
<li>hack to lower or remove annoying buzzer</li>
</ol>
Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com13tag:blogger.com,1999:blog-1588984194759318117.post-85975029640866954072013-07-25T20:27:00.000-04:002013-07-27T14:26:25.304-04:00Cake Slice and PA Bot Blast 2013Hi Charles, I'm writing a blog post.<br />
<br />
________________________________________________________________________________<br />
<br />
Part of my joy of moving up to MIT was the fact that I was now in prime vicinity of a more lively roboting community. In the Northeast region, we have well established competitions like the Franklin Institute of Motorama.<br />
<br />
Another regular event in Pennsylvania was PA Bot Blast, held in Bloomsburg every July. My friend Aaron fan from the Georgia Tech Invention Studio convinced me to go, so I convinced my long time bot buddy Charles Guan to make the trip with me. We created enough hoobaloo in MITERS to spawn a small team and soon we had an entire van committed to go. Hence fourth it was time to get prepared as the date loomed closer and closer.<br />
<br />
DDT was definitely going. The new version was completed in late 2012 after Dragon Con in preparation for GMX robot battles where it went undefeated and unscathed. The only work I needed/wanted to do on him was trim the through bolts that hold the frame halves together. This way, the robot was actually invertable.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/-jAS2aIDwFN4/UfGvOjwFEYI/AAAAAAAACLI/sBzNR30g1cQ/s1600/20130710_220109.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://4.bp.blogspot.com/-jAS2aIDwFN4/UfGvOjwFEYI/AAAAAAAACLI/sBzNR30g1cQ/s320/20130710_220109.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">I hope heating those screws don't melt the nylocks</td></tr>
</tbody></table>
<br />
I was previously intending to bring Cake, my old Beetleweight made in 2010/2011, but I had lent it out to some friend going to Robogames and it returned to me... missing a few things.<br />
<br />
Without a waterjet, there was no hopes of finishing the parts needed to make it competitive or solid. Time to move on.<br />
<br />
Instead I opted to make a joke bot. Lets design a wedge with absolutely insane speed for the sole purpose of box rushing people and maybe decking them into the wall. No way it would win, but it would be extremely entertaining to watch and drive.<br />
<br />
I grabbed a pair of 280-sized motors from my spares bin. These motors were surplus back from Florida but had some serious power. First indicator of this were EXTERNAL BRUSH HOUSINGS WITH HUGE CONTACTS. This is of course opposed to the dinky precious metal springs that daintily drape over the commutator. I knew this motor had some serious current carrying capabilities.<br />
<br />
And they did. They drew 3 amps no load.<br />
<br />
To make the robot a tad more reasonable I mated these motors to the 10:1 gearboxes of the ever popular "1000 RPM Gearmotors". First I had to remove the pinions from the old motors. Then I had to secure them to the new splined shafts of the surplus motors. Historically, we know that a press fit simply isnt enough for these motors since their monstrous torque essentially reams out the pinion if any excessive load is on the shaft (i.e. robot weight). I remedied the problem by complimenting the press with a flux and solder treatment.<br />
<br />
With the drive motors finished, I began arranging the parts to develop a chassis design. While a traditional wedge could have worked, I felt it was to boring. Some creative arrangement later turned up an old friend of a robot: the dustpan.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://3.bp.blogspot.com/-90CJxXLgK5E/UfGvwS0jPAI/AAAAAAAACLQ/mYKVu7309vU/s1600/cake+slice.JPG" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="169" src="http://3.bp.blogspot.com/-90CJxXLgK5E/UfGvwS0jPAI/AAAAAAAACLQ/mYKVu7309vU/s320/cake+slice.JPG" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">3D printing frames is cheating</td></tr>
</tbody></table>
<br />
By this time, we only had two days left until the event. The only option was to 3D print the frame on the IDC's Dimension 1200es ABS FDM printer. It saved a lot of time on parts machining but it also introduced some headaches of its own along the way.<br />
<br />
Robot taking shape! Control electronics were selected to hopefully run the powerful motors. I whipped out my 9 year old Scorpion HX esc for the drives, and pulled an orange RX for the control. It was then I discovered the esc was not enough to handle those surplus motor hacks. Sad day. I suppose we will have to compromise with a Pololu 4.41:1 HP gearmotor.<br />
<br />
The wheels were leftover Banebots 40A durometer wheels with a hex bore. I made hubs from some metric hex stock center drilled for the 4mm motor shafts, drilled to hold a 6-32 set screw, and pressed into the BB wheels.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/-i7SzZ2zNfuI/UfGwAY4FAHI/AAAAAAAACLY/9BIGj2rMHQU/s1600/20130719_132640.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://4.bp.blogspot.com/-i7SzZ2zNfuI/UfGwAY4FAHI/AAAAAAAACLY/9BIGj2rMHQU/s320/20130719_132640.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">robut.</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-_exbXfnpiSo/UfGwHxO43mI/AAAAAAAACLg/lKlX5tOGL4w/s1600/20130719_132643.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://1.bp.blogspot.com/-_exbXfnpiSo/UfGwHxO43mI/AAAAAAAACLg/lKlX5tOGL4w/s320/20130719_132643.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">so far so good</td></tr>
</tbody></table>
<br />
To save some time on printing, I elected to make the dustpan bottom from a thin sheet of garolite. This sheet would be held on the bottom using adhesives.<br />
<br />
It was decided that this robot, being made from parts of the robot cake, would refer to its inheritance in some way. Also being a wedge shape, I decided to name it Cake Slice. It would be a part (or slice if you prefer) of Cake, while having a slice-like shape. So brilliant, I know.<br />
<br />
Apparently I don't have any finished photos :(<br />
<br />
On the Friday evening two hours before our departure, I came home hoping to test drive the robot. Unfortunately I left my transmitter on and was unable to practice with the robot. Its first match would also serve as a driving test.<br />
_______________________________________________________________________________<br />
<br />
<b>Game Day</b><br />
<br />
Five hours of Miku later, we arrive at a waffle house and meet Aaron for a 4am meal. From there we venture down the last hour to the Columbia Mall in Bloomsburg to see the wonderful new arena that Jeremy and his parents had put up.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-krK5ljNqk-Y/UfGy08Jl4FI/AAAAAAAACLw/ZSy5FNJYBA8/s1600/20130720_105856.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://1.bp.blogspot.com/-krK5ljNqk-Y/UfGy08Jl4FI/AAAAAAAACLw/ZSy5FNJYBA8/s320/20130720_105856.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">THIS IS IT. jk, test box</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-xKuAGmcIL6U/UfGy0wq2FGI/AAAAAAAACL4/My5DUSxlvQU/s1600/20130720_105913.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://1.bp.blogspot.com/-xKuAGmcIL6U/UfGy0wq2FGI/AAAAAAAACL4/My5DUSxlvQU/s320/20130720_105913.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">builders watching the robot being tested outside the test box</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-W0de1XsWCyA/UfGy1B_ojLI/AAAAAAAACL0/vCwDY1hMNDc/s1600/20130720_111143.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://1.bp.blogspot.com/-W0de1XsWCyA/UfGy1B_ojLI/AAAAAAAACL0/vCwDY1hMNDc/s320/20130720_111143.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">okay, the new arena seriously</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/-l_rltyciQ4I/UfGy2_YlSiI/AAAAAAAACME/Fmia428rKDw/s1600/20130720_185329.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://4.bp.blogspot.com/-l_rltyciQ4I/UfGy2_YlSiI/AAAAAAAACME/Fmia428rKDw/s320/20130720_185329.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">omg prizes! best trophies in the US</td></tr>
</tbody></table>
Being the first builders that morning (we better have after camping out in the parking lot), we picked prime seating in a center row, right above a power outlet.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-J7snvE_iiiA/UfG0FCuqu2I/AAAAAAAACMY/b4W8AVP-0EQ/s1600/20130720_101605.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://2.bp.blogspot.com/-J7snvE_iiiA/UfG0FCuqu2I/AAAAAAAACMY/b4W8AVP-0EQ/s320/20130720_101605.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Aaron's robot ,"Final Exam" without hat</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://3.bp.blogspot.com/-6YotTmjpaFc/UfG0FIw8L7I/AAAAAAAACMc/-yoiU1NvGIk/s1600/20130720_105817.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://3.bp.blogspot.com/-6YotTmjpaFc/UfG0FIw8L7I/AAAAAAAACMc/-yoiU1NvGIk/s320/20130720_105817.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">My two robots DDT and Cake Slice. Washers taped to the front to prevent wheelies</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://3.bp.blogspot.com/-wkEaCAPDGo4/UfG0FWrHvpI/AAAAAAAACMg/rMX50WeNDww/s1600/20130720_105826.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://3.bp.blogspot.com/-wkEaCAPDGo4/UfG0FWrHvpI/AAAAAAAACMg/rMX50WeNDww/s320/20130720_105826.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">delran-bumble:a stepper motor drive robot from out MIT crew</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-hSx0mUXTUNc/UfG0GF-NjuI/AAAAAAAACMw/hzwP4_t3rwU/s1600/20130720_105835.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://2.bp.blogspot.com/-hSx0mUXTUNc/UfG0GF-NjuI/AAAAAAAACMw/hzwP4_t3rwU/s320/20130720_105835.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">threecoil: an innovative flywheel 4-bar flipper robot</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-r2SYAx4UzcI/UfG0GZIrXrI/AAAAAAAACM0/gnocWsO63ug/s1600/20130720_105843.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://1.bp.blogspot.com/-r2SYAx4UzcI/UfG0GZIrXrI/AAAAAAAACM0/gnocWsO63ug/s320/20130720_105843.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Alex Hone's stuff</td></tr>
</tbody></table>
After a smooth check-in and drivers meeting, it was time to begin the fray. Leggo robots!<br />
______________________________________________________________________________<br />
<b>DDT vs Slim Pickens</b><br />
DDT drew the first match of the event against a sheet metal wedge. Slim was based off a viper kit if I recall correctly, and added some extra steel to strengthen the front plate from my horizontal blows. Unfortunately for him, DDT doesnt attack the body as much as he punishes the corners of any robot. DDT ripped and bent up the front wedge enough to high-center Slim and he tapped out.
<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="//www.youtube.com/embed/ImUrA739dl8" width="560"></iframe>
<br />
<b>Cake Slice vs TTI Wedge</b><br />
Titan Tech Industries is developing a series of modular robot kits for interested persons. In this Bot Blast, they are debuting their wedge kit, which looks like a sloped Weta without an active weapon. By this, I mean a classic cheese wedge shape with UHMW wheel guards bend around the frame. My only concerns were CS's tendency to lift up when he charges the opponent. I would need to get a running start to keep the drive aggressive and the front end down.
<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="//www.youtube.com/embed/aSgLO5hnUCc" width="560"></iframe>
<br />
What ended up happening was completely unexpected. I actually stripped the gears running around the box. When I opened them up, it appears the boxes were design to have about 1/5 gear face contact. Ugh. So terrible engineering. If you buy these ever, remember to remove some of the spacers on the intermediate stages to get better contact.<br />
<br />
<b>DDT vs Speed Bump</b><br />
Nooooo! I have to fight one of our own :( Speed bump was a low wedge bot made from the donated frame of a fellow bot builder. It was less than an inch tall, and features a gaussian cross-section double wedge. The top was made of a plastic found in 3-ring binders and I was a bit afraid of blasting through it and hitting the lithium battery.
<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="//www.youtube.com/embed/xKSdgoMw8rg" width="560"></iframe>
<br />
Luckily, there were no fires. The match was also far more difficult than I had imagined. The low angle of the wedge and the flexibility of the binder material made it early impossible to get a bite. My only good shots were the aluminum sides. After a few taps late into the match, Speedy was high-centered and tapped out.<br />
<br />
<b>Cake Slice vs Speed Bump</b><br />
q.q<br />
<br />
<b>DDT vs Dust Pandemonium</b><br />
Now I have to fight the style robot i was originally famous for: the dustpan. Pandemonium was a custom made CF almost-unibody with a meanacing thresher type weapon protruding from the front. He would charge opponents, capture them in the dustpan, and gnaw on their frames with the thresher. As long as I kept my blade out front, I knew I would be able to stay out of the pan and away from the weapon.
<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="//www.youtube.com/embed/tt6rmyUvOXw" width="560"></iframe>
<br />
When the match began, he charged straight at me figuring he would not be able to maneuver around my blade. I hit straight into the gut of the dustpan and luckily hit a seam. That one hit penetrated into his electronics and gave me the fastest KO at 15 seconds.<br />
<br />
<b>Cake Slice vs Guildenstern
</b><br />
Guildenstern is a vertical bar spinner what didn't alarm me at first. But it turns out the bar is asymmetrical, made of steel, and packs quite a punch as seen in its previous matches. For Cake Slice, this would pose a problem because he could probably easily punch through the front wall and hit my gooey insides.<br />
<br />
I added a layer of padding on the inside wall to dampen any blows just in case. I was mainly hoping I could suspend his frame using the dustpan pontoons. This was actually feasible since unlike many other vertical spinners, Guildenstern lacked anti-wedge devices. Either way, all strategies soon went kaput when I lost a drive side early on.<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="//www.youtube.com/embed/Adwz41fRZcE" width="560"></iframe>
<br />
<div style="text-align: center;">
<br /></div>
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/-lEHRqRG38bA/UfG7zHY8NNI/AAAAAAAACNs/OtXby3gfPW4/s1600/20130720_155244.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://4.bp.blogspot.com/-lEHRqRG38bA/UfG7zHY8NNI/AAAAAAAACNs/OtXby3gfPW4/s320/20130720_155244.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">eep.</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/-R6lycfwZ-fY/UfG71atzt9I/AAAAAAAACN0/X8rGE-PfIwU/s1600/20130720_155255.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://4.bp.blogspot.com/-R6lycfwZ-fY/UfG71atzt9I/AAAAAAAACN0/X8rGE-PfIwU/s320/20130720_155255.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">It appears layered ABS is easily ablated. No throwing hits though</td></tr>
</tbody></table>
<br />
<br />
<b>DDT vs Ripto
</b><br />
Ripto is the classic vertical disk design of a talented builder and driver Kyle Singer. He scaled down his beetleweight for this competition to enter this antweight version. He also has gone through thus far undefeated. I knew there would be no mistakes allowed in this match. I could not allow any wasted movement since Kyle could easily capitalize on my gyro dances. I would need to aim for a disabling hit or weapon kill early on.<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="//www.youtube.com/embed/mhCVYHFiH-c" width="560"></iframe>
<br />
<br />
I think I was lucky my first hit. Taking out the drive made things easy for me in that he couldn't hit me in my instability. After that, it went downhill for him. I was able to sneak in behind him and chop up his o-ring wheels.<br />
<br />
<b>DDT vs Ripto (finals)
</b><br />
Same strategy with a little more desperation. This time, it was for the infamous Bot Blast light tree trophy! The hits were far better this time but the result was the same. This version of DDT is an absolute keeper!<br />
<br />
<iframe allowfullscreen="" frameborder="0" height="315" src="//www.youtube.com/embed/50B718UTsJE" width="560"></iframe>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-e_BLBdbGTpg/UfG7hLjoezI/AAAAAAAACNU/OyA7MDwnOUk/s1600/20130720_181110.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://1.bp.blogspot.com/-e_BLBdbGTpg/UfG7hLjoezI/AAAAAAAACNU/OyA7MDwnOUk/s320/20130720_181110.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Before the finals!</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-XN9N0bsOsb4/UfG7kpLU7mI/AAAAAAAACNc/gq_PHp4XR58/s1600/20130720_184308.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="320" src="http://2.bp.blogspot.com/-XN9N0bsOsb4/UfG7kpLU7mI/AAAAAAAACNc/gq_PHp4XR58/s320/20130720_184308.jpg" width="240" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Unhappy bearing trying to escape</td></tr>
</tbody></table>
Cake Slice did was Cake Slice was supposed to do. But DDT performed flawlessly going 5 wins and 0 losses. The match against Dust Pandemonium also went in as the quickest knockout. Below is a shot of DDT and his spoils of war.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/-T3q-y1bcjRQ/UfG7o7QBRpI/AAAAAAAACNk/R5LiB3n1y9I/s1600/20130720_191750.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="320" src="http://4.bp.blogspot.com/-T3q-y1bcjRQ/UfG7o7QBRpI/AAAAAAAACNk/R5LiB3n1y9I/s320/20130720_191750.jpg" width="240" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">DDT and his spoils of war</td></tr>
</tbody></table>
<br />
<br />Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com1tag:blogger.com,1999:blog-1588984194759318117.post-9366975889161524522013-06-08T17:33:00.000-04:002013-06-08T17:33:09.550-04:00More Guavascooter: Speed and Distance TestingToday I took a little adventure to visit my good buddy Chris down over at Bolt IO, a new shiny hardware startup incubator located conveniently close to campus (and chinatown!). Needless to say, I'll be visiting often.<br />
<br />
This trip, for this time anyway, included the use of the T, so I had to park my scooter somewhere on campus. When I returned, I visited the ME graduation banquet and then returned home for a bit. Later, I left my housing again for a meeting with my PI over in building 35. Nowhere throughout the day did I charge guavascooter. This was a perfect additional data point to hopefully better estimate traversal distance. Here is the route:<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-5Xk8RV5lass/UbJPKgeA13I/AAAAAAAACKQ/uzrVxuvDveM/s1600/guavascooter+2nd+ride.png" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="155" src="http://3.bp.blogspot.com/-5Xk8RV5lass/UbJPKgeA13I/AAAAAAAACKQ/uzrVxuvDveM/s320/guavascooter+2nd+ride.png" width="320" /></a></div>
<br />
<br />
A total of 3.5 miles. using the numbers from last post, we expect a battery expenditure of about 1170 mAh per mile. However, today's route only used 3170 mAh, which means approximately 905 mAh were expended per mile. This results in a projected distance of 7.6 miles. Lets say <b>7 miles</b> just to be safe.<br />
<br />
The second test that day was the speed test. I selected the section of road between Amherst Alley and Mass Ave as the trial space. This is a roughly half-mile section of road.<br />
<br />
My timer showed I made the trip in approximately 1 minute and 52 seconds. This meant that my scooter maxed out at about <b>16 miles per hour</b>. That's pretty slow for my tastes considering Razor Wind was estimated to run at 30 miles per hour and Razor Reloaded was to run at ~25. This is not a major issue but if I decide to address it I could change the sprocket ratios or select a new motor.Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com1tag:blogger.com,1999:blog-1588984194759318117.post-81017696503211716062013-06-06T23:05:00.000-04:002013-06-06T23:06:10.174-04:00Cambridge and GuavascooterI made it alive to MIT. Today marks one week of life up here. One week of life walking about because my latest scooter just came today. Discussing the name with Charles, we decided a more fitting name for it was "Guavascooter", as an extension of Melonscooter except using the guava sized SK3 motors.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-C95LrxNb5vU/UbFM1zSN91I/AAAAAAAACJ4/MAFyjXWnVvI/s1600/20130606_225633.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://2.bp.blogspot.com/-C95LrxNb5vU/UbFM1zSN91I/AAAAAAAACJ4/MAFyjXWnVvI/s320/20130606_225633.jpg" width="320" /></a></div>
<br />
Without delay, here comes testing.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-PpqSlbnmnqE/UbFNHuQumHI/AAAAAAAACKA/bMQmxVmvAlY/s1600/Guavascooter+route.png" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="157" src="http://3.bp.blogspot.com/-PpqSlbnmnqE/UbFNHuQumHI/AAAAAAAACKA/bMQmxVmvAlY/s320/Guavascooter+route.png" width="320" /></a></div>
<br />
<br />
Tonight I drove this route to MITERS from my temp housing at Tang. Its about 1.68 miles as indicated by the picture above.<br />
<br />
This route expended 1967mAh of battery capacity. From a 6900mAh pack, this means I could run this route about three times safely assuming voltage drop does not fall below 21V (ESC cutoff).<br />
<br />
Tomorrow, I will determine the max speed of this scooter via time trials down Vassar street. More to post later.<br />
<br />
An additional note, I am no longer using the chatparts.ltd esc in Guavascooter. The current ESC is a elifebike esc, which Charles and I will touch on later in the coming weeks. Cheers!Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com1tag:blogger.com,1999:blog-1588984194759318117.post-67445092703723176002013-05-19T02:41:00.000-04:002013-06-06T23:05:38.810-04:00Gigarazor: The Practical Scooter (Backblogging)About 5-6 weeks ago, I bought one of these from a fellow Georgia Tech Student.<br />
<br />
What is it? That is a fully functional Razor E300 electric scooter. I bought it with the intention of making it even MORE functional.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-0nnzmiIfB7U/UZCaZkm5tqI/AAAAAAAACIs/0wNQOR46EQw/s1600/20130411_192017.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://1.bp.blogspot.com/-0nnzmiIfB7U/UZCaZkm5tqI/AAAAAAAACIs/0wNQOR46EQw/s320/20130411_192017.jpg" width="320" /></a></div>
<br />
<br />
I was looking at Cambridge and Boston now. A larger campus with more bumps of sorts from historical sidewalks and roads. I was planning some seriously legit mods to Razor Reloaded (another scooter you dont know about) but opted for the premade sturdy steel frame foreseeing a busy time ahead of me for the final few weeks of the semester.<br />
<br />
So what was the plan?<br />
<br />
<ul>
<li>new motor</li>
<li>new batteries</li>
<li>proportional control</li>
<li>big switch</li>
<li>power consumption feedback</li>
<li>new controller</li>
<li>LEDs everywhere</li>
</ul>
<br />
<br />
I had bought a Turnigy Aerodrive SK3 6374-149 awhile back and decided it would be my motor choice.<br />
<br />
After removing the old components, a motor mount was fashioned quickly from some 3/8" 7075 plate on the waterjet.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-SwrLZ23BDzo/UZCcArjH30I/AAAAAAAACI8/WGv0QnVGTa8/s1600/20130414_170132.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://1.bp.blogspot.com/-SwrLZ23BDzo/UZCcArjH30I/AAAAAAAACI8/WGv0QnVGTa8/s320/20130414_170132.jpg" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-KGHbY7dtQhY/UZCcDLMFSVI/AAAAAAAACJE/Uim6eY4iaIE/s1600/20130414_170140.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://4.bp.blogspot.com/-KGHbY7dtQhY/UZCcDLMFSVI/AAAAAAAACJE/Uim6eY4iaIE/s320/20130414_170140.jpg" width="320" /></a></div>
<br />
<br />
I had initially picked the Jasontroller as my brushless controller because my other graduating friend was selling his old equipment. Here is a unmodified no-load test from a bench top power supply.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<iframe allowfullscreen='allowfullscreen' webkitallowfullscreen='webkitallowfullscreen' mozallowfullscreen='mozallowfullscreen' width='320' height='266' src='https://www.blogger.com/video.g?token=AD6v5dwS2tCuukQgocbvcIZv7CeMeLmrenx8QsAo7AXCPgXf6w_zDXHaW0loBFSyDpqrKWSvdLmOz5o51v64bGx7Ng' class='b-hbp-video b-uploaded' frameborder='0'></iframe></div>
<br />
<br />
The battery was comprised from generous donations from A123. This 8s3p pack shown below was bridged using copper mesh instead of copper braiding. I figured the equivalent copper cross section couldnt be any worse than the 12ga wire exiting the pack.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-kCVroxG7zBc/UZCcr8L7DQI/AAAAAAAACJM/Um65IQPVyA4/s1600/20130417_193921.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://4.bp.blogspot.com/-kCVroxG7zBc/UZCcr8L7DQI/AAAAAAAACJM/Um65IQPVyA4/s320/20130417_193921.jpg" width="320" /></a></div>
<br />
<br />
Completed and bundled. Yes, that is a DE9 female connector being used as a balance plug. It works wonderfully.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-H-H2XTljfHs/UZCdMi8oGTI/AAAAAAAACJU/4LCQTBpzzvs/s1600/20130418_144820.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://4.bp.blogspot.com/-H-H2XTljfHs/UZCdMi8oGTI/AAAAAAAACJU/4LCQTBpzzvs/s320/20130418_144820.jpg" width="320" /></a></div>
<br />
<br />
By this time I started riding it about campus. It did not have a main switch (on order from RMP) nor did it have a top plate. Regardless, it was hella fun.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-XOKKNwsTwjo/UZCdcQF5_uI/AAAAAAAACJc/hfP-jjMnXuw/s1600/20130418_175230.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://2.bp.blogspot.com/-XOKKNwsTwjo/UZCdcQF5_uI/AAAAAAAACJc/hfP-jjMnXuw/s320/20130418_175230.jpg" width="320" /></a></div>
<br />
<br />
Then came the top plate. Attempting to bend polycarbonate with a 40W heatgun...<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-K8HJIHVEe4s/UZCdzMBT_bI/AAAAAAAACJk/FtKncqC0P5c/s1600/20130417_112653.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="320" src="http://3.bp.blogspot.com/-K8HJIHVEe4s/UZCdzMBT_bI/AAAAAAAACJk/FtKncqC0P5c/s320/20130417_112653.jpg" width="240" /></a></div>
<br />
<br />
...failing to bend polycarbonate with a heatgun.Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com3tag:blogger.com,1999:blog-1588984194759318117.post-24256128425148445492013-05-10T20:59:00.001-04:002015-09-18T14:57:06.627-04:00Thrifty Roboting: The Vex Motor Controller 29The <a href="http://www.vexrobotics.com/276-2193.html">Vex Robotics Motor Controller 29</a> is quickly becoming the go-to esc for insect weight class robots. It offers a small form-factor single channel esc at a low cost of $10. Very minimal; no LEDs, current protection, or temperature protection.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://3.bp.blogspot.com/--HFZaZ8msLg/UY2MPcMojeI/AAAAAAAACFw/sEju2mFN_1w/s1600/20130509_231214.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://3.bp.blogspot.com/--HFZaZ8msLg/UY2MPcMojeI/AAAAAAAACFw/sEju2mFN_1w/s320/20130509_231214.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Vexbox!</td></tr>
</tbody></table>
<br />
The website advertises <b>8.4V</b>, <b>4A</b> max. Roboteers know from experience that these little controllers can be pushed much higher. Some report running as high as 14.8V on some rather beefy 370 sized motors. this type of performance does not go without some minor electrical work.<br />
<br />
The ambiguity arises in the minor modifications. Those who have never hacked about with analog servo boards may be unfamiliar with these methods. This post will provide a step-by step on how to hack your Vextrollers apart and will also conclude with a component level analysis and bench test to decipher their true capabilities.<br />
<br />
<u><b>Modifications:</b></u><br />
<b>Step 1:</b> Deshelling the Casing<br />
The enclosure is two halves of injection molded plastic with some drops of CA applied in the seams. To get the crab meat out, it is as simple as cracking the rather brittle superglue.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/-N5w0FEjIJoc/UY2MtASaXXI/AAAAAAAACGA/-M9Ffux2HLo/s1600/20130509_231321.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://4.bp.blogspot.com/-N5w0FEjIJoc/UY2MtASaXXI/AAAAAAAACGA/-M9Ffux2HLo/s320/20130509_231321.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Stock OEM Vextroller</td></tr>
</tbody></table>
<br />
Apply a sharp knife to the corner and press in until the blade sits within the groove.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://3.bp.blogspot.com/-iSn3j04dMF8/UY2Mi2O4NTI/AAAAAAAACF4/oUIgPRICA4o/s1600/20130509_231428.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://3.bp.blogspot.com/-iSn3j04dMF8/UY2Mi2O4NTI/AAAAAAAACF4/oUIgPRICA4o/s320/20130509_231428.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Applying Knife Edge to Vextroller Casing</td></tr>
</tbody></table>
<br />
Wiggle the knife until the casing begins to pry apart. Repeat this process for all four corners until the shell magically pops off.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-4x9NzWd0i0E/UY2M1zmTHMI/AAAAAAAACGI/ZG58-CfVOg8/s1600/20130509_231601.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://4.bp.blogspot.com/-4x9NzWd0i0E/UY2M1zmTHMI/AAAAAAAACGI/ZG58-CfVOg8/s320/20130509_231601.jpg" width="320" /></a></div>
<br />
<br />
<b>Step 2:</b> Modifying the Power Leads<br />
The blackbox IO model of the Vextroller looks like this:<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-Plh7SHrzaYQ/UY2W1OarXOI/AAAAAAAACHE/z0aHw5XKQYA/s1600/unmodified.png" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="206" src="http://1.bp.blogspot.com/-Plh7SHrzaYQ/UY2W1OarXOI/AAAAAAAACHE/z0aHw5XKQYA/s320/unmodified.png" width="320" /></a></div>
<br />
<br />
To get higher voltage input to the esc, we need to do some splicing. This is what we want in the end:<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-Xzhvsr9ip2k/UY2W3kx42yI/AAAAAAAACHM/_PzbDK43Gew/s1600/modified.png" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="206" src="http://4.bp.blogspot.com/-Xzhvsr9ip2k/UY2W3kx42yI/AAAAAAAACHM/_PzbDK43Gew/s320/modified.png" width="320" /></a></div>
<br />
<br />
Cut the PWM male connector off, and separate the white, black, and red wires from each other.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://3.bp.blogspot.com/-kV4Wpuxn5rA/UY2am3W-rtI/AAAAAAAACHY/i73uyCIfnBU/s1600/20130510_210557.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://3.bp.blogspot.com/-kV4Wpuxn5rA/UY2am3W-rtI/AAAAAAAACHY/i73uyCIfnBU/s320/20130510_210557.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">PWM wires separated. Fourth Wire Created from the Leftovers</td></tr>
</tbody></table>
<br />
<br />
Then solder another black wire to GND (where there is already a black wire).<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-5VTNG25kwqY/UY2ax9O8bAI/AAAAAAAACHg/ulpxpitaImQ/s1600/20130510_210803.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://2.bp.blogspot.com/-5VTNG25kwqY/UY2ax9O8bAI/AAAAAAAACHg/ulpxpitaImQ/s320/20130510_210803.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Black Wire Added to the Underside of the Board</td></tr>
</tbody></table>
<br />
<br />
You should now have 4 wires coming off of three pins. The white (<span style="color: cyan;">signal</span>) and one black (GND) wire will go to your receiver. The red (<span style="color: red;">V_in</span>) and other black (GND) will go towards your power source.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiCWSkj7PHx2mnZY6Yrrrc8q-wTRVzjB_vNJFHmsmdAv1jIjATNgpgRp8u1HSuxTy4QBh-3UYhtvgnm87Ni6FgQXKjoXp52jE5WPIT7ZN_euKF1oDdxURJzy3Km5cJ14W8Ekvhtvw8X7OA/s1600/20130510_210830.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiCWSkj7PHx2mnZY6Yrrrc8q-wTRVzjB_vNJFHmsmdAv1jIjATNgpgRp8u1HSuxTy4QBh-3UYhtvgnm87Ni6FgQXKjoXp52jE5WPIT7ZN_euKF1oDdxURJzy3Km5cJ14W8Ekvhtvw8X7OA/s320/20130510_210830.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Done!</td></tr>
</tbody></table>
<br />
<br />
<b>Step 3:</b> Add Connectors and Protective Coatings<br />
The last step is to add the appropriate connectors that mate to your devices. It is common to have the female PWM cables for the signal since most hobby receivers use male .1" spaced headers. I typically replace the motor connector with 2mm bullets or simply solder onto the motor ends. The entire esc can be covered in a tube of 3/4" OD heat shrink or potted with a rubberized glue. Completely up to you!<br />
<br />
Here is a pair of Vextrollers installed in my Antweight, DDT. I used CA to bind two boards side-by-side and then used breadboard jumpers to connect the V_in and GND together. Because GND is also shared between inputs on the Rx, I only have three wires going to my receiver (expected four) and two wires headed to my power switch. The pair was afterwards wrapped in electrical tape and the leads will be potted in GOOP later.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-LRErzPeGYhE/UY2WTbFelLI/AAAAAAAACG8/5vCW8fiPvzw/s1600/20130501_030517.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://1.bp.blogspot.com/-LRErzPeGYhE/UY2WTbFelLI/AAAAAAAACG8/5vCW8fiPvzw/s320/20130501_030517.jpg" width="320" /></a></div>
<br />
<br />
Congratulations! You now have a simply-elegant insect-class esc. I have created a IGES solid model for the caseless Vextroller for those who wish to integrate it into their CAD. It can be downloaded below:<br />
<br />
<div style="text-align: center;">
<a href="https://www.dropbox.com/s/43026wutyi8qinb/Vextroller%2029.IGS">Download Link for Vextroller 29</a><br />
<br />
<div style="text-align: left;">
<span style="font-size: large;"><b>NOTE</b>:</span> Since you will likely be using this controller with other components that supply power to your receiver (BEC) it is not necessary to add the fourth wire for the Rx GND. Instead, use the original three wires where V_in and GND are used for mains power and signal is the only wire going to the Rx. The device supplying BEC will provide GND connection. This technique will reduce <a href="http://en.wikipedia.org/wiki/Ground_loop_(electricity)">ground loops</a>, which are a major source of noise. In other words:<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-f0PiJVypWmM/UY2kXPyPsEI/AAAAAAAACH8/tbdtQNDbdSc/s1600/modified+sanGL.png" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="206" src="http://2.bp.blogspot.com/-f0PiJVypWmM/UY2kXPyPsEI/AAAAAAAACH8/tbdtQNDbdSc/s320/modified+sanGL.png" width="320" /></a></div>
<br /></div>
</div>
<br />
<u><b>Parts Breakdown:</b></u><br />
Here I have pictures of the top and bottom layout of the board. It can be seen there are some SMT resistors, a tantalum capacitor and some other devices. The main distinguishable components are listed below with datasheet if available.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-eI3Iu7QBPQg/UY2NLq-wkNI/AAAAAAAACGQ/y4bbqinfxJ0/s1600/20130510_200519.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://2.bp.blogspot.com/-eI3Iu7QBPQg/UY2NLq-wkNI/AAAAAAAACGQ/y4bbqinfxJ0/s320/20130510_200519.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Top of the Vex Robotics Motor Controller 29</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/-NcgUrKP1nDI/UY2NNoqVOXI/AAAAAAAACGY/dInF4HSkDps/s1600/20130510_200621.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://4.bp.blogspot.com/-NcgUrKP1nDI/UY2NNoqVOXI/AAAAAAAACGY/dInF4HSkDps/s320/20130510_200621.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Bottom of the Vex Robotics Motor Controller 29</td></tr>
</tbody></table>
<br />
<br />
<br />
<ul>
<li>Microcontroller: <a href="http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en027148">PIC12F615</a></li>
<li>Gate Drivers: 301(?)</li>
<li>Half-Bridges: <a href="http://www.fairchildsemi.com/ds/FD/FDS4935BZ.pdf">FDS4935BZ</a> (Fairchild), <a href="http://www.irf.com/product-info/datasheets/data/irf8313pbf.pdf">IRF8313PbF</a> (International Rectifier)</li>
<li>Voltage Regulator: 2x(?)</li>
</ul>
<br />
<a href="http://blog.aaronbot3000.com/">Aaronbot3000</a> reports the voltage regulator is <b>linear</b> and outputs 4.5V<br />
<br />
Based on these components, the Vextroller should be able to handle <b>30V</b> and <b>6.9A</b> continuous. these values are subject to change as more is learned about the gate driver capability and voltage regulator capability.<br />
<br />
<u><b>Performance:</b></u><br />
Vextrollers will be tested for their maximum voltage ratings as well as their maximum current ratings through a no-load incremental voltage test and a constant voltage incremental load test. From these experiments we expect to detonate two Vextrollers but hope to determine a maximum wattage rating for robot use.<br />
<br />
<u><b>Known Motor-Voltage-Weight Class Pairings:</b></u><br />
Pololu 50:1 - 11.1V - Antweight<br />
Fingertech Silver Spark (11's, 22's, etc...) - 14.8V - Antweight<br />
Fingertech Silver Spark (22's and 33's) - 14.8V - Beetleweight<br />
Kitbots 1000 RPM Motor - 14.8V - Beetleweight<br />
<br />
If you use the Vextroller and would like to share your setup, please let me know so I can add yours to the list of successful pairings! Thanks!Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com13tag:blogger.com,1999:blog-1588984194759318117.post-91496413701227284422013-05-08T16:02:00.001-04:002013-06-06T23:05:56.856-04:00Beyond Unboxing: Chinese E-bike Controller (chatparts.ltd)This post is a preliminary to a much more comprehensive post detailing controller capability that will be made when I am nearby more legit diagnostic equipment. For now, this post will contain my conclusions from observation, use, and light modification.<br />
<br />
The<a href="http://www.etotheipiplusone.net/?p=2387#more-2387"> "Beyond Unboxing" series is inspired by Charles Guan's posts concerning these same type of escs</a>.<br />
<br />
<b>The Thing:</b><br />
I have purchased a marketed <a href="http://www.ebay.com/itm/110911097990?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#shId">24V, 250W brushless controller for e-bikes</a> hopefully as a replacement for Jasontrollers. What caught my eye was the cheaper shipping, faster delivery time, and the seller whose English was grammatically correct. It arrived just yesterday and after some observations, I am very excited about this controller.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-CEcHSz54L78/UYqkfi00U4I/AAAAAAAACDA/rRExwv5jdZQ/s1600/20130507_180949.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://4.bp.blogspot.com/-CEcHSz54L78/UYqkfi00U4I/AAAAAAAACDA/rRExwv5jdZQ/s320/20130507_180949.jpg" width="320" /></a></div>
<br />
The seller even included pre-stripped connectors!<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-qSWqIPO7D5k/UYqlEhHmPWI/AAAAAAAACDI/tIK0rCvyuIM/s1600/20130507_181004.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://3.bp.blogspot.com/-qSWqIPO7D5k/UYqlEhHmPWI/AAAAAAAACDI/tIK0rCvyuIM/s320/20130507_181004.jpg" width="320" /></a></div>
<br />
Its casing was a interesting trapezoidal feature. Still a single tube of extruded aluminum, still two silicon pads on either end captured by two stainless steel brackets. I even think they used the same screws...<br />
<br />
The chatparts esc also has fewer wires. The seller includes a diagram of the connectors (without labeling the individual wires) but there are unfortunately more than 9 connectors on this controller.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-7u75fAkZjIs/UYql7Ct-xRI/AAAAAAAACDU/W-5M0Y6aM3s/s1600/$(KGrHqRHJBwE-dspTE4EBPn98onmr!~~60_12.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="320" src="http://4.bp.blogspot.com/-7u75fAkZjIs/UYql7Ct-xRI/AAAAAAAACDU/W-5M0Y6aM3s/s320/$(KGrHqRHJBwE-dspTE4EBPn98onmr!~~60_12.JPG" width="317" /></a></div>
<br />
In short, it is incomplete. However the function can be deciphers from the connector ends since these are meant to be direct drop-ins for existing EV systems.<br />
<br />
<b>The Comparison:</b><br />
Now lets have a closer look at a jason and chatpart side by side.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-ls4OA1ONl8I/UYqmaE-e6NI/AAAAAAAACDc/YmR3t4iftMM/s1600/20130508_045448.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://1.bp.blogspot.com/-ls4OA1ONl8I/UYqmaE-e6NI/AAAAAAAACDc/YmR3t4iftMM/s320/20130508_045448.jpg" width="320" /></a></div>
<br />
Its smaller... Less thick by about 1/8"<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-I4AaBSB1wUM/UYqm97F0zZI/AAAAAAAACDk/r_8EIUjndmg/s1600/20130508_050052.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://1.bp.blogspot.com/-I4AaBSB1wUM/UYqm97F0zZI/AAAAAAAACDk/r_8EIUjndmg/s320/20130508_050052.jpg" width="320" /></a></div>
<br />
Board looks less janky. The chatparts ESC (bottom) has only SMT components whereas the jason (top) does not. I was also intrigued by the 7 labeled vias at the top left of the esc (in this picture, in this orientation). Those look like programming pins. It may be possible to reverse engineer the software and find out REALLY how this guy works.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-GnSAz47vlR4/UYqnBlNXSII/AAAAAAAACD0/drNkI09F0JE/s1600/20130508_050122.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://1.bp.blogspot.com/-GnSAz47vlR4/UYqnBlNXSII/AAAAAAAACD0/drNkI09F0JE/s320/20130508_050122.jpg" width="320" /></a></div>
<br />
Again, fewer wires.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-MI4MzqJNYY4/UYqnAyMB0dI/AAAAAAAACDs/Kprdy4ZIY3M/s1600/20130508_050542.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://2.bp.blogspot.com/-MI4MzqJNYY4/UYqnAyMB0dI/AAAAAAAACDs/Kprdy4ZIY3M/s320/20130508_050542.jpg" width="320" /></a></div>
<br />
Ah the processor! Everything in here is ST Mirco stuff.<br />
<br />
<b>MOSFETs:</b> STP75NF75<br />
<b>Processor:</b> <a href="http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/CD00231332.pdf">STM8S903K3</a><br />
<br />
<b>Performance:</b><br />
My test rig is just my latest GigaRazor scooter (that none of you know about yet) with a watt meter inline with the power source. Note that this is a sensorless configuration. I will not be able to conclude as to what functions it has but I can at least detail its behaviors.<br />
<br />
<u>Unmodified Test runs:</u><br />
<br />
<ul>
<li>No-load behavior: Ramps up until near max throttle where controller experiences cutoff. Not choppy intermittent behavior, simply cuts-off. Repeatable behavior. However does not affect throttle behavior for subsequent runs. Lets consider this feature Controller Protection.</li>
<li>Load behavior: <b>~20 Amps</b> current limit stock. Does not experience high speed cutoff under load (perhaps I am not traveling quick enough to reach no-load speeds). ESC is cool to the touch.</li>
</ul>
<br />
<br />
The controller was then modified using the solder-blob shunt method.<br />
<br />
<u>Modified Test Runs:</u><br />
<br />
<ul>
<li>No-load behavior: Experiences intermittent cutoff at higher speeds. It is choppy, unlike the unmodified behavior before.</li>
<li>Load behavior: increased acceleration as expected. Choppy behavior as described in no-load experienced in load behavior. Watt meter reads ~50 Amps peak. Case is hot.</li>
</ul>
<br />
<br />
The controller shunt was then lowered to <b>40A</b> and then <b>35A</b> afterwards. The choppy behavior still persisted. I took this opportunity to measure to case surface temperature and discovered it was in excess of <b>120 degrees F</b> AFTER a run at higher current.<br />
<br />
My scooter uses an 8s3p A123 LiFePO4 pack and a <a href="http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=18184">Turnigy Areodrive SK3 6374-149 motor</a>. This means at nominal voltage I should be rotating <b>~3933 RPMs</b>. However at charged voltage I would be <b>~4172 RPMs</b>. For comparable controllers in this application, it exceeds the <a href="http://www.etotheipiplusone.net/?p=1706">infamous RPM limit determined by Charles and Shane</a> years ago. To validate the RPM limit cutoff, I will test no-load conditions again using a 24V nominal battery or PSU.<br />
<br />
<b>Conclusions:</b><br />
I will withhold my final judgement until I can more easily explain its behaviors and features. For now I can summarize the main takeaways:<br />
<br />
<br />
<ul>
<li>Runs sensorless (sensored TBD although it has wires for it)</li>
<li>Possibly has high eRPM controller protection</li>
<li>Possibly has a second method of current limiting</li>
<li>Possibly has over temperature cutoff control</li>
<li>Smaller and cheaper than Jasontroller</li>
<li>No self-learn</li>
</ul>
<br />
<br />
More to come.Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com4tag:blogger.com,1999:blog-1588984194759318117.post-22034838974700665192013-05-07T18:04:00.001-04:002013-05-09T04:26:30.692-04:00The Long AwaitedI fully realize that I have not posted anything new (despite there being absolutely awesome things happening!) since Fall 2012. That is because I was busy. However, I did that thing called graduating and now have oodles of time to back-blog all the good stuff.<br />
<br />
Everyone awaits they day they graduate. I've been hearing it from my peers for the past 4 months, accompanied by tears of joy, tears of sadness, and senioritis. The part of graduating I was anticipating the most was actually commencement ceremony. Not because of the symbolism when walking across the stage, or moving the tassel, but because there were large groups of people present. Time to do something awesome in my last hurrah: Decorate my graduation cap.<br />
<br />
The original plan was to illuminate a piece of acrylic from the side using RGB LED strips. An arduino nano or equivalent uProcessor would control the transitions between the colors. All of this would be powered by one of my numerous 3s lithium polymer batteries. However, I was lazy with the parts ordering. So here is the final instructable on how to make this guy.<br />
<br />
Parts:<br />
<br />
<ul>
<li>graduation cap</li>
<li><a href="http://www.hobbyking.com/hobbyking/store/__8942__Turnigy_High_Density_R_C_LED_Flexible_Strip_Blue_1mtr_.html">1 meter long LED strip</a></li>
<li>3s lipoly battery</li>
<li>polycarbonate U-channel (mcmaster <a class="PartNbrLnk PartNbrVisitedLnk" data-mcm-itm-id="152824" data-mcm-partnbr-seqnbr="1" data-mcm-partnbr="1753K61" href="http://www.mcmaster.com/#1753K61" style="color: purple; display: inline-block; font-family: arial, helvetica, sans-serif; font-size: 12px; line-height: 14px; outline-style: none; text-decoration: none; white-space: nowrap; width: 50px;" title="Add this product to your current order">1753K61</a>)</li>
<li>a switch (min 1/4 W)</li>
<li>wire and misc plugs</li>
</ul>
<br />
<br />
Step 1: Design the acrylic cutout<br />
I designed it using SolidWorks. Began with the diamond shape and then extruded-cut the letters. The logo was generated from importing an image and projecting it onto the background. Using the Spline tools I could trace the more complex geometry.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-9SZi8XjwqRo/UYlx2cuMQ2I/AAAAAAAACCc/kObrsnI7zcs/s1600/cap.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="161" src="http://2.bp.blogspot.com/-9SZi8XjwqRo/UYlx2cuMQ2I/AAAAAAAACCc/kObrsnI7zcs/s320/cap.JPG" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
The material selected was acyrlic. This was because it had excellent optical properties and could be laser cut using the machines at the <a href="http://inventionstudio.org/">Georgia Tech Invention Studio</a>. </div>
<br />
<br />
Step 2: Cut chamfers into the polycarbonate at the bend points<br />
The most important thing to remember about this is to have enough allowance in the bend. I'm not going to discuss k-factors here, but cut away some extra material to allow the corners to meet without stressing the sides of the U. Do not just remove material along the theoretical permissible lines.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-LWTdptuGD6o/UYlvpzqafdI/AAAAAAAACB4/-w741BCiYwU/s1600/20130503_030238.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://3.bp.blogspot.com/-LWTdptuGD6o/UYlvpzqafdI/AAAAAAAACB4/-w741BCiYwU/s320/20130503_030238.jpg" width="320" /></a></div>
<br />
<br />
Step 3: Apply LED strip to the inside of the U-channel<br />
The LED strip I linked too earlier has an adhesive back. This made it much easier to stick to the inside of the channel. Also, I believe the width of this strip is 6mm. Should interface perfectly with the mcmaster part number I also linked earlier.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-S0y1elfw4x8/UYlvsPpltRI/AAAAAAAACCA/o8MEPeuS1Ns/s1600/20130503_030841.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="320" src="http://2.bp.blogspot.com/-S0y1elfw4x8/UYlvsPpltRI/AAAAAAAACCA/o8MEPeuS1Ns/s320/20130503_030841.jpg" width="240" /></a></div>
<br />
<br />
Step 4: Bind the ends of the U-channel to encapsulate the acrylic cutout<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-Vtgxd_DSngc/UYlvw_y2owI/AAAAAAAACCI/U4tooshAp2M/s1600/20130503_031537.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://3.bp.blogspot.com/-Vtgxd_DSngc/UYlvw_y2owI/AAAAAAAACCI/U4tooshAp2M/s320/20130503_031537.jpg" width="320" /></a></div>
<br />
Step 5: Attach to grad cap (hobbyking brand superglue!)<br />
The acyrlic plate actually levitates within the constraints of the polycarb U-channel. If I wanted to reuse these materials, I could unfurl the polycarb channel and simply take everything out...<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-aZXS4iF09MY/UYlvxOgpibI/AAAAAAAACCQ/o0hU5e7rNyI/s1600/20130503_031526.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://1.bp.blogspot.com/-aZXS4iF09MY/UYlvxOgpibI/AAAAAAAACCQ/o0hU5e7rNyI/s320/20130503_031526.jpg" width="320" /></a></div>
<br />
<br />
Step 6: Solder wires and connectors<br />
I recommend adding connectors on both ends of the power switch. One plug will be for your battery, the other allows you to take the cap off without having to extract all your electronic guts. I may update this step to include my wiring harness.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-jf7B3PdwgHY/UYlvy7qPZUI/AAAAAAAACCY/R1lsnhzfDjg/s1600/20130503_182249.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="320" src="http://1.bp.blogspot.com/-jf7B3PdwgHY/UYlvy7qPZUI/AAAAAAAACCY/R1lsnhzfDjg/s320/20130503_182249.jpg" width="240" /></a></div>
<br />
<br />
Step 7: Graduate!<br />
<br />
The cap was well received by everyone (except the fire marshall). As a result, I received lots of air time that afternoon.<br />
<br />
From the GT camera crew there:<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-NxNjyceZHzo/UYl5WRhsjZI/AAAAAAAACCo/Xsz-QdMkdjs/s1600/Untitled.png" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="241" src="http://1.bp.blogspot.com/-NxNjyceZHzo/UYl5WRhsjZI/AAAAAAAACCo/Xsz-QdMkdjs/s320/Untitled.png" width="320" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-qA6DROQTZa4/UYl5jADrkRI/AAAAAAAACCw/j87cllEIXKQ/s1600/901245_10151651361596660_1380673853_o.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="213" src="http://4.bp.blogspot.com/-qA6DROQTZa4/UYl5jADrkRI/AAAAAAAACCw/j87cllEIXKQ/s320/901245_10151651361596660_1380673853_o.jpg" width="320" /></a></div>
<br />
<br />
... and the <a href="http://www.ajc.com/gallery/news/georgia-tech-graduation/g9Ty/#3382450">Atlanta Journal Constitution</a>.<br />
<br />
What a way to cap off the end of a four year adventure. Thank you friends for all the wonderful experiences. I dedicate this work to remember all of you.<br />
<br />
Some Responses from non-GT folk:<br />
<br /><br /><i>":OOOOOOOOOOOOOOOO<br />i want to sex you in the most non gay fashino possible<br />so one of us has to be in cosplay"</i><br /><br /><br />lol... <br /><br /> The next step for me is the legendary MIT!<br />Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com1tag:blogger.com,1999:blog-1588984194759318117.post-6187544779325697902012-12-17T05:55:00.001-05:002012-12-17T06:20:17.565-05:00Xbox 360 Power Supply HackMy most recent scooter (that I built and haven't yet blogged about) uses a 7s2p Lithium Iron Phosphate pack using A123 cells. That is great except my Triton EQ charger can only handle 6s Lithium anything. The obvious solution was to purchase new charging equipment like this beautiful <a href="http://www.hobbyking.com/hobbyking/store/__7523__Turnigy_Accucel_8_150W_7A_Balancer_Charger.html">Turnigy 8s</a> charger capable of 7A continuous. However, it also means I need to find a suitable power supply that can output at least 4.6A at ~23.1V with an input range of 11 to 15V.<br />
<br />
That last requirement removes most laptop power supplies from the list of hopefuls. But, it does shine some light on my favorite gaming platform, the Xbox 360. The 360 variants feature external power supplies with some funky 8 pin output cable. Furthermore there are <a href="http://support.xbox.com/en-US/xbox-360/console-power/power-supply">variants</a> that output some 135W (Xbox 360 Slim) to 203W (Xbox 360 original console) of power. My favorite part about these power supplies is they can be obtained for cheap because they are available everywhere. I grabbed a 150W variant off ebay for $18 free shipping.<br />
<br />
Alright! Hacking time! I received my box and noted many familiar items. Wall plug, power brick, lalala... oh wait.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-3D8i2VLx8XE/UM72NhyUmoI/AAAAAAAAB9s/KPZfRp-owIQ/s1600/20121104_030235.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://1.bp.blogspot.com/-3D8i2VLx8XE/UM72NhyUmoI/AAAAAAAAB9s/KPZfRp-owIQ/s320/20121104_030235.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">8 pins wtf</td></tr>
</tbody></table>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
What the hell is this? Some 8-pin output connector that goes into the Xbox. No clear labeling on the outside to signify the purpose of the pins.<br />
<br />
It turns out, six of the pins are used for power transmission and two are used for a "standby" state. This is probably the minimum power required for the sleeping state on the Xbox (I mean how else do you turn it on using the wireless controllers?). Here is the pinout:<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://krisbox.free.fr/atxto360.GIF" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="288" src="http://krisbox.free.fr/atxto360.GIF" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Courtesy of that website. Kudos go to them.</td></tr>
</tbody></table>
If you were to probe the outputs with a multimeter, you will find a 0V potential between the yellow and black UNTIL you supply the PWR_ENABLE pin with +5V. We are going to simply take the +5V USB line (RED) and connect it to the PWR_ENABLE permanently. Then we will connect the yellow and black wires together in parallel because I don't feel like 22ga PVC jacket wire is ever going to safety transmit 150W.<br />
<br />
Anyway, I unplugged the charger cord, and immediately sliced into the cable behind the connector. Conveniently enough, the cables are colored accordingly.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-8CMYnQsfYt0/UM71A2YjU2I/AAAAAAAAB9Y/GHuHrxEMnJc/s1600/20121104_030218.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://2.bp.blogspot.com/-8CMYnQsfYt0/UM71A2YjU2I/AAAAAAAAB9Y/GHuHrxEMnJc/s320/20121104_030218.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">8 pins, 8 wires. Life is good.</td></tr>
</tbody></table>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Strip away more wire and begin soldering things together. Three BLACK in paralle, three YELLOW in parallel, and connect the BLUE and RED/PURPLE.</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-jwnBfduOuhA/UM71qmKWboI/AAAAAAAAB9k/dywcAJLPmpw/s1600/20121104_030227.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://4.bp.blogspot.com/-jwnBfduOuhA/UM71qmKWboI/AAAAAAAAB9k/dywcAJLPmpw/s320/20121104_030227.jpg" width="320" /></a></div>
<br />
Your choice on the shrink wrap and external connector. A good choice might be a power strip in case you want to power multiple items with it. Since this power supply is single duty, I soldered in an XT60 connector used for hobby RC.<br />
<br />Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com33tag:blogger.com,1999:blog-1588984194759318117.post-5648347080326188022012-12-09T23:43:00.004-05:002012-12-09T23:43:43.969-05:00GMX Part 2: Combat!On Friday evening we hadn't left Atlanta until maybe 10 or 11 because SOME PEOPLE were beast-mode machining their robots. Piled into two cars and drove up to Nashville some 4-5 hours later.<br />
<br />
The next morning we rolled out of bed to the hotel and set up for the Geek Media Expo's second annual Robot Battled event, or Robot Battles 45 if you'll have it. As we entered, the arena provided by Thomas Kenny was being set up. It was a smaller 4 x 4' arena with a pushout. I was slightly worried about DDT's spin-up time and bouncing but it definitely favored Dominant Mode who operates very well in tight conditions.<br />
<div>
<br /></div>
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://3.bp.blogspot.com/-zMZi8ilIRyQ/UMVYcx0ze0I/AAAAAAAAB6k/ftALLGxq2eQ/s1600/20121027_092640.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://3.bp.blogspot.com/-zMZi8ilIRyQ/UMVYcx0ze0I/AAAAAAAAB6k/ftALLGxq2eQ/s320/20121027_092640.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Empty for now...</td></tr>
</tbody></table>
<div>
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-eqMgErTYXEU/UMVYhxqd-iI/AAAAAAAAB7c/R0nN_mKoAVY/s1600/20121027_120434.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://1.bp.blogspot.com/-eqMgErTYXEU/UMVYhxqd-iI/AAAAAAAAB7c/R0nN_mKoAVY/s320/20121027_120434.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">...busy the rest of the day</td></tr>
</tbody></table>
<div>
<br /></div>
<div>
The Georgia Tech crew brought several robots. We had two antweights between Jim and myself, and six beetleweights created by Gabe Ochoa, Dan Hammer, Xo Wang, Aaron fan, Greg (who wasn't actually there), and myself. </div>
<div>
</div>
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-_GDAyz93UBE/UMVYcClPgoI/AAAAAAAAB6c/364V4OTG_Ow/s1600/20121027_092633.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://1.bp.blogspot.com/-_GDAyz93UBE/UMVYcClPgoI/AAAAAAAAB6c/364V4OTG_Ow/s320/20121027_092633.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">GT crew and the compound table.</td></tr>
</tbody></table>
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
There ended up being two other antweights, and 2 other beetleweights. Therefore the ants ran double round robin and the beetles ran double elimination. Needless to say, Georgia Tech was over half the competition.<br />
<div>
<br /></div>
<div>
Robots preparing. Everyone looks nice and undamaged right now.</div>
<div>
<br /></div>
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://1.bp.blogspot.com/-_6s-Y48hY5E/UMVYewzC04I/AAAAAAAAB68/bq6a6Rtsdbk/s1600/20121027_120234.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="320" src="http://1.bp.blogspot.com/-_6s-Y48hY5E/UMVYewzC04I/AAAAAAAAB68/bq6a6Rtsdbk/s320/20121027_120234.jpg" width="240" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Jim Shealy adds tape to the base of Quantum Platypus to dampen the other spinners.</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-zt7cUkObrwM/UMVYYIXWDZI/AAAAAAAAB50/Sk5xnZBRVFQ/s1600/20121027_092534.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="320" src="http://2.bp.blogspot.com/-zt7cUkObrwM/UMVYYIXWDZI/AAAAAAAAB50/Sk5xnZBRVFQ/s320/20121027_092534.jpg" width="240" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Dan Hammer working on "The hammer"</td></tr>
</tbody></table>
<div>
<br /></div>
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-jcokwKUwyBk/UMVYfwZJomI/AAAAAAAAB7E/sJWXl0gbxBM/s1600/20121027_120243.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="320" src="http://2.bp.blogspot.com/-jcokwKUwyBk/UMVYfwZJomI/AAAAAAAAB7E/sJWXl0gbxBM/s320/20121027_120243.jpg" width="240" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Gabe Ochoa, the builder of Mowbot, adding the final preparations.</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-rKvvbPin-_Q/UMVYYxzkrbI/AAAAAAAAB58/anl1BE6K1os/s1600/20121027_092542.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://2.bp.blogspot.com/-rKvvbPin-_Q/UMVYYxzkrbI/AAAAAAAAB58/anl1BE6K1os/s320/20121027_092542.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Mowbot, the champion of the AMMF Robot Battles, sporting a new frame and blade.</td></tr>
</tbody></table>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-xf0Bzd0zvzg/UMVYbbNdTfI/AAAAAAAAB6U/KaeRvWXmPjQ/s1600/20121027_092609.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://2.bp.blogspot.com/-xf0Bzd0zvzg/UMVYbbNdTfI/AAAAAAAAB6U/KaeRvWXmPjQ/s320/20121027_092609.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Quantum Platypus, the enormous overhead disk spinner.</td></tr>
</tbody></table>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://4.bp.blogspot.com/-R2kHrofDk78/UMVYZ6DlucI/AAAAAAAAB6E/mLIFV4ei7gs/s1600/20121027_092555.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://4.bp.blogspot.com/-R2kHrofDk78/UMVYZ6DlucI/AAAAAAAAB6E/mLIFV4ei7gs/s320/20121027_092555.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Gyro King, the massive melty bot made by Aaron Fan and Xo Wang.</td></tr>
</tbody></table>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://3.bp.blogspot.com/-OqBilWa4Bao/UMVYasZwkvI/AAAAAAAAB6M/RIey9LvM2ZQ/s1600/20121027_092600.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://3.bp.blogspot.com/-OqBilWa4Bao/UMVYasZwkvI/AAAAAAAAB6M/RIey9LvM2ZQ/s320/20121027_092600.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">My things. Last minute polycarbonate anti-wedge additions being made.</td></tr>
</tbody></table>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
______________________________________________________________________________</div>
<div>
<br /></div>
<div>
<u>DDT vs Quantum Platypus.</u></div>
<div>
DDT pulled the first match of the competition against fellow GT builder Jim Shealy. QP had a nasty overhead hardened A2/plastic composite disk and a wide polycarbonate base for stability and entrapment. Most other robots would have met their doom, but luckily enough DDT's front disk was large and low enough to barely evade the tips of those bars. This is also the first time I have run DDT -_-<br />
<br /></div>
<div>
<iframe allowfullscreen="allowfullscreen" frameborder="0" height="315" src="http://www.youtube.com/embed/NlxHKffR60E" width="560"></iframe>
</div>
<div>
DDT proved to have no problem with weapon power. Instant spin up time and enough power to keep it bouncing around the arena. This is not quite compensation for its inability to drive inverted, but it certainly helps. Quantum Platypus's foam adhesives worked well at first, but when DDT struck frame things began to fall apart. DDT wins by JD.<br />
<br />
I feel bad for destroying the floor.</div>
<div>
<br /></div>
<div>
<u>Dominant Mode vs Gyro King</u><br />
Dang! First beetle match of the morning is going to be a big one. Gyro King is a melty brain robot with large 35mm brushless motors for wheels and a solid aluminum frame waterjet from a single billet of 1.5" aluminum. To add to its impressiveness, its motor controllers and bluetooth communications were custom made AND it has hardened s7 teeth. Dominant Mode's drum was rather soft 4130 so I was anticipating the worst. My initial strategy was to box rush, but it doesn't always work out as planned.<br />
<div style="text-align: center;">
<br /></div>
<div style="text-align: center;">
<iframe allowfullscreen="allowfullscreen" frameborder="0" height="315" src="http://www.youtube.com/embed/aieH2qoVXE0" width="560"></iframe>
</div>
<br />
<div style="text-align: center;">
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-jvEcXwYDubs/UMVYeXQTUYI/AAAAAAAAB60/DD2TyIFAL60/s1600/20121027_111255.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://2.bp.blogspot.com/-jvEcXwYDubs/UMVYeXQTUYI/AAAAAAAAB60/DD2TyIFAL60/s320/20121027_111255.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Dom takes a nice bite from the tooth support after removing the S7 teeth.</td></tr>
</tbody></table>
<div style="text-align: justify;">
<span style="text-align: left;">Gyro King was having trouble spinning up. It was designed to spin to over 6000 RPMs but was only getting about 2000. Had it been up to full power it might have been far worse for me considering the number of missed rushes. But Dom removed the S7 teeth by shearing the bolts and nearly ejected Gyro King from the arena. The hit jarred the HDPE dead weights in the robot and high centered its drive wheels. Dom wins by KO.</span></div>
</div>
</div>
<div>
<br /></div>
<div>
<u>DDT vs Hardboiled</u><br />
Return to the antweights to fight last year's winner of GMX Robot Battles. Hardboiled was a fast wedge that didn't show and visible weaknesses. A good driver and reliable drive train was enough for it to clench its first round victory against Green Reaper so I expected him to keep on DDT such that I could not spin up. We would see how well the disk spin up time would be now.<br />
<br />
<iframe allowfullscreen="allowfullscreen" frameborder="0" height="315" src="http://www.youtube.com/embed/sOX332bmQKs" width="560"></iframe>
<br />
Seems more than sufficient. Even under load, I could torque the disk and spin both robots apart. This bodes very well for DDT seeing as how disk spin up has plagued the old version. DDT wins with an odd flipping slice.<br />
<br />
DDT ended up fighting Hardboiled twice more for the round robin format and the championship. All the matches had similar outcomes with equal or greater amounts of bouncing. DDT ends up victorious in both cases. </div>
<div>
<br /></div>
<div>
<u>Dominant Mode vs Gregbot</u><br />
Gregbot (or Critical Space Item if you prefer) is a creation of Greg Shikman from Cooper Union. We still have his robot from Dragon Con for whatever reason, and allowed us to run it for GMX. Well, it won its first match against The Hammer and now comes to fight Dominant mode. Gregbot has an overpowered drive train sufficient for 12-pound robots and has an unfathomable translation speed. Gregbot has the potential to really boss Dom around if only it was controllable >_><br />
<br />
<iframe allowfullscreen="allowfullscreen" frameborder="0" height="315" src="http://www.youtube.com/embed/4YYfA1_t8rg" width="560"></iframe>
<br />
Gregbot ended up flipping early from hitting the wall with its springy steel frame. From then on, it was pretty much over. </div>
<div>
<br /></div>
<div>
<u>Dominant Mode vs Spiky Turtle Screwy Thing</u><br />
I don't remember the name of this robot exactly, but it was driven by a bright young fellow with a lot of potential. The robot's body was a inverted cake pan and had all sorts of screws sticking out of it as a defense.<br />
<br />
<iframe allowfullscreen="allowfullscreen" frameborder="0" height="315" src="http://www.youtube.com/embed/IgYbfIo_7oU" width="560"></iframe>
<br />
I tried my best to not destroy it so I flipped it once and pushed it out. The humane kill for the trutle:)</div>
<div>
<br /></div>
<div>
<u>Dominant Mode vs Mowbot (Finals!)</u><br />
Finals time! Mowbot suffered some pre-competition damage and was reduced to a pushy bot with a reliable drivetrain. In its last match against Gyro King it suffered a battery short as it was exiting the arena had to be escorted out of the hotel in a fiery bucket. But no harm done, Mowbot was back in action in no time despite looking a bit like it was slapped with baby powder.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-SRDZKxrGOzI/UMVYkNAxCvI/AAAAAAAAB78/YwjQGjl2MX0/s1600/20121027_124008.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://4.bp.blogspot.com/-SRDZKxrGOzI/UMVYkNAxCvI/AAAAAAAAB78/YwjQGjl2MX0/s320/20121027_124008.jpg" width="320" /></a></div>
<br />
Gabe and I both knew that we would lock in a pushy match if we went head on because his front and rear wedges were angled to avoid the drum but contact the frame first. I would try and avoid a head on confrontation like that and instead aim for his corners.<br />
<br />
When the match began, he had me where I didn't want to be: pinned against the wall after head-on contact. However when he backed up, I struck the front corner which opened up his front panel and exposed his battery.<br />
<br />
<iframe allowfullscreen="allowfullscreen" frameborder="0" height="315" src="http://www.youtube.com/embed/L_jHPTEFDV0" width="560"></iframe>
<br />
After a brief pause we decided to go pushy bots for the rest of the match. The crowd cheered for good sportsmanship and more robot fighting. However the first charge by both robots was the killing blow. Mowbot darted past Dom with its battery hanging out and Dom tagged the trailing battery, pulling it out of its connector. Dom wins in a hilarious final moment. </div>
<div>
<br /></div>
<div>
<u>Antweight Rumble</u><br />
At the conclusion of the antweight bracket, we held a small rumble with the three remaining robots in the antweight class.<br />
<br />
<iframe allowfullscreen="allowfullscreen" frameborder="0" height="315" src="http://www.youtube.com/embed/v4YWBt-XXhA" width="560"></iframe>
<br />
It turned into a robot dance-off with DDT suggesting its name should be DDR.</div>
<div>
<br /></div>
<div>
<u>Beetleweight Rumble</u></div>
<div>
Two words: Pure. Chaos. Dan and I had agreed to hit weapon to weapon but it seemed like Thomas wanted some action first. By the time Dan and I had any sort of contact, Dom was missing some screws on the side plates. Then, I missed his weapon and fed him my weakened side...<br />
<br /></div>
<iframe allowfullscreen="allowfullscreen" frameborder="0" height="315" src="http://www.youtube.com/embed/HX9ePJFNqUM" width="560"></iframe>
<br />
Dominant Mode has never had that much damage before. Both sides incompacitated and a drum bearing shattered. It turns out Dan's robot (The Hammer) pierced through the Ti around the front cap and pulled the entire assembly out. I later gave him those parts as a trophy.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiOraYC9JolFQfTu3b2ELmLymq5bSHZsKYm4M92UmuVq8OucGEK-MTZVnXkKpokrFc3qhKJhyqPWJHoSEXtaP6Zk4cEQUmidNnq1uMPg_LNd5-Hq5qqSo6lcgIqoqOs3_N5RqUJk3ulFDk/s1600/20121027_131516.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiOraYC9JolFQfTu3b2ELmLymq5bSHZsKYm4M92UmuVq8OucGEK-MTZVnXkKpokrFc3qhKJhyqPWJHoSEXtaP6Zk4cEQUmidNnq1uMPg_LNd5-Hq5qqSo6lcgIqoqOs3_N5RqUJk3ulFDk/s320/20121027_131516.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">The drum sounded like maracas because of the loose balls inside.</td></tr>
</tbody></table>
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-FdZYHn6FsKY/UMVYljSjrxI/AAAAAAAAB8Q/gg2ovq_ya4k/s1600/20121027_131527.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://2.bp.blogspot.com/-FdZYHn6FsKY/UMVYljSjrxI/AAAAAAAAB8Q/gg2ovq_ya4k/s320/20121027_131527.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Boom.</td></tr>
</tbody></table>
<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://2.bp.blogspot.com/-lpfTfEhLL44/UMVYo3pXAUI/AAAAAAAAB8w/OADOaC_rjDU/s1600/20121030_032604.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://2.bp.blogspot.com/-lpfTfEhLL44/UMVYo3pXAUI/AAAAAAAAB8w/OADOaC_rjDU/s320/20121030_032604.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">Dan Hammer's trophy from me.</td></tr>
</tbody></table>
<br />
<div>
<br /></div>
<div>
Conclusions<br />
Both robots did well but its clear that that Dom needs work. The frame is still vulnerable to horizontal spinners regardless of the angled sides. The inner rails were also tweaked and bent so there needs to be more work in stiffening the front portions of the frame.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-NU71OPduWOk/UMVYm91pdSI/AAAAAAAAB8Y/xh2YQaDugfM/s1600/20121027_225258.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://3.bp.blogspot.com/-NU71OPduWOk/UMVYm91pdSI/AAAAAAAAB8Y/xh2YQaDugfM/s320/20121027_225258.jpg" width="320" /></a></div>
<br /></div>
<div>
The entire competition was pretty rushed for the competitors because of the low number of robots. However, spare batteries and maybe six chargers kept us all going. Given the excitement of the group, I have no doubts we will return to GMX and Robot Battles again!<br />
<br />
Big thanks to Xo Wang and Dan Hammer for the excellent video captures! Also thanks to Thomas, GMX, and the MTRAS crew for a great event! On behalf of the Georgia Tech crew, we thank you for a wonderful time!<br />
________________________________________________________________________________<br />
<br />
Other awesome moments of the event.<br />
<u>The Hammer vs Gregbot (grudge match)</u></div>
<iframe allowfullscreen="allowfullscreen" frameborder="0" height="315" src="http://www.youtube.com/embed/GBt_am4NXm4" width="560"></iframe>
<br />
<br />
<u>The Hammer vs Gyro King</u><br />
<iframe allowfullscreen="allowfullscreen" frameborder="0" height="315" src="http://www.youtube.com/embed/6PKhThVg-ag" width="560"></iframe>
<br />
<br />
<u>Also, the mini highlight reel</u><br />
<iframe allowfullscreen="allowfullscreen" frameborder="0" height="315" src="http://www.youtube.com/embed/uE7XjYvlVoA" width="560"></iframe>
</div>
Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com2tag:blogger.com,1999:blog-1588984194759318117.post-9327429961357512082012-10-28T13:16:00.000-04:002012-10-28T13:16:39.719-04:00GMX Part 1: PreparationThose who have seen the beetleweight rumble from the AMMF event will remember that Dominant Mode's drive began failing at the end. With GMX on October 26th, it was time to investigate the source of these issues.<br />
<br />
<table align="center" cellpadding="0" cellspacing="0" class="tr-caption-container" style="margin-left: auto; margin-right: auto; text-align: center;"><tbody>
<tr><td style="text-align: center;"><a href="http://3.bp.blogspot.com/-ktZmx_fDYdM/UIzI8_2p9MI/AAAAAAAAB3c/dsmz9vw8F9c/s1600/20121017_133051.jpg" imageanchor="1" style="margin-left: auto; margin-right: auto;"><img border="0" height="240" src="http://3.bp.blogspot.com/-ktZmx_fDYdM/UIzI8_2p9MI/AAAAAAAAB3c/dsmz9vw8F9c/s320/20121017_133051.jpg" width="320" /></a></td></tr>
<tr><td class="tr-caption" style="text-align: center;">oops</td></tr>
</tbody></table>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
That doesn't look healthy. The cylindrical shaped piece on the table is the front bushing for the KW motor, which had fallen out in all the excitement. It was accompanied by a nice layer of brass pinion dust as it seems to have evaporated in the misalignment. </div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
I determined that the main faults of this mod were the improper mating of the KW motor to the 280's face plate mount and the inadequate length of shaft used to secure the brass pinion. Because the stock face plate was not intended to mate to these motors, it allowed all sorts of slop in the alignment of the gears. To reach the first cluster gear, the pinion had to be mounted on the tip of the KW motor since the KW motor shaft was sufficiently shorter than the 280's. This meant there was a poor friction connection between the motor and the pinion, and an even worse connection between the pinion and its first cluster gear. No amount of JB Weld could remedy the situation. </div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
The solution was the remake the motor face plate. This new version would need to have features to properly made the motor concentrically to the gearbox and bring the motor shaft closer to the first cluster gear. I found that a simple flat of 1/8" aluminum was sufficient. </div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-iOOKefphUxw/UIzI-PFiJpI/AAAAAAAAB3k/H-rFle10was/s1600/20121018_173500.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://4.bp.blogspot.com/-iOOKefphUxw/UIzI-PFiJpI/AAAAAAAAB3k/H-rFle10was/s320/20121018_173500.jpg" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
I made several mistake in the model, but I had the main bolt pattern correct so I was able to match drill the new piece.</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-p5qTXga82bQ/UIzI-odR-bI/AAAAAAAAB3s/cYbP_--yuWs/s1600/20121018_174338.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://1.bp.blogspot.com/-p5qTXga82bQ/UIzI-odR-bI/AAAAAAAAB3s/cYbP_--yuWs/s320/20121018_174338.jpg" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
The full length of the pinion is now available for contact despite being pressed fully onto the shaft. This was complimented with JB Weld. The internal shafts in the gearbox did stick out the back of the new face plate so the entire end was belt sanded to make that surface flush. For the record, the main two screws that bolt through the gearbox are M2.5 and the pins are 2mm dia. I will make this face plate available as soon as I develop a proper model.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
The gearbox and resulting combination. Because I couldn't find the loctite, I opted to JB Weld everything. Hopefully, its insane bonding power will be sufficient for holding screws.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Meanwhile, I have been planning a new antweight in light of Dragon Con Robot Battles. Colson Bot was fun, but not entertaining enough for my tastes. It was time to revive the champion of entertainment: DDT.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
This time around, the goals were to increase the rigidity of the frame and ease manufacturing. For me, this basically meant waterjet, waterjet, waterjet.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-0yY9T9ASGIU/UI1kAmkUuMI/AAAAAAAAB4M/7Q-55vT9NSs/s1600/iso+1.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="161" src="http://4.bp.blogspot.com/-0yY9T9ASGIU/UI1kAmkUuMI/AAAAAAAAB4M/7Q-55vT9NSs/s320/iso+1.JPG" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
The main idea was to waterjet two slabs of UHMW and stack them together to compose the main frame. The weight for this upgrade would come from a smaller battery and smaller drive motors. The banebots 24:1 gearmotors were overkill for moving an antweight. Instead I opted for the brass micro gearmotors found at pololu. These would be belted to two dead shafts holding the drive wheels. This drive assembly would be mounted to 1/8" 6061 aluminum plates to keep everything in alignment; I wouldn't trust UHMW to stay rigid enough.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-lt5bOGkQqLU/UI1kk_L0u3I/AAAAAAAAB4U/J3UMgMYa_Mc/s1600/DDT+Ultimate.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="156" src="http://4.bp.blogspot.com/-lt5bOGkQqLU/UI1kk_L0u3I/AAAAAAAAB4U/J3UMgMYa_Mc/s320/DDT+Ultimate.JPG" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
The newest version sunk these plates into the UHMW sides. While the disk remained the same, the weapon was upgraded to a Hacker A20-20L. Similarly, the battery was decreased to 460 mAh, but increased voltage to 11.1 V. This meant approximately 11 kRPMs!</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-kmEhoDRI-ps/UI1lTyUdZsI/AAAAAAAAB4c/STJgU1hf_dg/s1600/20121022_040009.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://3.bp.blogspot.com/-kmEhoDRI-ps/UI1lTyUdZsI/AAAAAAAAB4c/STJgU1hf_dg/s320/20121022_040009.jpg" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
The frame was waterjet with through holes for alignment. First some small nails were inserted to keep it together. Then the side plates could be pressed in and drilled. This assisted in assembly of the rest of the machine. </div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-90oa3qzIQ-U/UI1lU0uE4AI/AAAAAAAAB4k/vfPlKI3uwgQ/s1600/20121022_040035.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://1.bp.blogspot.com/-90oa3qzIQ-U/UI1lU0uE4AI/AAAAAAAAB4k/vfPlKI3uwgQ/s320/20121022_040035.jpg" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-neHgNw1IqaM/UI1mdPDZCxI/AAAAAAAAB5M/p-7PIZBCAq4/s1600/20121023_140149.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://4.bp.blogspot.com/-neHgNw1IqaM/UI1mdPDZCxI/AAAAAAAAB5M/p-7PIZBCAq4/s320/20121023_140149.jpg" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Drive module. Those are M1.6 cap screws that go through the front plate of the pololu gearmotors. The dead shaft is 1/4" delrin for the time being.</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-cquTVn5IG8g/UI1lVhEhefI/AAAAAAAAB4s/p4C7kgeYMjI/s1600/20121023_230926.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://3.bp.blogspot.com/-cquTVn5IG8g/UI1lVhEhefI/AAAAAAAAB4s/p4C7kgeYMjI/s320/20121023_230926.jpg" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
DDT's frame quickly coming together! Top plates are made from 5XXX anodized aluminum for the purpose of engraving logos later.</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-3FVuqdsQU98/UI1lW3wueTI/AAAAAAAAB40/_BXzIp7lefs/s1600/20121023_230934.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://1.bp.blogspot.com/-3FVuqdsQU98/UI1lW3wueTI/AAAAAAAAB40/_BXzIp7lefs/s320/20121023_230934.jpg" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
The belt system for the drive. The motor side pulley is 1/2" OD for a 3/32" urethane belt. The wheel side has a 5/8" OD and is made of delrin. To simplify the assembly, I am using the bearing properties of delrin instead of opting for bearings or bushings.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-Ta5QispaKpI/UI1nWfsh3BI/AAAAAAAAB5Y/BgxN7CjiNVU/s1600/20121025_132735.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="240" src="http://1.bp.blogspot.com/-Ta5QispaKpI/UI1nWfsh3BI/AAAAAAAAB5Y/BgxN7CjiNVU/s320/20121025_132735.jpg" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
When I had first purchased the new lite flite wheels for the robot, I had planned on using larger 2.5" diameter wheels. Now that I inspect the design, it would must better benefit from smaller wheels. With only 2 days before the competition, I decided to try turning neoprene rubber. I shoved a 1/2" aluminum shaft into the inner diameter of the foam wheels and placed them side by side on my lathe. I spun them at 755 RPM and made .03" passes with a sharp carbide bit. It was messy but returned great results.</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://1.bp.blogspot.com/-UmbdsM8k3Lw/UI1lYF-bVvI/AAAAAAAAB48/qHSBXUzh3Hw/s1600/20121025_142735.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="320" src="http://1.bp.blogspot.com/-UmbdsM8k3Lw/UI1lYF-bVvI/AAAAAAAAB48/qHSBXUzh3Hw/s320/20121025_142735.jpg" width="240" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
The top cover after engraving. Included is the molecule so others can make the connection. DDT the pesticide, killing the antweight robots.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<br />Jamison Gohttp://www.blogger.com/profile/02936583009920106854noreply@blogger.com1